After building prototypes and racing ... years, Odenthal Manufacturing Inc. began producing and

After building prototypes and racing them for two
years, Odenthal Manufacturing Inc. began producing and
marketing our one piece motor mounts for the Yamaha
KT100. At this point we had been seriously involved in kart
racing for over 16 years and could see a need for high quality, precision fit, kart racing components. From the beginning, our customers have been relying on our products to
help them win many local, regional, and national championships. All of our products are designed using state of the
art CAD software and optimized for maximum performance
and reliability. We never compromise when it comes to the
quality and workmanship we design into all of our products.
Ask anyone who has used them, and we are sure they will
agree, that Odenthal products really are the best that
money can buy!
odenthalmfg.com
MOTOR MOUNTS
Odenthal motor mounts are designed to exacting standards for proper
fit and performance. All of our motor mounts are CNC machined from
high-quality billet aluminum and anodized black. We have designed
our base plates to fit a range of chassis tubing diameters and spacing.
Mount clamps are now sold separately. They come in specific sizes to
fit individual karts exactly. See page 3 for ordering information.
THIRD BEARING STYLE MOTOR MOUNTS
YAM SERIES
Yamaha only motor mounts. KT100 Yamaha motor mount bolt
pattern is 70mm x 96mm. This mount is recommended for all Yamaha applications.
OD-YAM30
OD-YAM30B
Base plate for 28mm and 30mm frame rails. Upright and hardware
included.
Base plate only.
OD-YAM32
Base plate for 32mm frame rails. Upright and hardware included.
OD-YAM32B
Base plate only.
Page 1
FORMULA YAMAHA MOTOR MOUNTS
FYDD SERIES motor mounts have a dual bolt pattern. One that fits Yamaha
(70x96mm) and one that fits Parilla (80x128mm) and other motors with this bolt
pattern. This mount is specifically made for Formula Y applications but will also
work with any clutch style crankshaft. It utilizes a high speed bearing in the upright
to support the crankshaft on a special precision-ground driver (sold separately).
OD-FYDD32B
OD-FYDD30
OD-FYDD30B
OD-FYDD32
OD-FYDD32B
OD-FYDDT
OD-FYDDTB
OD-FYDDTB
Base plate for 28mm and 30mm frame rails. Upright and hardware included.
Base plate only.
Base plate for 32mm frame rails. Upright and hardware included.
Base plate only
Base plate for 32mm Tony Kart (125mm spacing). Upright and hardware included.
Base plate only.
ICA/TAG DIRECT-DRIVE MOTOR MOUNTS
PR SERIES direct-drive motor mounts have a dual bolt pattern for Parilla
( 80x128mm) and Rotax (80x102mm) motors. PR mounts will also fit CRG, K71,
Comer, HPV, PCR, and many others. Ask your dealer about other applications.
NOTE: To mount motors with a factory vibration plate (Parilla Leopard, BM Jaguar,
and Iami Puma), please ask for OD-BLTPKP with the mount. This bolt pack has
longer hardware necessary for mounting these motors.
OD-PRDD
OD-PRMAX
OD-PRDD
5 degree base plate for 28mm, 30mm, and 32mm frame rails.
OD-PRMAX
10 degree base plate for 28mm, 30mm, and 32mm frame rails. This mount is recommended for Rotax Max.
Page 2
SHIFTER KART MOTOR MOUNTS
OD-HON125 Our first shifter-kart mount fits the Honda CR125. This mount is CNCmachined from 2024 aircraft grade aluminum and designed to be lightweight without
compromising strength (3 Lbs. Complete). Clamps sold separately. More shifter
mounts coming soon.
Our unique rear mounting
bar reduces excess weight
and is made from 7075-T6
OD-HON125
MOTOR MOUNT CLAMPS
Odenthal motor mount clamps are sold separately to limit part numbers and confusion. To determine what size clamp a particular kart needs, please measure with a
caliper using this procedure: First, measure frame rail diameter, then measure total
distance outside to outside where the motor will go and subtract the rail diameter
from this number. (Example: 122—30=92mm center to center). Clamps are priced individually. Order two per motor mount.
International spacing is
92mm center to center.
OD-I28
OD-I30
OD-I32
For 28mm frame rails.
For 30mm frame rails.
For 32mm frame rails.
Kali spacing is
90mm center to center.
OD-K28
OD-K30
OD-K32
For 28mm frame rails.
For 30mm frame rails.
For 32mm frame rails.
Page 3
Clamps for American spacing,
Topkart cadets, and Tony Karts.
OD-AT28
OD-AM28
OD-T32
For Topkart Cadet.
For American spacing 2 7/8” ctc
For Tony Kart 125mm ctc
SPARE PARTS AND HARDWARE
Part # OD-ENUP
Part # OD-ENBE
Extended nut style
upright with 15mm
precision high
speed bearing
15mm replacement bearing for
EN upright
Part # OD-ENSN
Snap ring for EN
upright
Part # OD-FYUP
Part # OD-FYBE
Formula Yamaha
upright with
20mm precision
high speed bearing
20mm replacement bearing for
FY upright
Part # OD-FY10T
Part # OD-FY11T
10 tooth FY driver
11 tooth FY driver
Part # ODBOLTPKP
Part # ODBOLTPKD
Bolt pack for Parilla Leopard, BM
Jaguar, and Iami
Puma
Bolt pack for direct-drive motor
mounts
Part # ODFYSN
Snap ring for FY
upright
Part # ODBOLTPK3
Botl pack for 3rd
bearing motor
mounts
Part # OD-SPKIT
Upright spacer kit
for wide clutches
Part # OD-SP1/4
1/4 inch upright
HARDENED BOLTS AND WASHERS
Part #
OD-10X30SH
OD-6X45SH
OD-8MHDW
OD-8X150SH
OD-8X20SH
OD-8X25FH
OD-8X30SH
OD-8X50SK
Description
Metric 10x30 socket head motor mount clamp bolt
Metric 6x45 socket head bolt for Honda motor mount
8mm hardened washer for upright and spacer kit
Metric 8x150 socket head bolt for Honda mount
Metric 8x20 socket head bolt for motor mounts
Metric 8x25 flat head bolt for motor mounts
Metric 8x30 socket head bolt for upright with safety wire holes
Metric 8x50 socket head bolt for spacer kit with safety wire holes
Page 4
Exac-Toe 2 is our new and improved racing kart alignment gauge. This precision unit is CNCmachined from 6061-T6 billet aluminum, anodized black, and features laser engraved graphics
for improved durability. It also has a built-in level. Exac-Toe 2 can be used to accurately set
toe and camber. We also have new accessories (spindle extenders and an extended bar) that
can be used with any Exac-Toe to check dynamic alignment with the chassis loaded.
OD-ET2R
Exac-Toe 2 alignment system with 36” bar.
OD-ETSPIN1
OD-ETSPIN2
OD-ETSPIN3
OD-ET2X
14mm threaded spindle extenders (pair) for
European spindles.
16mm threaded spindle extenders (pair) for
Margay Brava (Sold through Margay Products)
5/8” threaded spindle extenders (pair) for
American spindles
OD-ET2XS1
Exac-toe 2 with Xbar and pair of 14mm
spindle extenders.
OD-ET2XS2
Exac-toe 2 with Xbar and pair of 16mm
spindle extenders.*Sold through Margay Products.
OD-ET2XS3
Exac-toe 2 with Xbar and pair of 5/8”
spindle extenders.
OD-ETBOX
Exac-Toe 2 alignment system with 57” Xbar.
OD-ET2
Exac-Toe 2 alignment
gauges only (pair)
OD-ETXBAR
Extended Exac-toe bar. 57”
OD-ETXKIT1
Xbar and pair of 14mm spindle extend-
OD-ETXKIT2
Xbar and pair of 16mm spindle extenders.
OD-ETXKIT3
Xbar and pair of 5/8-16 spindle extend-
OD-ETBAR
Regular bar for Exac-toe and Exac-toe 2.
36” long .5” diameter.
OD-ETCLA
Replacement clamp washer.
OD-ETLEV
Replacement level.
Replacement box with custom foam for the
original Exac-toe and Exac-toe 2.
Page 5
UNIVERSAL MOUNTING SYSTEM
Our Universal Mounting System can be configured to mount any number of items to any racing
kart. Exhaust pipes, air boxes, and add-on weight can be easily and properly attached using UMS
components. We offer kits for the most popular set-ups, and we also offer the components separately, allowing the customer to configure a system to fit their exact needs. Our UN20 clamp fits
16mm to 25mm tubes and our UNFR clamp fits 28mm to 32mm frame tubes . This covers most
of the sizes found on American and European made racing karts. All of our components are machined from 6061-T6 aluminum and anodized black to look sharp with all color schemes.
PART # OD-UN20
PART # OD-UNFR
PART # OD-UNLBR
Clamp for 16mm to 25mm
tubes.
Frame clamp for 28mm to
32mm tubes.
L-bracket for mounting
Air boxes, etc.
PART # OD-UN20SA
PART # OD-UNFRSA
PART # OD-UNSA
16mm to 25mm clamp with
short arm.
28mm to 32mm clamp and
short arm.
Short arm
74mm long
PART # OD-UN20MA
PART # OD-UNFRMA
PART # OD-UNMA
16mm to 25mm clamp with
medium arm
28mm to 32mm clamp with
medium arm
Medium arm
112mm long
PART # OD-UN20LA
PART # OD-UNFRLA
PART # OD-UNLA
16mm to 25mm clamp and
long arm
28mm to 32mm clamp and
long arm
Long arm
170mm long
PART # ODUNMAXKIT
Rotax pipe
mounting kit
PART # OD-UNSSKIT
Shifter kart silencer mounting kit
PART # OD-UN20MAC
PART # OD-UNABKIT
16mm to 25mm clamp,
medium arm, and pipe
mount cradle assembly
PART # OD-UNPMC
Pipe mount cradle assembly
Air box mounting kit
PART # OD-UNSP
Spring for pipe mount
PART # OD-UNGROM
Rubber grommet for
Cradle assemblies
PART # OD-OPENER
PART # OD-UNABC
Air box cradle assembly
Page 6
Billet aluminum bottle opener.
Lightweight, strong, handles
well.
Odenthal Manufacturing Incorporated
132 E. Hanley Ave. Dalton Gardens ID, 83815
Phone: 208-772-9763
To find a dealer near you or to request a copy of this catalog in
electronic form (PDF, requires Acrobat Reader) call or send an email to [email protected]
Business Hours:
Monday-Friday 8:00am to 5:00pm PST
Closed weekends and holidays
Odenthal Manufacturing is committed to becoming your primary source for
race kart components. It is difficult to keep up with all the new trends in kart
racing. We would appreciate any suggestions for new products that could
come into demand. Additionally, we welcome the opportunity to bid on CNC
machine work. We produce OEM equipment for several kart makers and would
like to expand this part of our business.
All of our machined parts are produced at our facility in Dalton Gardens,
Idaho. We employ local resources and American made products whenever
possible. We use state of the art CAD/CAM design software and highperformance CNC machines to manufacture our racing products.
Thank you for choosing Odenthal Manufacturing.
Made in the USA
RETAIL PRICE LIST FEBRUARY 2008
Mount clamps are now sold separately in order to limit part numbers and confusion. (The total
price stays the same.) Please specify what clamps you need with each mount and we will
put them in with the mount and mark the box. Or, keep a selection in stock to fit different
karts and the dealer can mark the box.
Third Bearing Style Motor Mounts
PART #
DESCRIPTION
YAM Series (Yamaha only. Machined from 6013 billet aluminum, annodized black)
This mount is recommended for all Yamaha applications.
OD-YAM30
Base for 28 and 30mm frame rails with upright
OD-YAM30B Base plate only
OD-YAM32
Base for 32mm frame rails with upright
OD-YAM32B Base plate only
RETAIL
$184.95
$139.95
$184.95
$139.95
!!YP- AND YT- SERIES MOUNTS ARE DISCONTINUED!!
Formula Y Series (fits Yamaha & Parilla Motors, 6061 billet aluminum, annodized black)
OD-FYDD30
Base for 28 and 30mm frame rails with upright
OD-FYDD30B Base plate only
OD-FYDD32
Base plate for 32mm frame rails with upright
OD-FYDD32B Base plate only
$159.95
$121.85
$159.95
$121.85
ICA/TAG Motor Mount Base Plates (6061 billet aluminum, anodized black)
PRDD Series (Fits Parilla Leopard, Rotax, CRG, K71, Comer, HPV, PCR, etc.
Note: To mount motors with a factory vibration plate (Parilla, Leopard, BM Jaguar,
and Iame Puma) please ask for OD-BLTPAKP with the mount.
OD-PRDD
5 degree base plate for 28, 30, and 32mm frame rails
OD-PRMAX
10 degree base plate for 28, 30, and 32mm frame rails.
$104.95
$119.95
Shifter Kart Motor Mounts (6013 billet aluminum, annodized black)
Hardware included. Mount clamps are sold separately.
OD-HON125
Motor mount for Honda CR125.
*125mm wide Tony Kart mounts and accessories will be discontinued when current
stock is exhausted.
$259.95
PART #
DESCRIPTION
RETAIL
Motor Mount Clamps (6061 billet aluminum, annodized black) Sold individually with a bolt. If unsure
what size a particular kart needs please measure with a caliper using this procedure: First,
measure frame rail diameter, then measure total distance outside to outside where the mount
will go and subtract the rail diameter from this number. (Example: 122-30=92mm c-t-c.)
International frame rail spacing 92mm center-to-center:
OD-I28
Clamp for 28mm frame rails
OD-I30
Clamp for 30mm frame rails
OD-I32
Clamp for 32mm frame rails
Kali Style frame rail spacing 90mm center-to-center:
OD-K28
Clamp for 28mm frame rails
OD-K30
Clamp for 30mm frame rails
OD-K32
Clamp for 32mm frame rails
Other clamp types:
OD-AM28
Clamp for American spacing 2&7/8 in, (c-t-c) 28mm rails
OD-AT28
Clamp for TopKart Cadet
$14.95
$14.95
$14.95
$14.95
$14.95
$14.95
$14.95
$14.95
Spare parts and hardware for motor mounts
OD-10X30SH
OD-6X45SH
OD-8MHDW
OD-8X150SH
OD-8X20SH
OD-8X25FH
OD-8X30SH
OD-8X50SK
OD-BOLTPK3
OD-BOLTPKD
OD-BOLTPKP
OD-ENBE
OD-ENSN
OD-ENUP
OD-FY10T
OD-FY11T
OD-FYBE
OD-FYSN
OD-FYUP
OD-SP1/4
OD-SPKIT
M10x30 Mount clamp bolt
M6X45 Bolt for Honda mount
8MM Hardened washer for upright and spacer kit
M8X150 Bolt for Honda mount
M8X20 Bolt for motor mounts
M8X25 Flathead bolt for motor mounts
M8X30 Bolt with holes for upright
M8X50 Bolt with holes for spacer kit
Bolt pack for 3rd bearing motor mounts
Bolt pack for Direct-drive motor mounts
Bolt pack for Parilla Leopard, BM Jaguar, Iami Puma
15MM Bearing for EN upright
Snap ring for EN upright
Complete Extended Nut style upright
10 Tooth FY driver
11 Tooth FY driver
20MM bearing for FY upright
Snap ring for FY upright
Complete Formula Yamaha upright
1/4 inch upright spacer
Upright spacer kit.
$2.00
$1.50
$0.75
$5.55
$1.50
$1.50
$1.50
$2.00
$8.50
$4.75
$4.75
$16.95
$2.25
$52.95
$16.50
$16.50
$19.95
$2.25
$54.95
$6.00
$20.95
PART #
DESCRIPTION
"Exactoe2" Alignment Gauge and Accessories
Exac-toe2 alignment gauge. Unit only, no bar.
OD-ET2
OD-ET2R
Exac-toe2 with regular 36" bar.
OD-ET2X
Exac-toe2 unit with new 57" XBAR.
OD-ET2XS1
Exac-toe2 unit with XBAR and pair of 14mm spindle extenders
OD-ET2XS2
Exac-toe2 unit with XBAR and pair of 16mm spindle extenders
OD-ET2XS3
Exac-toe2 unit with XBAR and pair of 5/8-16 spindle extenders
OD-ETBAR
Regular Exac-toe2 bar 36" long. .5" diameter.
OD-ETBOX
Box for Exac-toe2 with custom foam.
!NEW! OD-ETCAM
Exac-toe2 camber attachment (Packaged Seperately)
OD-ETCLA
Clamp washer for Exac-Toe2 unit
OD-ETLEV
Level for Exac-Toe2 unit
OD-ETSPIN1 Spindle extenders (pair). 14mm thread. For dynamic alignment.
OD-ETSPIN2 Spindle extenders (pair). 16mm thread. For dynamic alignment.
OD-ETSPIN3 Spindle extenders (pair). 5/8-16 thread. For dynamic alignment.
OD-ETXBAR Extended Exac-Toe2 bar. 57" (3-piece)
OD-ETXKIT1 Pair of 14mm spindle extenders and 57" bar.
OD-ETXKIT2 Pair of 16mm spindle extenders and 57" bar.
OD-ETXKIT3 Pair of 5/8-16 spindle extenders and 57" bar.
Flex-Light Universal Mounting System
Flexlight universal mounting hardware can be configured for exhaust pipes, air-boxes, weight, etc.
OD-UN20
Clamp for 16-25mm tubes
OD-UN20LA
16-25mm clamp and long arm
OD-UN20MA 16-25mm clamp and medium arm
OD-UN20MAC 16-25mm clamp, medium arm, and PM cradle assembly
OD-UN20SA
16-25mm clamp and short arm
OD-UNABC
Air-box cradle assembly
OD-UNABKIT FR clamp, short arm, LBR, and airbox cradle assembly
OD-UNFR
Frame clamp for 28-32mm tubes
OD-UNFRLA Frame clamp and long arm
OD-UNFRMA Frame clamp and medium arm
OD-UNFRSA Frame clamp and short arm
OD-UNGROM Rubber grommet for cradle assemblies
OD-UNLA
Long arm 170mm
OD-UNLBR
L-shaped bracket for airbox, etc. With bolt
OD-UNMA
Medium arm 112mm
!NEW! OD-UNMAXKIT 2 Frame clamps, 2 MAX90 Arms, 2 Short Arms, 2 rubber grom., and hardware
OD-UNMAX90 90 degree arm replacement for UNMAXKIT
OD-UNPMC
Pipe mount cradle assembly.
OD-UNSA
Short arm 74mm
OD-UNSP
Spring for pipe mount
OD-UNSSKIT Shifter silencer kit: FR, LA, LBR, and PMC
All prices are subject to change.
RETAIL
$179.95
$194.95
$216.95
$264.95
$264.95
$264.95
$24.95
$22.49
$149.95
$1.50
$5.45
$56.95
$56.95
$56.95
$54.95
$109.95
$109.95
$109.95
$17.95
$29.95
$28.95
$48.95
$27.95
$18.95
$54.95
$17.95
$29.95
$28.95
$27.95
$2.50
$12.95
$9.95
$11.95
$79.95
$15.95
$18.95
$10.95
$3.49
$57.95