instructions alpine cot bed

instructions
alpine cot bed
ALCB_0030_0411_V1
© Mamas & Papas (Holdings) Ltd. 2011
IMPORTANT: Please read instructions carefully
and keep for future reference
IMPORTANT: PLEASE READ
THESE INSTRUCTIONS
CAREFULLY BEFORE
STARTING TO ASSEMBLE
YOUR PRODUCT.
IMPORTANT: THE
ASSEMBLY OF THIS
PRODUCT REQUIRES
TWO PEOPLE.
ALPINE COT BED
Before assembling your product...
Do not discard any packaging until you are certain you have all the correct components and fittings.
If any items are damaged or missing, please contact your retailer or Mamas & Papas on +44 (0) 845 268
2000. Allow plenty of time and space when beginning the construction of your product.
COMPONENTS
2
1
3
4
1
Item Name
Part no.
Qty
Item Name
Part no.
Qty
1
Head/Foot end
00000---0000
2
4
00000---0000
1
2
Cot sides
3Base
00000---0000
2
00000---0000
1
Bed Side
FITTINGS
A
x8
57mm bolts
C
x4
D
x4
Side rail inserts
x4
Base brackets
G
x4
Dowels
63mm bolts
E
B
F
x4
18mm insert nuts
x1
Ball-ended allen key
IMPORTANT: The use of powered screwdrivers is not recommended for assembling this product.
-2-
STEP 1
2
Attach the cot sides
(2) to one of the head/
foot ends (1) using
two dowels (B), four
57mm bolts (A) and the
appropriate allen key
(G).
A
G
STEP 2
1
Secure the other head/
foot end (1) to the cot
sides (2) using two dowels
(B), four 57mm bolts (A)
and the appropriate allen
key (G).
2
A
G
-3-
STEP 3
Secure the head/foot ends
(1) to the cot sides (2)
using four 63mm bolts (C),
four side rail inserts (D)
and the appropriate allen
key (G). To tighten the
63mm bolts you will need
to use the ball shaped
end of the allen key at an
angle as shown.
STEP 4
NOTE: Please ensure
that the cross pattern of
the side rail insert (D) is
visible before attempting
to secure the head/foot
ends(1).
C
D
G
Insert the smooth ends of
the bed base brackets (E)
into the holes on the cot
sides (2).
IMPORTANT - The bottom
base position is the
safest. You should use this
position as soon as your
baby is old enough to sit
up.
E
-4-
STEP 5
3
Lower the bed base
(3) into the cot frame
ensuring that the bed
base brackets (E) align
with the holes in each
corner of the bed base.
Secure the bed base to
the cot frame using four
18mm insert nuts (F) and
the appropriate allen key
(G).
G
STEP 6
F
The cot is now fully
assembled. Check that
all of the fittings are fully
tightened before use.
Place the bed side rail in
a safe place as this is not
needed for the cot.
-5-
STEP 7
Converting the cot into a
day bed.
Disassemble the cot
removing all of the fittings.
Retrieve the bed side rail
from storage.
Place one of the cot sides
in a safe place as this will
not be needed for the day
bed.
STEP 8
2
Attach one of the cot
sides (2) and the bed side
rail to one of the head/foot
ends (1) using two dowels
(B), two 57mm bolts (A)
and the appropriate allen
key (G).
1
4
A
G
-6-
STEP 9
2
Attach the remaining
head/foot (1) end to
the cot side (2) and the
bed side rail (4) using
two dowels (B), two
57mm bolts (A) and the
appropriate allen key (G).
4
1
A
G
STEP 10
Secure the cot side (2) and
the bed side rail (4) to the
head/foot ends (1) using
four 63mm bolts (C) and
four side rail inserts (D).
To tighten the 63mm bolts
you will need to use the
ball shaped end of the
allen key (G) at an angle
as shown.
NOTE: Please ensure
that the cross pattern of
the side rail insert (D) is
visible before attempting
to secure the head/foot
ends(1).
D
C
G
-7-
STEP 11
Insert the four bed base
brackets (E) into the holes
in the side rails ensuring
that the threaded end
of the brackets are still
visible.
IMPORTANT - Use only
the bottom position when
in day bed form.
E
STEP 12
3
Lower the bed base (3)
onto the threaded ends of
the bed base brackets (E)
and secure using 4 18mm
insert nuts (F) and the
appropriate allen key (G).
G
F
-8-
STEP 13
The day bed is now fully
assembled. Check that
all of the fittings are fully
tightened before use.
Place the unused cot side
in a safe place as this is
not needed for the day
bed.
-9-
INSTRUCTIONS FOR SAFE USE & MAINTENANCE
• WARNING: Do no use this child’s bed if any part is broken, torn or missing.
• WARNING: Do not place this child’s bed near heat sources, windows and other furniture.
• The bottom position of the base is the safest. You should use the cot/bed in this position
as soon as your baby is old enough to sit up.
• Never leave anything in the cot/bed which could provide a foothold for your child to climb
out or would present a danger of suffocation or strangulation.
• All assembly fittings should be tightened properly and care should be taken to ensure
that no screws are loose, a child could trap parts of the body, or clothing (e.g. ribbons,
drawstrings, necklaces ) this could pose a risk of strangulation.
• Regularly check that all fittings and components of the cot/bed are fully tightened and in
working order. If any parts have become worn or damaged then do not use the cot/bed,
seek advice from your retailer or by calling our Customer Care Helpline on: +44 (0) 845 268
2000.
• Do not use replacement parts that are not recommended or supplied by Mamas & Papas.
Non-approved parts may render the repair or cot/bed unsafe.
• Do not place your cot/bed in the close proximity of an open fire and other sources of heat,
such as radiators, electric or gas fires.
• For reasons of safety we only recommend the use of the Mamas & Papas size 400
mattress for this cot/bed.
• The length and width shall be such that the gap between the mattress and the sides and
ends does not exceed 30mm.
• The thickness of the mattress chosen should be such that the internal height (the distance
between the surface of the mattress to the upper edge of the cot side) is a minimum of
500mm when the base is set in the lowest position and a minimum of 200mm when the cot
base is set in the highest position.
• The line engraved on the side of the cot indicates the maximum thickness of the mattress
to be used with the cot.
• Your cot/bed may be cleaned with a damp cloth. Never use bleach or harsh abrasives.
• This toddler bed should only be used when the child no longer needs the confinement of a
cot up to 4 years approximately.
• Children are likely to play, jump, bounce and climb on beds, therefore the child’s bed
should not be placed too close to other furniture or windows and should be placed either
tight to any wall or have a gap of 300mm between the wall and the side of the bed.
• To prevent injusry from falls do not use this cot once the child is able to climb out.
• The child’s bed conforms to BS8509:2008.
The maximum height (i.e. upper surface) of any mattress fitted must not exceed the line
engraved on the inside of the cot/bed leg/side. We recommend the use of the Mamas &
Papas size: 400 mattress.
Due to constant updating and improvements, some components may occasionally differ slightly from the diagrams shown in
these instructions. We reserve the right to change the specifications of any product without prior notice.
After sales Service: If you need assistance, spare parts or you are unhappy with any aspect of the goods please
contact Customer Services on: +44 (0) 845 268 2000, or e-mail us at: [email protected]
Visit our website at www.mamasandpapas.com for the latest product information.
-10-
NOTES
-11-
www.mamasandpapas.com
Mamas & Papas
Colne Bridge Road
Huddersfield, HD5 0RH
customer services helpline: +44 (0)845 268 2000
customer services email: [email protected]
-12-