Decorative Jacket NCS S 1560-R90B NCS S 7005-R80B

NCS S 1560-R90B
NCS S 7005-R80B
Decorative
Jacket
Sew this decorative jacket with wonderful details
along the neckline, front and pockets. Use Burda
pattern 7634 as a basic pattern. We used View B
and made a few changes in the pattern. Follow the
step-by-step instructions below.
Sewing supplies
Smarter by PFAFF® C1100 Pro Sewing Machine
Robison Anton 40 wt. Rayon Embroidery Thread
Sewing thread to match your fabric
Inspira™ Twin needle 1.6mm size 80, 6200737-96
Inspira™ Tear Away Stabilizer
Smarter by Pfaff™ Accessories
Piping Foot 820532-096
Fabric and notions:
Light-colored linen for the jacket (see pattern)
Turquoise Thai-silk for the neckline 4" (10cm).
Embroidered silk for front, 4" (10cm).
Satin for the welt piping, 19.5" (50cm).
Cotton cord; 3mm diameter to use for piping,
long enough for neck, front and sleeves.
For more information regarding accessories please
visit www.smarterbypfaff.com.
SMARTER BY PFAFF® C1100 Pro Decorative Jacket
1
m)
•
Cut
Trace the pattern in your size and cut.
•
Alter the front and back pieces:
• Measure from the neckline on the front
piece 11/2" (4cm) and 1 1/4" (3 cm) at the
shoulder line.
•
Draw a smooth line so the marking matches.
Trace the new pattern pieces. Cut.
•
Trace the center front of the front piece and
measure 1 1/4" (3cm) wide pattern piece.
•
Draw a new pattern piece, same as the grey
marked area of the sleeve below
•
Measure 4" x 1"( 10x 2 cm) for the pocket flap
1 piece.
to create illu
a pattern
1½” (4cm)
1½” (4cm)
3/4” (2cm)
illu 2
•
Iron fusible interfacing to the wrong side of
the front pieces, neck, sleeve, pocket and
front edges.
Assembly instructions
1. Press the twin needle button on your sewing
machine and change to the Inspira twin needle
1.6mm size 80.
2.Thread your sewing machine with embroidery
thread in two matching colors on top and
illu 2bobbin thread in the bobbin.
illu 3
3.Test sew different stitches on a scrap piece.
Use the Inspira Tear-A-way stabiliser and
use the DFS™ (Dual Feed System) on your
Smarter by PFAFF® C1100 Pro sewing
machine. We have used stitch B 66 and
combined that with a straight stitch. Once you
have decided what stitch to use, decorate the
and
illu
3 pocket pieces
illu 2 neck, sleeve
illu 3to your liking.
1½” (4cm)
illu 4
3/4” (2cm)
illu 2
illu 5
illu 3
illu 6
illu 4
(3cm)
illu 5
Cut front edge in embroidered silk.
(3cm)
1 1/4”
(3cm)
1 1/4”
3/4” (2cm)
•
1 1/4”
(3cm)
(3cm)
1 1/4”
illu 1
1½” (4cm)
1 1/4”
(3cm)
1 1/4”
(3cm)
•
illu 1
Cut the fabric for your jacket base in white
linen according to the pattern.
Cut the lining
• Cut neck, sleeve and pocket edges in turquoise
Thai-silk.
Measure from the neckline on the back
piece 3/4" (2 cm) and 1 1/4" (3 cm) at the
shoulder line.
1 1/4”
m)
Preparation
4. Decorate the front edge with three lines of
twin needle straight stitches. Press.
1½” (4cm)
1½” (4cm)
5. Place the neck and front edge wrong sides
together and stitch a straight stitch at a 45
degree angle.
illu 4
illu 7
illu 5
illu 6
illu 6
1½” (4cm)
illu 8
illu 4
illu 7
illu 7
SMARTER BY PFAFF® C1100 Pro Decorative Jacket
2
(3cm)
1 1/4”
(3cm)
1 1/4”
1½” (4cm)
1 1/4”
(3cm)
6. Place the two neck/front edges right sides
3/4” (2cm)
together. Pin and stitch a straight stitch
at the
center back. Press.
1 1/4”
(3cm)
1½”
(4cm)
7.Measure along the
neck/front
edge, sleeve
edge and pocket edge for the piping. Cut satin
illuon53/4
illu 1fabrics
duchess
the” (2cm)
bias 2" wide(5cm) and
illu 6 illu 2
the length you measured, to cover the cotton
cord plus seam allowance. Cut cotton cord
same length as the bias.
illu 7
illu 3
21.Add piping on one of the long sides of the
4
pocket flap. Foldillu
the pocket
flap lengthwise
with the right
sides
together.
1½” (4cm)
22.Sew the short sides of the flap with a straight stitch.
illu 7
illu illu
4 8
illu 6
length 3.
illu 8
ill
1½” (4cm)
23.Turn the flap to have the right side out, Press.
illu 7 flap as desired, and stitch it in
Place the pocket
illu
9
illu 4place with at straight stitch.
illu 6
illu 10
illu 7
11.Stitch to cover the piping with the fabric.
©2010 KSIN Luxembourg II, S.ar.l. All rights reserved. SMARTER BY PFAFF and DFS™ are trademarks of KSIN Luxembourg II, S.ar.l.
illu 5illu 4
20.Trim the seam allowance of1½”
the(4cm)
piping at curves
and corners.
9. Place the fabric
and the piping under the groove
1½” (4cm)
of the foot, have the raw edges to the right.
illustraight
5 stitch and stitch
” (2cm)
10.Select center3/4
needle
illu 5
illu 3
illu 6 to the pattern.
19. Finish sewing your jacket according
Before attaching the sleeves sew the neck/front
edge to the jacket. Right sides together, pin and
stitch a straight stitch. Press.
1 1/4”
(3cm)
8. Use the Piping Foot 820532-096 to make the
trim. Wrap the bias fabric strip around the cord.
illu
illu 3
1½” (4cm)
illu 2
1 1/4”
(3cm)
illu 1
illu 2
12.Trim the seam allowance; leave ¼" (6mm).
illu 9illu
8 on the right side of the
13.Place the covered
piping
illu fabric
5 along the seam line. Place it under the
illu 6
Piping Foot.
illu 8
illu 7
illu 9
DESIGN
24.To make your jacket even more special stitch a
label. Program “Designed By” select a decorative
M
stitch and your name byPatricia
following the instructions
in your manual.
illu 10
25.Sew on a piece of fabric that matches your
decorations. Make sure you have fusible
interfacing on the label. Iron
the label and fold
DESIGN
BY
the illu
edges
under.
Attach
it
with
a decorative stitch
10
using a matching embroidery thread.
illu 8illu 9
DESIGN
14.Sew the piping to the neck/front edge along
the side that attaches to the front piece.
15.Sew the piping to the sleeve edge that attaches
to the sleeve piece.
16.Sew the piping to the top of the pocket.
17.Trim the seam allowance of the piping at curves
and corners.
illu 9 the decorated sleeve edge to the sleeve.
18.Sew
Place wrong sides together and pin. Stitch a
straight stitch. Press.
BY
Patricia
Patricia
BY
M
M
illu 10
Finished!
DESIGN
Patricia
BY
M
SMARTER BY PFAFF® C1100 Pro Decorative Jacket
3
`