Patriotic Pop Set Wall Quilt 47" x 47" Table Runner 19" x 50½" Placemat 14" x 18" Set Designed By: Sue Harvey & Sandy Boobar of Pine Tree Country Quilts Finished Block Sizes: 9" x 9" for wall quilt and runner and 12" x 12" for placemats Number of Blocks: 16 for wall quilt, 5 for runner, and 4 for placemats www.quiltingtreasures.com 1 Patriotic Pop Set QUILT FABRIC REQUIREMENTS Design: 22750 N 22754 Z 22751 N 22755 N 22752 B 22755 R 22753 N 22751 B WALL QUILT Yards 22750 N 1 22751 N ⅝ 22752 B ½ 22753 N ¼ 22754 Z ¾ 22755 N 1¼ 22755 R ⅔ 22751 B (Backing only) 3¼ 22755 R: Red Texture • Cut (7) 2¾" x WOF strips; recut into (64) 2¾" G squares and (16) 2¾" x 5" H rectangles Cutting Directions WOF = Width of fabric from selvedge to selvedge. Label all pieces with the letters/numbers given in the cutting list. These letters are used to identify the pieces throughout the instructions. 22751 B: Flag Print (Backing Only) • Cut (2) 55" x WOF pieces for backing Navy Star Blocks Note: Use a ¼" seam allowance for all stitching. 22750 N: Ribbon/Star Print • Cut (1) 5" x WOF strip; recut into (8) 5" A squares • Cut (5) 5" x WOF strips for outer border 1. Draw a diagonal line on the wrong side of each navy C square. 22751 N: Flag Print • Cut (3) 2¾" x WOF strips; recut into (32) 2¾" E squares • Cut (2) 3⅛" x WOF strips; recut into (16) 3⅛" squares, then cut in half diagonally to make 32 J triangles 2. Place a marked C square right sides together on one end of a white B rectangle. Stitch on the marked line. Trim seam allowance to ¼". Press the navy triangle to the right side. Repeat with a second C square on the remaining end of the B rectangle to complete (1) B unit. Repeat to make (16) B units total. Repeat with the remaining marked C squares and blue D rectangles to make (16 D) units. 22752 B: Blue Paisley Print • Cut (4) 2¾" x WOF strips; recut into (32) 2¾" x 5" D rectangles 22753 N: Zigzag Stripe • Cut (1) 5" x WOF strip; recut into (8) 5" F squares 22754 Z: White Dot • Cut (5) 2¾" x WOF strips; recut into (16) 2¾" x 5" B rectangles and (32) 2¾" I squares • Cut (2) 3⅛" x WOF strips; recut into (16) 3⅛" squares, then cut in half diagonally to make 32 K triangles Make 16 22755 N: Navy Texture • Cut (5) 2¾" x WOF strips; recut into (64) 2¾" C squares • Cut (4) 1½" x WOF strips; recut into (2) 1½" x 36½" strips and (2) 1½" x 38½" strips for inner border • Cut (5) 2¼" x WOF strips for binding www.quiltingtreasures.com Make 16 3. Sew a B unit to opposite sides of each ribbon/star A square to make (8) center rows. Press seams toward the A squares. 4. Stitch a flag E square to each end of the D units to make (16) top/bottom rows. Press seams toward the E squares. 2 Patriotic Pop Set 5. Sew a center row between (2) top/bottom rows to complete (1) 9½" x 9½" navy star block. Press seams toward the center row. Repeat to make (8) blocks total. 5. Sew an H unit to opposite sides of each F unit to make (8) center rows. Press seams toward the H units. 6. Stitch a JK unit to each end of the D units to make (16) top/bottom rows. Press seams toward the D units. 7. Sew a center row between (2) top/bottom rows to complete (1) 9½" x 9½" red star block. Press seams toward the top/bottom rows. Repeat to make (8) blocks total. Make 8 Red Star Blocks 1. Draw a diagonal line on the wrong side of each red G square and white I square. Make 8 2. Use marked G squares and blue D rectangles to make (16) D units referring to step 2 for navy star blocks. Repeat with the marked I squares and red H rectangles to make (16) H units. Make 16 Quilt Assembly: Note: Refer to the exploded quilt diagram on page 4 throughout the following steps. 1. Join (2) red star blocks and (2) navy star blocks to make a row. Press seams toward the navy Star blocks. Repeat to make (4) rows total. Make 16 3. Place a marked G square right sides together on opposite corners of a stripe F square. Stitch on the marked lines. Trim seam allowances to ¼". Press the red corners to the right side. Repeat on the remaining corners of the F square to complete (1) F unit. Repeat to make (8) F units total. 2. Join the rows to complete the 36½" x 36½" quilt center, turning every other row end for end. Press seams in one direction. 3. Sew the 1½" x 36½" navy texture strips to opposite sides and the 1½" x 38½" strips to the top and bottom. Press seams toward the strips. 4. Sew the 5" ribbon/star border strips short ends together to make a long strip. Press seams to one side. Cut into (2) 38½" strips and (2) 47½" strips. Sew the 38½" strips to opposite sides and the 47½" strips to the top and bottom to complete the quilt top. Press seams toward the strips. Make 8 4. Stitch a flag J triangle to a white K triangle on the long diagonal edges to make a JK unit. Press seam toward the J triangle. Repeat to make (32) JK units total. 5. Remove the selvedge edges from the backing pieces. Join the pieces on the long edges with a ½" seam allowance. Press seam open. Trim the side edges to make a 55" x 55" backing piece. Make 32 www.quiltingtreasures.com 3 Patriotic Pop Set 6. Layer, quilt, and bind using your favorite methods and the navy texture binding strips to complete the quilt. Exploded Quilt Diagram www.quiltingtreasures.com 4 Patriotic Pop Set TABLE RUNNER FABRIC REQUIREMENTS Design: 22750 N 22754 Z 22751 N 22755 N 22752 B 22755 R 22753 N 22751 B TABLE RUNNER Yards 22750 N ⅝ 22751 N ⅜ 22752 B ¼ 22753 N ¼ 22754 Z ½ 22755 N ⅞ 22755 R ⅜ 22751 B (Backing only) 1⅔ 22751 B: Flag Print (Backing Only) • Cut (2) 27" x WOF pieces for backing Cutting Directions Navy and Red Star Blocks Note: Use a ¼" seam allowance for all stitching. WOF = Width of fabric from selvedge to selvedge. Label all pieces with the letters given in the cutting list. These letters are used to identify the pieces throughout the instructions. 1. Refer to steps 1 and 2 of the navy star blocks section (page 2) for the Wall Quilt to make (10) B units and (6) D units. Set (4) B units aside for Runner assembly. 22750 N: Ribbon/Star Print • Cut (1) 5" x WOF strip; recut into (3) 5" A squares • Cut (4) 2½" x WOF strips for outer border 22751 N: Flag Print • Cut (2) 2¾" x WOF strips; recut into (20) 2¾" E squares • Cut (1) 3⅛" x WOF strip; recut into (10) 3⅛" squares, then cut in half diagonally to make 20 J triangles Make 10 Make 6 2. Refer to steps 3, 4, and 5 (page 2) to make (3) 9½" x 9½" navy star blocks. 22752 B: Blue Paisley Print • Cut (2) 2¾" x WOF strips; recut into (10) 2¾" x 5" D rectangles 22753 N: Zigzag Stripe • Cut (1) 5" x WOF strip; recut into (2) 5" F squares 22754 Z: White Dot • Cut (3) 2¾" x WOF strips; recut into (10) 2¾" x 5" B rectangles and (20) 2¾" I squares • Cut (1) 3⅛" x WOF strip; recut into (10) 3⅛" squares, then cut in half diagonally to make 20 K triangles Make 3 3. Refer to steps 1, 2, 3, and 4 of the red star blocks section (page 3) for the Wall Quilt to make (4) D units, (10) H units, (2) F units, and (20) JK units. Set (6) H units and (12) JK units aside for Runner assembly. 22755 N: Navy Texture • Cut (3) 2¾" x WOF strips; recut into (32) 2¾" C squares • Cut (3) 1¼" x WOF strips for inner border • Cut (4) 2¼" x WOF strips for binding 22755 R: Red Texture • Cut (3) 2¾" x WOF strips; recut into (16) 2¾" G squares and (10) 2¾" x 5" H rectangles www.quiltingtreasures.com 5 Make 4 Make 10 Make 2 Make 20 Patriotic Pop Set 4. Refer to steps 5, 6, and 7 (page 3) to make (2) 9½" x 9½" red star blocks. 3. Join the navy star and red star sections to complete the 14" x 45½" runner center. Press seams to one side. 4. Sew the 1¼" navy texture strips short ends together to make a long strip. Press seams to one side. Cut into (2) 45½" strips and (2) 15½" strips. Sew the 45½" strips to the long sides and the 15½" strips to the short ends of the runner center. Press seams toward the strips. 5. Sew the 2½" ribbon/star print strips short ends together to make a long strip. Press seams to one side. Cut into (2) 47" strips and (2) 19½" strips. Sew the 47" strips to the long sides and the 19½" strips to the short ends to complete the runner top. Press seams toward the strips. Make 2 Runner Assembly Note: Refer to the exploded runner diagram (below, right) throughout the following steps. 6. Remove the selvedge edges from the backing pieces. Join the pieces on the 27" edges with a ½" seam allowance. Press seam open. Trim the ends to make a 27" x 59" backing piece. 1. Sew a JK unit to each end of the remaining H units to make (6) pieced strips. Press seams toward the JK units. Sew a pieced strip to opposite sides of each navy Star block to make (3) 9½" x 14" navy star sections. Press seams toward the navy star blocks. 7. Layer, quilt, and bind using your favorite methods and the navy texture binding strips to complete the runner. Make 3 2. Stitch a flag E square to each end of the remaining B units to make (4) pieced strips. Press seams toward the B units. Sew a pieced strip to opposite sides of each red star block to make (2) 9½" x 14" red star sections. Press seams toward the pieced strips. Exploded Runner Diagram Make 2 www.quiltingtreasures.com 6 Patriotic Pop Set PLACEMATS FABRIC REQUIREMENTS Design: 22750 N 22754 Z 22751 N 22755 N 22752 B 22755 R 22751 B PLACEMATS 22750 N ⅓ 22751 N ½ 22752 B ⅜ 22754 Z ⅝ 22755 N 1 22755 R ½ 22751 B (Backing only) 1½ Navy Star Blocks Note: Use a ¼" seam allowance for all stitching. Cutting Directions WOF = Width of fabric from selvedge to selvedge. Label all pieces with the letters given in the cutting list. These letters are used to identify the pieces throughout the instructions. 1. Refer to steps 1 and 2 (page 2) of the Navy Star Blocks section for the Wall Quilt to make (8) B units and (8) D units. Use red H rectangles and white I squares to make (8) H units. Set H units aside for Placemat assembly. 22750 N: Ribbon/Star Print •Cut (1) 6½" x WOF strip; recut into (4) 6½" A squares 22751 N: Flag Print • Cut (2) 3½" x WOF strips; recut into (16) 3½" E squares • Cut (1) 3⅞" x WOF strip; recut into (8) 3⅞" squares, then cut in half diagonally to make 16 J triangles Make 8 Make 8 Make 8 2. Refer to steps 3, 4, and 5 (page 2) to make (4) 12½" x 12½" navy star blocks. 22752 B: Blue Paisley Print • Cut (2) 3½" x WOF strips; recut into (8) 3½" x 6½" D rectangles 22754 Z: White Dot • Cut (3) 3½" x WOF strips; recut into (8) 3½" x 6½" B rectangles and (16) 3½" I squares • Cut (1) 3⅞" x WOF strip; recut into (8) 3⅞" squares, then cut in half diagonally to make (16) K triangles 22755 N: Navy Texture • Cut (3) 3½" x WOF strips; recut into (32) 3½" C squares • Cut (8) 2¼" x WOF strips for binding Make 4 22755 R: Red Texture • Cut (2) 3½" x WOF strips; recut into (8) 3½" x 6½" H rectangles • Cut (4) 1½" x WOF strips; recut into (8) 1½" x 18½" border strips 22751 B: Flag Print (Backing Only) • Cut (2) 24" x WOF strips; recut into (4) 20" x 24" backing pieces www.quiltingtreasures.com Yards 7 Patriotic Pop Set Placemat Assembly Note: Refer to the exploded placemat diagram (below) throughout the following steps. 1. Sew a J triangle to a K triangle on the long diagonal edges to make a JK unit. Press seam toward the J triangle. Repeat to make (16) JK units total. Make 16 2. Sew a JK unit to each end of the H units to make (8) pieced strips. Press seams toward the JK units. Sew a pieced strip to opposite sides of each navy star block to make (4) 12½" x 18½" placemat centers. Press seams toward the navy star blocks. 3. Sew a 1½" x 18½" red texture border strip to the long sides of each placemat center to complete the tops. Press seams toward the border strips. 4. Layer, quilt, and bind using your favorite methods and the flag print backing pieces and the navy texture binding strips to complete the placemats. Exploded Placemat Diagram While all possible care has been taken to ensure the accuracy of this pattern, we are not responsible for printing errors or the way in which individual work varies. www.quiltingtreasures.com 8 Not For Resale/Winter 2013

© Copyright 2019