Bandana Bib Designed by Tracy Henwood of Desert Rose Designs 1cm seam allowance included Page 1 of two 1cm seam allowance included. Pattern Instructions: Cut both pattern pieces out and match at the match point marked on part A and B. Sticky tape together. Cutting Instructions Place pattern on fold of fabric and cut one piece from outer fabric. A printed cotton works well. Cut one from a backing fabric such as flannel or terry. An absorbant fabric is best. Sewing. Place the right sides together and sew with a 1 cm seam allowance all the way around. Leaving a gap for turning where indicated on pattern. Trim and clip curves and points. Turn Bib through opening left. Topstitch close to the edge of the bib to close the opening used for turning. Appy a snap or velcro to the rounded ends as a closure.
© Copyright 2021