FCS100 WHERE PRECISION DRIVES

WHERE
PRECISION
DRIVES
http://www.ipsystemsusa.com/Default.aspx
PRODUCTION
FCS100
STAINLESS STEEL SPRAY VALVE
VALVE SPECIFICATIONS
The FCS100 spray valve provides a repeatable, concentrated coating film in
pattern widths ranging from 0.25” to over 2”. The atomized spray process
resulting from the FCS100 will produce conical (round cap) or fan-shaped (flat
cap) patterns with transfer efficiencies in excess of 99%.
Dimensions:
147 mm x 22 mm x 22 mm
(5.80 in x 0.866 in x 0.866 in)
The FCS100 has many integrated features including:
Weight:
9 oz
Viscosity Range:
1 cps – Paste
Operating Air Pressure:
60 – 100 psi
Maximum Inlet Fluid Pressure:
2500 psi
Low pressure, low volume atomized process
300 series stainless steel fluid body for superior material compatibility
Interchangeable spray cap offers fan and oval-shaped patterns
Flow adjustment with lock nut
Divorced valve design prevents contamination of the air section
Compatible with all commercially available conformal coatings
Wide viscosity range offers versatility for virtually any spray
application
The FCS100 is available on all new PVA2000™, PVA650™, and PVA350™
selective coating systems, can be retrofitted to any existing PVA system, or can
be acquired for any manual spray application. For more information, please
contact a PVA sales representative at (518) 371-2684.
PVA also offers the following products to improve your dispensing application:
Wetted Components:
®
®
Stainless steel, Teflon , Kalrez
Transfer Efficiency:
99%
FCS300
Stainless steel spray valve with micrometer flow adjustment
FCS300-ES
Stainless steel extended spray valve
Spray Pattern Width (Round Cap):
0.25 in – 1 in
FC100-MC
Stainless steel front closing dispensing valve
Spray Pattern Width (Flat Cap):
0.75 in – 2 in+
FCS1-SP
FCS100 spare parts kit
V317
Flat spray cap
V318
Round spray cap
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Teflon® and Kalrez® are registered trademarks of Dupont.
FCS100 Mounting Dimensions
All dimensions provided in inches
WHERE
PRECISION
DRIVES
http://www.ipsystemsusa.com/Default.aspx
PRODUCTION
MV600
POSITIVE DISPLACEMENT DISPENSING VALVE
MV600 Shot Size Range:
0.10 cc to 1.45 cc
The MV600 is a true positive displacement metering valve capable of
dispensing deposits of viscous materials in a highly accurate process. The
desired deposit volume is determined by adjusting the micrometer stroke
adjustment and is not affected by variations in viscosity or material pressure.
The MV600 is compatible with all PVA automated platforms.
The MV600 has many integrated features including:
VALVE SPECIFICATIONS
Dimensions:
231mm x 38mm x 64mm
(9.10 in x 1.50 in x 2.53 in)
Viscosity Range:
50,000 cps – 5,000,000 cps
Operating Air Pressure:
60 – 100 psi
0.10 cc to 1.45 cc shot size
Rod displacement metering cylinder for long seal life
Reduced fluid volume inside valve for increased repeatability
High pressure inlet check valve for high viscosity fluids
Stainless steel fluid section for optimum material compatibility
Suck back dispense valve acts as outlet check to eliminate stringing
Micrometer adjustment permits shot size modification
Dual piston generates high pressure for faster dispense cycles
40:1 pressure advantage on metering cylinder
Optional limit sensors for “ready to dispense” and “dispense
complete” feedback
For more information on PVA’s dispensing capabilities, please contact one of
our sales representatives at (518) 371-2684.
PVA also offers the following products to improve your dispensing application:
Inlet Fluid Pressure:
100 – 2,500 psi
Maximum Generated Outlet Fluid Pressure:
4,000 psi
MV6-SP
MV600 spare parts kit
ST100
Benchtop pneumatic valve controller
PVA-5GPP
5-gallon pail pump delivery system
Wetted Components:
®
®
Stainless steel, Polyurethane, Kalrez , Teflon
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
PVA-55GDP
55-gallon drum pump delivery system
Teflon® and Kalrez® are registered trademarks of Dupont.
WHERE
PRECISION
DRIVES
PRODUCTION
SVX
SERVO CONTROLLED AUGER VALVE
VALVE SPECIFICATIONS
Dimensions:
167 mm x 72 mm x 56 mm
(6.5 in x 2.8 in x 2.2 in)
Weight:
12.8 oz (0.36 kg)
Viscosity Range:
25,000 cps – Paste
Encoder Resolution:
57,000 counts per revolution
The SVX auger valve is designed for processing micro volumes of material in
precise, repeatable patterns. The auger rotation is controlled by a brushless
servo motor with a programmable encoder providing 57,000 counts per
revolution for a highly controlled process.
The SVX is ideal for dispensing all medium to high viscosity pastes, epoxies,
and abrasive compounds in dot and bead patterns. The SVX can dispense
dots as small as 0.005” in diameter*.
The SVX has many integrated features including:
Fixed or floating dispense tip with footed needle
Virtually frictionless operation as auger and cartridge are constructed
of carbide
Quick release button releases pump from mounting bracket for quick
maintenance and storage
Selectable auger from shallow to deep cut design
Removable cartridge and auger for easy cleaning and storage
Software controlled dispense rate and shot size
For more information on PVA’s dispensing capabilities, please contact one of
our sales representatives at (518) 371-2684.
Minimum Shot Size*:
0.005” (0.13 mm) diameter
The SVX auger valve is suitable for integration onto all PVA robots, including:
Maximum Inlet Fluid Pressure:
100 psi
PVA3000
PVA850
PVA650SMT
PVA650
PVA350
PVA250
Auger Material:
Carbide
Valve Drive System:
Servo Motor
* Material dependent
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Automated dispensing system
Vision-based automated dispensing system
Vision-based automated dispensing system
Automated dispensing system
Benchtop dispensing system
Benchtop dispensing system
WHERE
PRECISION
DRIVES
http://www.ipsystemsusa.com/Default.aspx
PRODUCTION
FC100-MC
STAINLESS STEEL DISPENSING VALVE
VALVE SPECIFICATIONS
Dimensions
171.5 mm x 19 mm x 19 mm
(6.75" x 0.75" x 0.75")
The FC100-MC is a versatile dispensing valve for single-component
bead, dot, potting, or encapsulation projects. The FC100-MC features
a lightweight, compact design that makes it an ideal choice for any
automated or handheld process. Improving upon the traditional FC100
valve design, the FC100-MC features a micrometer flow adjustment
that makes fine tuning of your process easier than ever.
The FC100-MC is compatible with all PVA automated platforms.
Weight
7 oz
The FC100-MC has many integrated features including:
Viscosity Range
1 cps – Paste
Operating Air Pressure
60 – 100 psi
Maximum Inlet Fluid Pressure
3500 psi
Wetted Components
®
®
Stainless steel, Teflon , Kalrez
300 series stainless steel fluid body for superior material
compatibility
Micrometer flow adjustment with lock nut
Divorced valve design prevents material contamination of the
air section
Reversible valve seat
Spring-assisted valve closure for reliable cycle stops
Compatible with all Luer-Lok™ needle tip designs
High inlet pressure rating allows for processing of viscous
chemistries
For more information, please contact PVA at [email protected] or
1-518-371-2684.
PVA also offers the following products to improve your dispensing
application:
FC100
Stainless Steel Front Closing Dispensing Valve with
Standard Flow Adjustment
FC300
High Volume Stainless Steel Dispensing Valve
FC1-MC-SP
FC100-MC Spare Parts Kit
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Luer Lok™ is a Becton Dickinson and Co. trademark.
Teflon® and Kalrez® are registered trademarks of Dupont.
July 2010
FC100-MC Mounting Dimensions
43.2 mm
1.70"
(2x) #10-32 Thread
Air to Close
Air to Open
90.9 mm
3.58"
124.2 mm
4.89"
(2x) O 4.19 mm (0.165")
CLR Hole Thru
19.1 mm
(0.75") Square
14.4 mm
0.565"
33.0
mm
1.30"
www.pva.net
12.7 mm
0.50"
1/8 NPT
Fluid Inlet
WHERE
PRECISION
DRIVES
PRODUCTION
FC300
HIGH FLOW STAINLESS STEEL NEEDLE VALVE
VALVE SPECIFICATIONS
The FC300 is a versatile high flow dispensing valve for any single component
bead, dot, potting, or encapsulation project. Featuring a lightweight, compact
design, the FC300 is perfect for both automated and handheld processes in
which a high volume of material is dispensed.
Dimensions:
201 mm x 29.21 mm x 29.21 mm
(7.9 in x 1.15 in x 1.15 in)
The FC300 has many integrated features including:
Weight:
19 oz
Viscosity Range:
1 cps – Paste
Operating Air Pressure:
60 – 100 psi
Maximum Inlet Fluid Pressure:
3500 psi
Wetted Components:
®
Stainless steel, Viton, Teflon
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Divorced valve design prevents material contamination of the air
section
Stainless steel fluid body for superior material compatibility
1/4” NPT fluid port allows higher flow rates
Adjustable flow control
Spring-assisted valve closure for reliable cycle stops
Compatible with all Luer-Lok™ needle tips
The FC300 is available on all new PVA3000™, PVA650™, PVA350™, and
PVA250™ systems, or can be retrofitted to any existing PVA platform. For
more information on PVA’s dispensing capabilities, please contact one of our
sales representatives at (518) 371-2684.
PVA also offers the following products to improve your dispensing application:
FC3-SP
FC300 spare parts kit
FC100-MC
Stainless steel front closing needle valve
ST100
Digital valve controller
Teflon® and Kalrez® are registered trademarks of Dupont.
FC300 Mounting Dimensions
(2X) #10-32 Thread
Air to Close
6.7
7.9
Air to Open
5.41
(2X) Ø 0.170
Hole Thru
1.15” Square
0.75
1.47
1/4” NPT
Fluid Inlet
All dimensions provided in inches
WHERE
PRECISION
DRIVES
PRODUCTION
RC200
RADIAL COAT VALVE
VALVE SPECIFICATIONS
Dimensions
19 mm x 66 mm x 159 mm
(0.75" x 2.60" x 6.25")
Maximum Inlet Fluid Pressure
40 psi
The RC200 Radial Coat Valve sprays low viscosity fluids onto
the inside walls of a cylinder to create a layer of coating. It
integrates PVA’s front closing valve technology, to start and
stop fluid flow, with an air motor to spin the coating nozzle. The
nozzle rotation uses centrifugal force to accurately propel the
fluid directly on to the cylinder walls in a 360° degree pattern.
Spray Pattern
Horizontal, 360° coverage
Interchangeable coating nozzles allow a wide range of fluids to
be used in various size cylinders. A simple controlled motion in
the vertical axis can be performed to coat wider areas of a
cylinder.
Transfer Efficiency
99%
Fluids that can be sprayed with this technology include water,
solvents, and low viscosity lubricants.
Viscosity Range
1 cps – 1,000 cps
The RC200 has many integrated features including:
Operating Air Pressure
Valve:
80 psi
Air Motor: 40-100 psi
Weight
20 oz.
Wetted Components
®
®
Stainless Steel, Teflon , Kalrez
SAMPLE APPLICATONS
Apply a drug diluted in solvent to the inside of
a syringe
Apply a medical grade lubricant to the inside
of a syringe before the piston is assembled
Apply a solvent based conductive paint to the
inside of tubes
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
360° of coating coverage inside a cylinder
Fluid applied only to side walls of cylinder, not the bottom as
an atomizing spray head would
Greater fluid transfer efficiency using centrifugal force to
transfer coating without atomizing air
Vertical motion required to coat length of cylinders
Valves can be mounted on 0.75" centers for stacking multiple
heads per industry standard
Stainless Steel fluid body for superior material compatibility
Nozzles can be designed to meet specific applications:
Diameter of nozzle can be designed to fit different diameter
cylinders
Larger diameter nozzle can be used to increase amount of
centrifugal force
Length of nozzle can be designed to reach required depth
into cylinder
Nozzle orifice diameter can be designed to control coating
thickness relative to fluid viscosity
The RC200 is available for all new PVA machines, or can be
integrated into existing automation.
For more information on PVA’s dispensing capabilities, please
contact us at [email protected] or 1-518-371-2684.
Teflon® and Kalrez® are registered trademarks of Dupont.
July 2010
RC200 Multi-head Mounting Dimensions
19.05mm
(0.75")
66.04mm
(2.6")
www.pva.net
WHERE
PRECISION
DRIVES
http://www.ipsystemsusa.com/Default.aspx
PRODUCTION
MV300
POSITIVE DISPLACEMENT DISPENSING VALVE
MV300 Shot Size Range:
0.010 cc to 0.125 cc
The MV300 is a true positive displacement metering valve capable of
dispensing deposits of material in a highly accurate process. The deposit
volume is determined by the valve’s stroke adjustment setting and is not
affected by variations in viscosity or material pressure. The MV300 is
compatible with all PVA automated platforms.
The MV300 has many integrated features including:
VALVE SPECIFICATIONS
Dimensions:
203 mm x 29.2 mm x 29.2 mm
(7.99 in x 1.15 in x 1.15 in)
Weight:
8 oz
0.010 cc to 0.125 cc shot size
Divorced valve design prevents material contamination of the air
section
Inlet and outlet check valves provide precise metering of material
Adjustable stroke permits shot size modification
Stainless steel fluid section for optimum material compatibility
Lightweight aluminum air section
For more information on PVA’s dispensing capabilities, please contact one of
our sales representatives at (518) 371-2684.
Viscosity Range:
1 cps – Paste
Operating Air Pressure:
60 – 100 psi
Maximum Inlet Fluid Pressure:
300 psi
PVA also offers the following products to improve your dispensing application:
MV3-SP
MV300 spare parts kit
MV100
Positive displacement metering valve
MV200
Positive displacement metering valve
MV400
Positive displacement metering valve
Wetted Components:
®
®
Stainless steel, Delrin, Kalrez , Teflon
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Teflon® and Kalrez® are registered trademarks of Dupont.
MV300 Mounting Dimensions
All dimensions provided in inches
WHERE
PRECISION
DRIVES
PRODUCTION
FC100-CF
NON-ATOMIZED FILM COATING VALVE
VALVE SPECIFICATIONS
Dimensions
174 mm x 19 mm x 19 mm
(6.86" x 0.75" x 0.75")
The FC100-CF film coating valve produces a sharp, nonatomized stream of low viscosity fluids and coatings. The
resulting precise application process is ideal for solvent based
chemistries requiring wet film builds of at least 0.008”. The
FC100-CF is compatible with all PVA selective coating
platforms including the PVA350, PVA650, and PVA2000.
The FC100-CF has many integrated features including:
Weight
6 oz
Coating Process Speed
Up to 500 mm/sec (19.7 in/sec)
Pattern Width
8-12 mm
Viscosity Range
1 cps – 100 cps
Operating Air Pressure
60 – 100 psi
Maximum Inlet Fluid Pressure
3500 psi
Wetted Components
®
®
Stainless steel, Teflon , Kalrez
Non-atomized coating process with superior edge
definition
99% material transfer efficiency
Interchangeable film coat nozzles for variable flow rates
Micrometer flow adjustment with lock ring
Rapid coating speeds up to 500 mm (19.7") / second
Stainless steel fluid body for superior material
compatibility
Divorced valve design prevents material contamination
of the air body
For more information, please contact PVA at [email protected]
or 1-518-371-2684.
PVA also offers the following products to
enhance your dispensing application:
FC1-C-SP
FC100-CF Spare Parts Kit
FCS300-ES
Stainless Steel Extended Spray Valve
FC100-MC
Stainless Steel Front Closing
Dispense Valve
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Teflon® and Kalrez® are registered trademarks of Dupont.
July 2010
FC100-CF Mounting Dimensions
43.9 mm
1.73"
(2x) #10-32 Thread
Air to Close
Air to Open
90.9 mm
3.58"
130.3 mm
5.13"
(2x) O 4.19 mm (0.165")
CLR Hole Thru
19.1 mm (0.75")
Square
14.4 mm
0.565"
12.7 mm
0.50"
1/8 NPT
Fluid Inlet
39.4 mm
1.55"
www.pva.net
WHERE
PRECISION
DRIVES
http://www.ipsystemsusa.com/Default.aspx
PRODUCTION
CAM100
HANDHELD DIAPHRAGM DISPENSING VALVE
VALVE SPECIFICATIONS
Dimensions:
142.24 mm x 44.45 mm diameter
(5.60 in x 1.75 in diameter)
Weight:
3.7 oz
The CAM100 is an all plastic handheld valve suitable for dispensing low to
medium viscosity cyanoacrylate adhesives and anaerobic chemistries via a
unique “floating diaphragm” process. Fluctuating air and material pressure
above and below the diaphragm allows the disk to float while starting and
stopping the dispense cycle.
The valve’s ergonomic wand design makes handheld dispensing easier than
ever. The CAM100 can be utilized in applications requiring dots, beads,
encapsulation, or potting. The CAM100 should be utilized with the ST100 valve
controller.
The CAM100 has many integrated features including:
Viscosity Range:
1 cps – 20,000 cps
Operating Air Pressure:
60 – 100 psi
Patented silicone diaphragm disk with Teflon® film embedded on the
wetted side
Ergonomic wand construction for easy handheld dispensing
Delrin® material body
Compact design honored with the SMT Magazine Vision Award
For more information on PVA’s dispensing capabilities, please contact one of
our sales representatives at (518) 371-2684.
PVA also offers the following products to improve your dispensing application:
Maximum Inlet Fluid Pressure:
60 psi
Wetted Components:
®
®
Teflon , Delrin , Polypropylene
CAM1-SP
CAM100 spare parts kit
CA300
Diaphragm valve
PV106-01
CAM valve solvent stand
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Luer Lok™ is a Becton Dickinson and Co. trademark.
Teflon® and Delrin® are registered trademarks of Dupont.
CAM100 Operation and Dimensions
All dimensions provided in inches
WHERE
PRECISION
DRIVES
PRODUCTION
FCM100
NON-CONTACT MICRO DISPENSING VALVE
VALVE SPECIFICATIONS
Dimensions
152 mm x 19 mm x 19 mm
(6.00" x 0.75" x 0.75")
The FCM100 is ideal for any low viscosity underfill, encapsulant,
conformal coating, and micro dot or bead dispensing project. The
FCM100 “propels” precise shots of fluid onto a substrate resulting in
accurate patterns at a high robot speed as no in process z-axis
adjustments are required. The FCM100 is compatible with all PVA
automated platforms.
The FCM100 has many integrated features including:
Minimum Shot Size
0.83 µl
Minimum Line Width
0.25 mm (0.010")
Minimum Orifice Inside Diameter
0.08 mm (0.003")
Viscosity Range
1 cps – 20,000 cps
Operating Air Pressure
60 – 100 psi
Operating Fluid Pressure
1-100 psi
Wetted Components
®
®
Stainless steel, Teflon , Kalrez
Interchangeable 22, 25, 27, 28, 30, 32, and 33 gauge tip
designs for various dispensing profiles
Micrometer flow adjustment with lock ring
inMOTION™ dispensing with no z-axis motion needed
Highly repeatable dot size results in superior pattern definition
Dot and continuous line dispensing profile capability
Divorced valve design prevents material contamination of the
air body
For more information, please contact PVA at [email protected] or
1-518-371-2684.
The FCM100 micro dispensing valve is available in the following
configurations:
FCM100-22G
Non-contact Micro Dispensing Valve with 22g tip
FCM100-25G
Non-contact Micro Dispensing Valve with 25g tip
FCM100-27G
Non-contact Micro Dispensing Valve with 27g tip
FCM100-28G
Non-contact Micro Dispensing Valve with 28g tip
FCM100-30G
Non-contact Micro Dispensing Valve with 30g tip
FCM100-32G
Non-contact Micro Dispensing Valve with 32g tip
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
FCM100-33G
Non-contact Micro Dispensing Valve with 33g tip
Teflon® and Kalrez® are registered trademarks of Dupont.
July 2010
FCM100 Mounting Dimensions
43.2 mm
1.70"
90.9 mm
3.58"
116.8 mm
4.6"
(2x) O 4.19 mm (0.165")
CLR Hole Thru
14.4 mm
0.565"
19.1 mm
(0.75") Square
12.7 mm
0.50"
1/8 NPT
Fluid Inlet
www.pva.net
WHERE
PRECISION
DRIVES
PRODUCTION
PC300
HIGHVOLUMEMIXING VALVE
SYSTEMSPECIFICATIONS
Dimensions:
215.90 mm x 89.535 mm x 30.48 mm
(8.5 in x 3.525 in x 1.20 in)
The PC300 is ideal for any plural component bead, dot, potting, or
encapsulation project requiring high flow rates. The PC300 is ideal for any
handheld or automated meter-mix process. PVA will easily integrate the
PC300 with our programmable meter-mix solutions. The PC300 is
compatible with oversized bell inlet disposable static mixers.
The PC300 has many integrated features including:
1⁄4" NPT material inlet for high volume dispensing applications
Stainless steel fluid body for superior material compatibility
Divorced valve design prevents material contamination of the
air body
Weight:
42 oz
Separate material paths prevent mixing prior to leaving the
valve body
Viscosity Range:
1 cps - 1 Million
Reversible valve seat
Spring-assisted valve closure for reliable cycle stops
High pressure capability allows for consistent processing of
viscous materials
Operating Air Pressure:
50-100 PSI
For more information on PVA’s capabilities, please contact us
at [email protected]
Maximum Fluid Pressure:
600 PSI
Wetted Parts:
Stainless Steel, Viton, Teflon
®
One Mustang Drive
Cohoes, NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Teflon® is a registered trademark of DuPont.
8.5
(2X) ł 0.189 Thru
(Mounting Holes)
1.200
1.406
1.500
3.525
One Mustang Drive
Cohoes, NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Measurements shown in inches, scaled at 1:2.
WHERE
PRECISION
DRIVES
PRODUCTION
FCM200
NON-CONTACT MICRO DISPENSING VALVE
VALVE SPECIFICATIONS
Dimensions:
152 mm x 37 mm x 94 mm
(6.00" x 1.46" x 3.70")
Minimum Shot Size:
0.83 µl
Minimum Line Width:
0.25 mm (0.010 ")
Minimum Orifice Inside Diameter:
0.08 mm (0.003”)
Viscosity Range:
1 cps – 20,000 cps
Operating Air Pressure:
60 – 100 psi
The FCM200 Micro Dispensing Valve features reduced flow path
volume and enhanced actuation for cleaner line breaks. The
FCM200 is suitable for streaming lines or dispensing dots of low
to moderate viscosity underfill, encapsulants, conformal
coatings, and lubricants. The FCM200 can apply fluids at up to
8mm above the substrate to create a true “non-contact”
application. The FCM200 is compatible with all PVA automated
platforms.
The FCM200 has many integrated features including:
Interchangeable tip and nozzle retainer designs for
various dispensing profiles
Integrated self cleaning nozzle feature
On board syringe bracket with optional low level sensor
Optional valve heating for viscosity control
Micrometer flow adjustment with lock ring
Highly repeatable results with
superior pattern definition
Quiet, pulse-free operation
For more information, please
contact PVA at [email protected] or
1-518-371-2684.
Operating Fluid Pressure:
1-100 psi
Wetted Components:
®
®
Stainless steel, Teflon , Kalrez
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Teflon® and Kalrez® are registered trademarks of Dupont.
Sept. 2010
FCM200 Mounting Dimensions
3.7"
93.98mm
7.395"
187.83mm
5.76"
146.30mm
1.46"
37.08mm
www.pva.net
0.95"
24.13mm
WHERE
PRECISION
DRIVES
http://www.ipsystemsusa.com/Default.aspx
PRODUCTION
FC100
STAINLESS STEEL DISPENSING VALVE
VALVE SPECIFICATIONS
The FC100 is a versatile dispensing valve for single-component bead, dot,
potting, or encapsulation projects. The FC100 features a lightweight, compact
design that makes it an ideal choice for any automated or handheld process.
The FC100 is compatible with all PVA automated platforms.
Dimensions:
152 mm x 19 mm x 19 mm
(6.00 in x 0.75 in x 0.75 in)
The FC100 has many integrated features including:
Weight:
6 oz
Viscosity Range:
1 cps – Paste
Operating Air Pressure:
60 – 100 psi
Maximum Inlet Fluid Pressure:
3500 psi
Wetted Components:
®
®
Stainless steel, Teflon , Kalrez
1 One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
300 series stainless steel fluid body for superior material compatibility
Flow adjustment with lock nut
Divorced valve design prevents material contamination of the air
section
Reversible valve seat
Spring-assisted valve closure for reliable cycle stops
Compatible with all Luer-Lok™ needle tip designs
High inlet pressure rating allows for processing of viscous chemistries
For more information on PVA’s dispensing capabilities, please contact one of
our sales representatives at (518) 371-2684.
PVA also offers the following products to improve your dispensing application:
FC100-MC
Stainless steel front closing dispensing valve with micrometer flow adjustment
FC300
High volume stainless steel dispensing valve
FC1-SP
FC100 spare parts kit
Luer Lok™ is a Becton Dickinson and Co. trademark.
Teflon® and Kalrez® are registered trademarks of Dupont.
FC100 Mounting Dimensions
All dimensions provided in inches
WHERE
PRECISION
DRIVES
PRODUCTION
PCD200
DYNAMIC MIXING VALVE
PCD200 SPECIFICATIONS
Viscosity Range:
1 to 1,000,000 cps
Operating Air Pressure:
60 to 100 psi
Maximum Fluid Pressure:
750 psi
Wetted Parts:
300 Series Stainless Steel or Aluminum
Polyurethane Seals and Viton O-Rings
OR
All Teflon Seals
1:1 or Wide Ratio Ports
Ideal For Difficult to Mix Materials
and Wide Ratio Materials
Epoxies
Urethanes
Silicone Foam
Applications
Form in Place Gasketing
Potting
Encapsulation
Casting
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
The PCD200 is ideal for two component materials that are
difficult to mix or where space is limited and a long static mixer
cannot be used. The PCD200 is ideal for any hand held or
automated meter mix process. PVA will integrate the PCD200
with any of our programmable meter mix systems and work cell
platforms.
The PCD200 has many integrated features including:
Rugged air motor and gear box design for long life
Adjustable material suck back to prevent dripping
Choice of stainless steel or aluminum fluid body for
superior material compatibility
Two wetted seal choices for compatibility with virtually
any material
Divorced design prevents fluid from contaminating the
air body
Separate material paths prevent mixing prior to leaving
the valve body
High pressure capability allows processing of high
viscosity materials
9/16” SAE O-Ring inlet fittings for high volume material
flow and material hose angle adjustment
Variable outlet ports available to accommodate 1:1 or
wide ration materials.
For more information, please contact
us at [email protected]
Aug. 2011
WHERE
PRECISION
DRIVES
PRODUCTION
PC200
PLURAL COMPONENT MIXING VALVE
VALVE SPECIFICATIONS
The PC200 is ideal for any plural component bead, dot, potting, or
encapsulation project. The PC200 can be integrated with a PVA automated
meter-mix process or used in handheld dispensing operation. The PC200 is
compatible with oversized bell inlet disposable static mixers.
Dimensions:
165.10 mm x 63.5 mm
(6.5 in x 2.5 in)
The PC200 has many integrated features including:
Weight:
Aluminum
Stainless Steel
2.3 lbs (36.8 ounces)
3.7 lbs (59.2 ounces)
Viscosity Range:
1 cps – 100,000 cps
•
•
•
•
Stainless steel fluid body for superior material compatibility
Divorced valve design prevents material contamination of the air
body
Separate material paths prevent mixing prior to leaving the valve
body
High pressure capability for consistent processing of viscous
materials
For more information on PVA’s dispensing and meter-mix capabilities, please
contact one of our sales representatives at (518) 371-2684.
PVA also offers the following products to improve your dispensing application:
Operating Air Pressure:
30 – 100 psi
Maximum Fluid Pressure:
500 psi
PC200-AL
1:1 ratio manifold with aluminum fluid body and manifold
PC200-SS
1:1 ratio manifold with stainless fluid body and manifold
PC200-WR-AL
Wide ratio manifold with aluminum fluid body and manifold
PC200-WR-SS
Wide ratio manifold with stainless fluid body and manifold
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
WHERE
PRECISION
DRIVES
http://www.ipsystemsusa.com/Default.aspx
PRODUCTION
CAM200
HANDHELD DIAPHRAGM DISPENSING VALVE
VALVE SPECIFICATIONS
Dimensions:
163.83 mm x 55.88 mm
(6.45 in x 2.20 in)
Weight:
4.8 oz
The CAM200 is an all plastic handheld valve suitable for dispensing low to
medium viscosity cyanoacrylate adhesives and anaerobic chemistries via a
unique “floating diaphragm” process. Depressing the CAM200 finger switch
allows a diaphragm to flex and permits material to flow through the valve. The
diaphragm will terminate the dispensing process as the finger switch is
released.
The valve’s ergonomic wand design makes handheld dispensing easier than
ever. The CAM200 can be utilized in applications requiring dots, beads,
encapsulation, or potting.
The CAM200 has many integrated features including:
Viscosity Range:
1 cps – 20,000 cps
Maximum Inlet Fluid Pressure:
60 psi
Patented silicone diaphragm disk with Teflon® film embedded on the
wetted side
Ergonomic wand construction for easy handheld dispensing
Delrin® material body
Compact design honored with the SMT Magazine Vision Award
For more information on PVA’s dispensing capabilities, please contact one of
our sales representatives at (518) 371-2684.
PVA also offers the following products to improve your dispensing application:
Wetted Components:
®
®
Teflon , Delrin , Polypropylene
CAM2-SP
CAM200 spare parts kit
CA300
Diaphragm valve
PV106-01
CAM valve solvent stand
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Luer Lok™ is a Becton Dickinson and Co. trademark.
Teflon® and Delrin® are registered trademarks of Dupont.
CAM200 Operation and Dimensions
All dimensions provided in inches
WHERE
PRECISION
DRIVES
http://www.ipsystemsusa.com/Default.aspx
PRODUCTION
MV500
POSITIVE DISPLACEMENT DISPENSING VALVE
MV500 Shot Size Range:
0.10 cc to 1.45 cc
The MV500 is a true positive displacement metering valve capable of
dispensing deposits of material in a highly accurate process. The deposit
volume is determined by the metering cylinder’s stroke adjustment setting and
is not affected by variations in viscosity or material pressure. The MV500 is
compatible with all PVA automated platforms.
The MV500 has many integrated features including:
VALVE SPECIFICATIONS
Dimensions:
159 mm x 38 mm x 59 mm
(6.25 in x 1.50 in x 2.33 in)
Viscosity Range:
1 cps – Paste
Operating Air Pressure:
60 – 100 psi
Inlet Fluid Pressure:
50 – 350 psi
0.10 cc to 1.45 cc shot size
Reduced fluid volume inside valve for increased repeatability
Front closing dispense valve on outlet check for accurate shutoff
Stainless steel fluid section for optimum material compatibility
Adjustable dispense rate
Micrometer adjustment permits shot size modification
5:1 pressure advantage on metering cylinder
Optional limit sensors for “ready to dispense” and “dispense
complete” feedback
For more information on PVA’s dispensing capabilities, please contact one of
our sales representatives at (518) 371-2684.
PVA also offers the following products to improve your dispensing application:
MV5-SP
MV500 spare parts kit
ST100
Benchtop pneumatic valve controller
Maximum Generated Outlet Fluid Pressure:
500 psi
Wetted Components:
®
®
Stainless steel, Kalrez , Teflon
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
MV300
Positive displacement metering valve
MV600
Positive displacement metering valve
Teflon® and Kalrez® are registered trademarks of Dupont.
WHERE
PRECISION
DRIVES
PRODUCTION
FCS100-ES
STAINLESS STEEL EXTENDED SPRAY VALVE
VALVE SPECIFICATIONS
The FCS100-ES extended spray valve provides a repeatable, concentrated
coating film in circular pattern widths ranging from 0.125” to 0.5”. The atomized
spray process resulting from the FCS100-ES will produce excellent edge
definition and coating transfer efficiencies in excess of 99%.
Dimensions:
170 mm x 22 mm x 22 mm
(6.70 in x 0.866 in x 0.866 in)
The FCS100-ES has many integrated features including:
Weight:
9 oz
Viscosity Range:
1 cps – Paste
Operating Air Pressure:
60 – 100 psi
Low pressure, low volume atomized process
300 series stainless steel fluid body for superior material compatibility
Flow adjustment with lock nut
Divorced valve design prevents material contamination of the air
section
Compatible with all commercially available conformal coatings
Wide viscosity range offers versatility for virtually any spray
application
The FCS100-ES is available on all new PVA2000™, PVA650™, and PVA350™
selective coating systems, or can be retrofitted to any existing PVA system. For
more information on PVA’s coating capabilities, please contact one of our sales
representatives at (518) 371-2684.
PVA also offers the following products to improve your dispensing application:
Maximum Inlet Fluid Pressure:
2500 psi
Wetted Components:
®
®
Stainless steel, Teflon , Kalrez
Transfer Efficiency:
99%
FCS300-ES
Stainless steel extended spray valve with micrometer flow adjust
FCS300-F/R
Stainless steel spray valve with fan or circular-shaped pattern
FC100-MC
Stainless steel front closing dispensing valve
FCS1-ES-SP
FCS100-ES spare parts kit
Spray Pattern Width:
0.125 in – 0.5 in
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Teflon® and Kalrez® are registered trademarks of Dupont.
FCS100-ES Mounting Dimensions
All dimensions provided in inches
WHERE
PRECISION
DRIVES
http://www.ipsystemsusa.com/Default.aspx
PRODUCTION
MV400
POSITIVE DISPLACEMENT DISPENSING VALVE
MV400 Shot Size Range:
0.15 cc to 3.0 cc
The MV400 is a true positive displacement metering valve capable of
dispensing deposits of material in a highly accurate process. The deposit
volume is determined by the metering cylinder’s stroke adjustment setting and
is not affected by variations in viscosity or material pressure. The MV400 is
compatible with all PVA automated platforms.
The MV400 has many integrated features including:
VALVE SPECIFICATIONS
Dimensions:
229.11 mm x 121.16 mm x 41.4 mm
(9.02 in x 4.77 in x 1.63 in)
0.15 cc to 3.0 cc shot size
Divorced valve design prevents material contamination of the air
section
Inlet and outlet check valves provide precise metering of material
Adjustable dispense rate
Adjustable stroke permits shot size modification
Stainless steel fluid section for optimum material compatibility
Custom metering cylinders available for larger shot sizes
Weight:
3 lbs
For more information on PVA’s dispensing capabilities, please contact one of
our sales representatives at (518) 371-2684.
Viscosity Range:
1 cps – Paste
PVA also offers the following products to improve your dispensing application:
MV4-SP
MV400 spare parts kit
Operating Air Pressure:
80 – 100 psi
Maximum Inlet Fluid Pressure:
350 psi
MV100
Positive displacement metering valve
MV200
Positive displacement metering valve
MV300
Positive displacement metering valve
Wetted Components:
®
®
Stainless steel, Polyethylene, Kalrez , Teflon
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Teflon® and Kalrez® are registered trademarks of Dupont.
MV400 Mounting Dimensions
All dimensions provided in inches
WHERE
PRECISION
DRIVES
http://www.ipsystemsusa.com/Default.aspx
PRODUCTION
CA300
DIAPHRAGM DISPENSING VALVE
VALVE SPECIFICATIONS
Dimensions:
128 mm x 29.21 mm x 29.21 mm
(5.04 in x 1.15 in x 1.15 in)
Weight:
8 oz
The CA300 is a plastic dispensing valve suitable for applying cyanoacrylate
adhesives and anaerobic chemistries. This versatile diaphragm dispense valve
can be used for single component bead, dot, potting, or encapsulation projects.
The dual acting air cylinder and unique rigid diaphragm allow this valve to act
as a front closing valve making it more desirable for accurate placement of
small dots and fine bead patterns.
The lightweight and compact design makes it suitable for any automated,
stationary, or handheld application.
The CA300 has many integrated features including:
Viscosity Range:
1 cps – Paste
Operating Air Pressure:
60 – 100 psi
Delrin® material body
Adjustable flow control with locking set screw
Divorced valve design prevents material contamination of the air
section
Spring assisted valve closure for reliable cycle stops
Compatible with all Luer-Lok™ needle tip designs
For more information on PVA’s dispensing capabilities, please contact one of
our sales representatives at (518) 371-2684.
PVA also offers the following products to improve your dispensing application:
Maximum Inlet Fluid Pressure:
100 psi
Wetted Components:
®
®
Teflon , Delrin , Polypropylene
CA3-SP
CA300 spare parts kit
CAM100
Handheld diaphragm dispensing valve
PV105-V
Flexible valve stand
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Luer Lok™ is a Becton Dickinson and Co. trademark.
Teflon® and Delrin® are registered trademarks of Dupont.
CA300 Mounting Dimensions
All dimensions provided in inches
WHERE
PRECISION
DRIVES
PRODUCTION
SD5000
SERVO-CONTROLLED SYRINGE PUMP
SD5000 SPECIFICATIONS
Flow Rate:
0.0015cc/sec to 1cc/sec
Viscosity Range:
1 to 75,000 cps
Repeatability:
+/- 5% (<0.002cc/sec)
+/-2% (>0.020cc/sec)
The SD5000 is a fully programmable servo driven system
designed for precise metering of single component materials
such as anaerobics, cyanoacrylates, urethanes, epoxies, and
silicones. The system is typically used for applications requiring
minimal flow rates for low to medium viscosity materials.
The SD5000 comes complete with:
1cc or 10cc syringe metering chamber
Variable flow control via servo motor speed
Disposable metering cylinder eliminates costly
maintenance procedures
Automatic chamber refill system for both filled and
unfilled materials
Light, compact design permits mounting directly to
robot gantry eliminating variables such as material
compressibility and/or line swell
For more information, please contact us at [email protected]
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Aug. 2011
WHERE
PRECISION
DRIVES
http://www.ipsystemsusa.com/Default.aspx
PRODUCTION
MV100
POSITIVE DISPLACEMENT DISPENSING VALVE
MV100 Shot Size Range:
0.0002 cc to 0.0022 cc
The MV100 is a true positive displacement metering valve capable of
dispensing small deposits of material in a highly accurate process. The deposit
volume is determined by the valve’s stroke adjustment setting and is not
affected by variations in viscosity or material pressure. The MV100 is
compatible with all PVA automated platforms.
The MV100 has many integrated features including:
VALVE SPECIFICATIONS
Dimensions:
152.4 mm x 44.5 mm x 19.05 mm
(6 in x 1.75 in x 0.75 in)
0.0002 cc to 0.0022 cc shot size
Divorced valve design prevents material contamination of the air
section
Inlet and outlet check valves provide precise metering of material
Adjustable stroke permits shot size modification
Stainless steel fluid section for optimum material compatibility
Lightweight aluminum air section
Volume reducing dispense tips available
Weight:
12 oz
For more information on PVA’s dispensing capabilities, please contact one of
our sales representatives at (518) 371-2684.
Viscosity Range:
1 cps – Paste
PVA also offers the following products to improve your dispensing application:
MV1-SP
MV100 spare parts kit
Operating Air Pressure:
60 – 100 psi
Maximum Inlet Fluid Pressure:
300 psi
MV200
Positive displacement metering valve
MV300
Positive displacement metering valve
MV400
Positive displacement metering valve
Wetted Components:
®
®
Stainless steel, Kalrez , Teflon
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Teflon® and Kalrez® are registered trademarks of Dupont.
MV100 Mounting Dimensions
All dimensions provided in inches
WHERE
PRECISION
DRIVES
PRODUCTION
FCS300-ES
STAINLESS STEEL EXTENDED SPRAY VALVE
VALVE SPECIFICATIONS
Dimensions
190.5 mm x 22 mm x 22 mm
(7.50 in x 0.866 in x 0.866 in)
Weight
9.5 oz
Viscosity Range
1 cps – Paste
Operating Air Pressure
60 – 100 psi
Maximum Inlet Fluid Pressure
2500 psi
Wetted Components
®
®
Stainless steel, Teflon , Kalrez
Transfer Efficiency
99%
Spray Pattern Width
0.125 in – 0.5 in
The FCS300-ES extended spray valve provides a repeatable,
concentrated coating film in circular pattern widths ranging from 0.125”
to 0.5”. The atomized spray process resulting from the FCS300-ES
will produce excellent edge definition and coating transfer efficiencies
in excess of 99%. The FCS300-ES features a micrometer flow
adjustment that makes fine tuning of your process easier than ever.
The FCS300-ES has many integrated features including:
Low pressure, low volume atomized process
300 series stainless steel fluid body for superior material
compatibility
Micrometer flow adjustment with lock nut
Divorced valve design prevents material contamination of the
air section
Compatible with all commercially available conformal
coatings
Wide viscosity range offers versatility for virtually any spray
application
The FCS300-ES is available on all new PVA2000™, PVA650™, and
PVA350™ selective coating systems, or can be retrofitted to any
existing PVA system.
For more information, please contact PVA at [email protected] or
1-518-371-2684.
PVA also offers the following products to improve
your dispensing application:
FCS300-F/R
Stainless steel spray valve with fan or
circular-shaped pattern
FC100-MC
Stainless steel front closing
dispensing valve
FCS3-ES-SP
FCS300-ES spare parts kit
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Teflon® and Kalrez® are registered trademarks of Dupont.
July 2010
FCS300-ES Mounting Dimensions
(3x) #10-32 Thread
Air to Close
144.8 mm
5.7"
188.0 mm
7.4"
Air to Open
101.3 mm
3.99"
(2x) O 4.19 mm (0.165")
CLR Hole Thru
22 mm (0.866")
Square
12.7 mm
0.50"
24.6 mm
0.97"
43.7 mm
1.72"
25.4
mm
1.0"
10.8 mm
0.425"
www.pva.net
Atomizing Air
WHERE
PRECISION
DRIVES
http://www.ipsystemsusa.com/Default.aspx
PRODUCTION
MV200
POSITIVE DISPLACEMENT DISPENSING VALVE
MV200 Shot Size Range:
0.0015 cc to 0.0120 cc
The MV200 is a true positive displacement metering valve capable of
dispensing small deposits of material in a highly accurate process. The deposit
volume is determined by the valve’s stroke adjustment setting and is not
affected by variations in viscosity or material pressure. The MV200 is
compatible with all PVA automated platforms.
The MV200 has many integrated features including:
VALVE SPECIFICATIONS
Dimensions:
160 mm x 19 mm x 19 mm
(6.30 in x 0.75 in x 0.75 in)
0.0015 cc to 0.0120 cc shot size
Divorced valve design prevents material contamination of the air
section
Inlet and outlet check valves provide precise metering of material
Adjustable stroke permits shot size modification
Stainless steel fluid section for optimum material compatibility
Lightweight aluminum air section
Custom mounting holes and bleeder configurations available
Weight:
8 oz
For more information on PVA’s dispensing capabilities, please contact one of
our sales representatives at (518) 371-2684.
Viscosity Range:
1 cps – Paste
PVA also offers the following products to improve your dispensing application:
MV2-SP
MV200 spare parts kit
Operating Air Pressure:
60 – 100 psi
Maximum Inlet Fluid Pressure:
300 psi
MV100
Positive displacement metering valve
MV300
Positive displacement metering valve
MV400
Positive displacement metering valve
Wetted Components:
®
®
Stainless steel, Kalrez , Teflon (Delrin)
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Teflon® and Kalrez® are registered trademarks of Dupont.
MV200 Mounting Dimensions
All dimensions provided in inches
WHERE
PRECISION
DRIVES
http://www.ipsystemsusa.com/Default.aspx
PRODUCTION
FCS300
STAINLESS STEEL SPRAY VALVE
VALVE SPECIFICATIONS
Dimensions
168.4 mm x 22 mm x 22 mm
(6.63 in x 0.866 in x 0.866 in)
The FCS300 spray valve provides a repeatable, concentrated coating
film in pattern widths ranging from 0.25” to over 2”. The atomized
spray process resulting from the FCS300 will produce conical (round
cap) or fan-shaped (flat cap) patterns with transfer efficiencies in
excess of 99%. The FCS300 features a micrometer flow adjustment
that makes fine tuning of your process easier than ever.
The FCS300 has many integrated features including:
Weight
9 oz
Viscosity Range
1 cps – Paste
Operating Air Pressure
60 – 100 psi
Maximum Inlet Fluid Pressure
2500 psi
Wetted Components
®
®
Stainless steel, Teflon , Kalrez
Transfer Efficiency
99%
Spray Pattern Width (Round Cap)
0.25 in – 1 in
Spray Pattern Width (Flat Cap)
0.75 in – 2 in+
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Low pressure, low volume atomized process
300 series stainless steel fluid body for superior material
compatibility
Interchangeable spray cap offers fan and oval-shaped
patterns
Micrometer flow adjustment with lock nut
Divorced valve design prevents contamination of the air
section
Compatible with all commercially available conformal
coatings
Wide viscosity range offers versatility for virtually any spray
application
The FCS300 is available on all new PVA2000™, PVA650™, and
PVA350™ selective coating systems, can be retrofitted to any existing
PVA system, or can be acquired for any manual spray application.
For more information, please contact PVA at [email protected] or
1-518-371-2684.
PVA also offers the following products to improve your dispensing
application:
FCS300-ES
Stainless steel extended spray valve
FC100-MC
Stainless steel front closing dispensing valve
FCS3-SP
FCS300 spare parts kit
V317
Flat spray cap
V318
Round spray cap
Teflon® and Kalrez® are registered trademarks of Dupont.
July 2010
FCS300 Mounting Dimensions
43.2 mm
1.73"
(3x) #10-32 Thread
Air to Close
Air to Open
167.6 mm
6.6"
101.3 mm
3.99"
(2x) O 4.19 mm (0.165")
CLR Hole Thru
22 mm (0.866")
Square
24.6 mm
0.97"
22.5 mm
0.885"
www.pva.net
12.7 mm
0.50"
Atomizing Air
WHERE
PRECISION
DRIVES
PRODUCTION
FC300-C
STAINLESS STEEL / CARBIDE NEEDLE VALVE
VALVE SPECIFICATIONS
The FC300-C is a versatile high flow dispensing valve for any single component
bead, dot, potting, or encapsulation project. Featuring a lightweight, compact
design, the FC300-C is perfect for both automated and handheld processes in
which a high volume of material is dispensed.
Dimensions:
201 mm x 29.21 mm x 29.21 mm
(7.9 in x 1.15 in x 1.15 in)
The FC300-C has many integrated features including:
Weight:
19 oz
Viscosity Range:
1 cps – Paste
Operating Air Pressure:
60 – 100 psi
Divorced valve design prevents material contamination of the air
section
Carbide wetted parts for reliable processing of filled materials
Stainless steel fluid body for superior material compatibility
1/4” NPT fluid port allows higher flow rates
Adjustable flow control
Spring-assisted valve closure for reliable cycle stops
Compatible with all Luer-Lok™ needle tips
The FC300-C is available on all new PVA3000™, PVA650™, PVA350™, and
PVA250™ systems, or can be retrofitted to any existing PVA platform. For
more information on PVA’s dispensing capabilities, please contact one of our
sales representatives at (518) 371-2684.
PVA also offers the following products to improve your dispensing application:
Maximum Inlet Fluid Pressure:
3500 psi
Wetted Components:
®
Stainless steel, Viton, Carbide, Teflon
FC3-C-SP
FC300-C spare parts kit
FC300
High flow stainless steel front closing needle valve
FC100-MC
Stainless steel front closing needle valve
ST100
Digital valve controller
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Teflon® and Kalrez® are registered trademarks of Dupont.
FC300-C Mounting Dimensions
(2X) #10-32 Thread
Air to Close
6.7
7.9
Air to Open
5.41
(2X) Ø 0.170
Hole Thru
1.15” Square
0.75
1.47
1/4” NPT
Fluid Inlet
All dimensions provided in inches
WHERE
PRECISION
DRIVES
PRODUCTION
VPX100
Volumetric Pump
VALVE SPECIFICATIONS
Dimensions
40 mm x 40 mm x 275 mm
(1.57" x 1.57" x 10.8")
The VPX100 Volumetric Pump is a high precision, servo
controlled dispense valve based on a progressive cavity pump
principle. Internal seals provide for drip free shut off when
dispensing very low viscosity fluids. The design of the pump also
allows for shear free dispensing of fluids with abrasive fillers,
which can become damaged when dispensing using other
technologies.
The VPX100 is targeted for high accuracy applications such as:
• Underfill
Weight
14.8 oz (420g)
• Thermal Grease
Operating Temperature
10°C – 40°C
(50°F – 104°F)
• Dam & Fill
Flow Rate
.004 – 6.0 ml/min
Viscosity Range
1 cps – 100,000 cps
Maximum Inlet Fluid
Pressure
90 psi (6 bar)
Wetted Components
®
Stainless Steel, Delrin ,
®
Kalrez
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
• Epoxy Encapsulants
• Optical bonding
The VPX100 Volumetric Pump has many integrated features
including:
High precision +/- 1%
Luer Lok outlet connection
Self sealing = no drip of low viscosity fluids
Larger sizes available for higher flow rates
For more information, please contact PVA at [email protected] or
1-518-371-2684.
Nov. 2011
WHERE
PRECISION
DRIVES
PRODUCTION
FC100-C
NON-ATOMIZED FLOW COATING VALVE
VALVE SPECIFICATIONS
Dimensions:
173 mm x 19 mm
(6.82 in x 0.75 in)
Weight:
6 oz
Viscosity Range:
1 cps – 1000 cps
Operating Air Pressure:
60 – 100 psi
The FC100-C flow coating valve produces a sharp, non-atomized stream of low
viscosity fluids and coatings. The precise application process is ideal for
solvent-based chemistries requiring wet film builds of at least 0.010”.
The FC100-C has many integrated features including:
Non-atomized coating process with superior edge definition
Rapid coating speed up to 457 mm (18 in) / second
Divorced valve design prevents material contamination of the air
section
Stainless steel fluid body for superior material compatibility
Multi-port application head with interchangeable 19g to 27g tips
Adjustable flow control
The FC100-C is available on all new PVA2000™, PVA650™, and PVA350™
selective coating systems, or can be retrofitted to any existing PVA platform.
For more information on PVA’s coating capabilities, please contact one of our
sales representatives at (518) 371-2684.
PVA also offers the following products to improve your dispensing application:
FC1-C-SP
FC100-C spare parts kit
Maximum Inlet Fluid Pressure:
3500 psi
Wetted Components:
®
®
Stainless steel, Teflon , Kalrez
FCS300-ES
Stainless steel extended spray valve
FCM100
Non-contact micro dispensing valve
FC100-MC
Stainless steel front closing dispensing valve
Transfer Efficiency:
99%
Coating Speed:
Up to 457 mm (18 in) / sec
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Teflon® and Kalrez® are registered trademarks of Dupont.
FC100-C Mounting Dimensions
1.7
(2X) #10-32 Thread
Air to Close
Air to Open
3.58
(2X) Ø 0.165
Hole Thru
5.12
0.75” Square
0.57
0.50
1/8” NPT
Fluid Inlet
1.54
All dimensions provided in inches
WHERE
PRECISION
DRIVES
PRODUCTION
PT100
PINCH TUBE DISPENSING VALVE
SYSTEM SPECIFICATIONS
Dimensions:
98.04 mm x 34.93 mm x 71.12 mm
(3.86 in x 1.38 in x 2.80 in)
Weight:
9 oz
Viscosity Range:
1 cps - Paste
Operating Air Pressure:
60-100 PSI
Maximum Fluid Pressure:
150 PSI
Wetted Parts:
Urethane
The PT100 is a versatile dispensing valve for any single or
dual-component bead, dot, potting, or encapsulation project.
The PT100 is ideal for dispensing abrasive, or otherwise difficult to handle materials.
The PT100 has many integrated features including:
Simple pinch tube design offers superior material
compatibility
Adjustable flow control
Compatible with Luer-LokTM needle tip designs
Pneumatic piston motion compresses and relaxes tubing
Only wearable component is the disposable tubing
The PT100 is available for use in automated or handheld dispensing applications.
The following Spare Parts Kit is available for your dispensing
application:
PT100-SP PT100 Spare Parts Kit
For more information on PVA’s dispensing capabilities, please
contact us at [email protected]
One Mustang Drive
Cohoes, NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Luer-Lok is a Becton Dickinson and Co. trademark.
TM
Measurements shown in inches, scaled at 1:2.
One Mustang Drive
Cohoes, NY 12047
tel 1 518 371 2684
fx 1 518 371 2688
www.pva.net
WHERE
PRECISION
DRIVES
PRODUCTION
SV100 / SVC100
AUGER VALVE DISPENSING SYSTEM
SYSTEM SPECIFICATIONS
SV100 DISPENSE VALVE
Dimensions:
139.7 mm x 69.22 mm x 29.21 mm
(5.5 in x 2.73 in x 1.15 in)
Weight:
9 oz (0.26 kg)
Viscosity Range:
25,000 cps – Paste
Minimum Shot Size (Filled Materials):
0.020” (0.5 mm) Dots
Maximum Inlet Fluid Pressure:
100 psi
Auger Material:
Stainless Steel
Auger Motor:
24V DC Servo Motor
The SV100 is ideal for dispensing all medium to high viscosity pastes, epoxies,
and abrasive compounds in dot and bead patterns. The SV100 can dispense
dots as small as 0.020” in diameter. A dedicated servo controller, the SVC100,
permits customized valve settings for handheld or automated applications.
The SVC100 is a standalone controller utilized for operation of the SV100
valve. This highly functional control system permits programming of the motor
speed to the dispense valve, air pressure to the pre-packaged syringe, and a
variable auger reverse time for clean cycle stops. The SVC100 is equipped
with a foot pedal actuator for handheld processes.
The SV100 has many integrated features including:
The choice of an 8, 16, or 32 pitch stainless steel auger for custom
dispensing profiles
3, 5, 10, or 30 cc syringe barrel holder
Disposable feed tube connects syringe to the fluid body
Virtually zero dead space within the valve design
Field maintainable design
24V DC servo motor drive with optional encoder to provide
displacement feedback
Adjustable auger speed and reverse motion for clean cycle stops
9-pin serial port connection
SVC100 CONTROLLER
Dimensions:
241 mm x 168 mm x 70 mm
(9.5 in x 6.63 in x 2.75 in)
For more information on PVA’s dispensing capabilities, please contact one of
our sales representatives at (518) 371-2684.
Weight:
5 lbs (2.27 kg)
The SV100 auger valve is suitable for integration onto all PVA robots, including:
Power:
115/230V AC input voltage
24V DC internal voltage
Air:
100 psi (6.9 bar) maximum input
Repeat Accuracy:
0.5 ms (0.005 sec)
Certifications:
CE, RoHS
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
PVA3000
PVA850
PVA650SMT
PVA650
PVA350
PVA250
Automated dispensing system
Vision-based automated dispensing system
Vision-based automated dispensing system
Automated dispensing system
Benchtop dispensing system
Benchtop dispensing system
SV100 Mounting Dimensions
All dimensions provided in inches
WHERE
PRECISION
DRIVES
PRODUCTION
PC100
PLURALCOMPONENTMIXINGVALVE
SYSTEMSPECIFICATIONS
Dimensions:
167.64 mm x 68.58 mm x 22.23 mm
(6.60 in x 2.70 in 0.875 in)
The PC100 is ideal for any plural component bead, dot, potting, or
encapsulation project. The PC100 is perfect for any handheld or
automated meter-mix process. PVA will easily integrate the PC100 with
our programmable meter-mix solutions. The PC100 is compatible with
oversized bell inlet disposable static mixers.
The PC100 has many integrated features including:
Stainless steel fluid body for superior material compatibility
Divorced valve design prevents material contamination of the
air body
Weight:
22 oz
Separate material paths prevent mixing prior to leaving the
valve body
ViscosityRange:
1 cps - 100,000 cps
Reversible valve seat
OperatingAirPressure:
30-100 PSI
High pressure capability allows for consistent processing of
viscous materials
MaximumFluidPressure:
500 PSI
WettedParts:
Stainless Steel, Viton, Teflon®
One Mustang Drive
Cohoes, NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Spring-assisted valve closure for reliable cycle stops
For more information on PVA’s capabilities, please contact us
at [email protected]
PVA also offers the following products to improve your dispensing
application:
PC300
High volume plural component mixing valve
Teflon® is a registered trademark of DuPont.
6.6
Mounting Holes
ł 0.189
0.875
1.745
0.500
2.70
One Mustang Drive
Cohoes, NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Measurements shown in inches, scaled at 1:2.