www.redroosterfabrics.com by Gerri Robinson of Planted Seed Designs

by Gerri Robinson of Planted Seed Designs
www.redroosterfabrics.com
Quilt: appro
ximately 68
" x 68"
Quilt design and piecing by Gerri Robinson
Machine quilted by Deb Miner
Fabrics from the “Favorite Things” (Style #4417) by Gerri Robinson of Planted Seed Designs for Red Rooster Fabrics.
FABRIC REQUIREMENTS:
A. Pattern #24364 – BEI1............................... 2 yards
B. Pattern #24370 – LTBEI1........................13/8 yards
C.Pattern #24371 – DKBLU1.....................11/4 yards
D.Pattern #24365 – BLU1.............................. 1/2 yard
E.Pattern #24367 – DKBLU1,
#24368 – DKBLU1, #24369 – DKBLU1,
#24370 – DKBLU1.........................3/8 yard of each
F.Pattern #24364 – BRO1, #24366 – BLU1,
#24367 – BRO1, #24368 – MDBLU1,
#24369 – BLU1, #24371 – BRO1,
#24371 – MDBLU1, #24371 – LTBRO1
........................................................1/4 yard of each
Backing..........................................................43/8 yards
Batting........................................................... 76" x 76"
CUTTING INSTRUCTIONS:
Please read all instructions carefully before beginning. ¼”
seam allowance is included in measurements and all strips
are cut across the width of the fabric unless noted otherwise. Label pieces and keep together until ready to sew.
A.Pattern #24364 – BEI1 (large floral):
1. Cut (4) 71/2" x 72" (lengthwise) strips for
Outer Border..
2. Cut (3) 51/4" squares, then cut in half
diagonally twice to make (12) triangles.
B.Pattern #24370 – LTBEI1 (leaf dot):
1. Cut (36) 47/8" squares.
2. Cut (36) 41/2" squares.
C.Pattern #24371 – BLU (texture):
1. Cut (3) 51/4" squares, then cut in half
diagonally twice to make (12) triangles.
2. Cut (4) 47/8" squares.
3. Cut (4) 21/2" squares.
4. Cut (6) 11/2" strips for Inner Border. Sew strips
together end-to-end. Reserve for Inner Border.
5. Cut (8) 21/2" strips for binding.
D.Pattern #24365 – BLU1 (stripe):
1. Cut (12) 21/2" x 161/2" strips, fussy cut to center
the floral stripe.
E.Pattern #24367 – DKBLU1, #24368 – DKBLU1,
#24369 – DKBLU1, #24370 – DKBLU1:
1. Cut (8) 47/8" squares of each sku.
2. Cut (3) 51/4" squares of each sku, then cut in
half diagonally twice to make (12) triangles.
F. Pattern #24364 – BRO1, #24366 – BLU1,
#24367 – BRO1, #24368 – MDBLU1,
#24369 – BLU1, #24371 – BRO1,
#24371 – MDBLU1, #24371 – LTBRO1:
1. Cut (3) 51/4" squares of each sku, then cut in
half diagonally twice to make (12) triangles.
We take great care to ensure that the information included in our free pattern
is accurate and presented in good faith. No warranty is provided nor results
guaranteed. For your convenience, we post an up-to-date listing of corrections
on our website: http://www.redroosterfabrics.com/quilt/oops.php If a correction
is not noted, please contact our customer service department at [email protected] You may also call or write us at the address at right.
PIECING INSTRUCTIONS: Press in the direction of the arrows.
A. Hourglass Units:
1.From the (168) triangles, use only (144). Sew (1)
dark triangle to the left side of (1) light triangle to
make a pieced triangle unit. Make 2.
2.Stitch (2) pieced triangles together to make an
Figure 1 Make 36.
Hourglass unit (Figure 1). Repeat to make
41/2" x 41/2" unfinished.
(36) Hourglass units.
B. Half-Square-Triangle Units:
1.Draw a diagonal line on the wrong side of (36) 47/8" B squares
2.Place a marked B square, right sides together, on a 47/8" E square. Sew a 1/4" seam on
each side of the drawn line. Cut on the line, press seam open and trim "dog ears" (Figure
2). Repeat to make (72) Half-Square-Triangle units.
Draw.
Figure 2
Stitch and cut.
Press open.
Trim.
Make 72. 41/2" x 41/2" unfinished.
C. Block Construction:
1.Using Figure 3 as your guide, sew
the pieced units together. Block
should measure 161/2" square
(unfinished). Make 9.
QUILT ASSEMBLY:
Refer to the Quilt Diagram
and photo while assembling.
Figure 3 Make 9. 161/2" x 161/2" unfinished.
1.Sew (3) blocks, alternating with
(2) 21/2" x 161/2" D strips to make a block row. Make 3 block rows.
2.Sew (3) 21/2" x 161/2" D strips, alternating with (2) 21/2" C squares to make a sashing row.
Make 2 sashing rows.
3.Stitch the (3) blocks rows, alternating with the (2) sashing rows to complete the quilt center.
4.Inner Border:
a. Cut two lengths from the pieced 11/2" C strips equal to the length of quilt. Sew to
sides of quilt.
b. Cut two lengths from the remainder of the pieced 11/2" C strips equal to the width of
quilt. Sew to top and bottom of quilt.
5.Outer Border: Follow steps for the Inner Border to sew the 71/2" A strips to
the quilt.
A
FINISHING:
1.Prepare backing with a
horizontal seam to
measure 76" square. Press
seam open.
2.Layer quilt top, batting,
and backing. Baste layers
together.
3. Quilt as desired.
4.Trim layers even with
quilt top.
5.Join binding strips with
diagonal seams. Press
seams open. Attach
binding to quilt using
your favorite method.
6.Make a label and sew
to the back of the quilt.
C
A
Quilt Diagram
©2014 Gerri Robinson for Red Rooster Fabrics. All rights reserved. Not intended for individual resale. The design for this Red Rooster
Fabrics’ pattern is protected by U.S. copyright law. Quilt stores: for additional copies of this pattern please call or write
Red Rooster Fabrics at the address listed: 253 West 35th Street, 11th Floor, New York, NY 10001 • 401.728.4200
www.redroosterfabrics.com