DREDD (2012) Front-Left Vest Panel Front-Right Vest Panel Back Vest Panel

DREDD (2012)
Armored Vest Patterns
neck ro
Based off the movie-used
Judge Griffin Armor (background costume)
courtesy StudioCreations.com
neck roll stitch
(NOTE: some Judg
two straps in the bac
Adjust your patte
DREDD (2012)
Back Vest Pane
2014.04.26
shoulder stitch
1 inch
square
Courtesy StudioCreations.c
Cut along dotted line to exend the top vest area 3cm if the wea
1 inch
elastic
webbing
1 inch cotton webbing
2 inch webbing
sewing
Based on The
2 inch webbing
sewing
(Sew 2 inch webbing down
neck roll stitch
(NOTE: some Judge Vests only had
two straps in the back of the neck roll.
Adjust your pattern accordingly)
neck roll stitch
REDD (2012)
ck Vest Panel
4.04.26
ed on The
shoulder stitch
rtesy StudioCreations.com
est area 3cm if the wearers height is more than 6 feet 3 inches tall
1 inch cotton webbing
2 inch webbing
2 inch webbing
sewingsewing
ing
0.5 inch
Leather
Collar Strap
D
F
20
Ba
Co
Cut along dotted line to exend the top vest area 3cm if the we
1 inch
elastic
webbing
1 inch cotton webbing
2 inch webbing
sewing
DREDD (2012)
Front-Left Vest Panel
1 inch
elastic
webbing
1 inch
elastic
webbing
2014.04.26
Based on The
Courtesy StudioCreations.com
1 inch
cotton webbing
vest area 3cm if the wearers height is more than 6 feet 3 inches tall
webbing
1 inch
cotton
webbi
1 inch
elastic
webbing
0.5 inc
Leath
Collar Stra
DREDD (2012)
Front-Right Vest Panel
2014.04.26
Based on The
1 inch
cotton
webbing
Courtesy StudioCreations.com
Cut along dotted line to exend the top vest area 3cm if the wearers height is more than 6 feet 3 inches tall
1 inch cotton webbing
0.5 inch
Leather
Collar Strap
inches tall
2 inch webbing
sewing
2 inch webbing
sewing
(Sew 2 inch webbing down
after everything else is sewn,
but before armor panels
are attached)
<---- 29 inch long stri
1 inch cotton webbing
s
1
Cut along dotted line to exend the bottom vest patte
4 inch x 1.5 inch leather
(Sew 2 inch webbing down
after everything else is sewn,
but before armor panels
are attached)
2 inch webbing
sewing
2 inch webbing
sewing
<---- 27 inch long st
1.5 inch x 1.25 inch
leather panel
(sewn over leather
belt loop)
2 inch webbing
2 inch webbing
sewingsewing
(Sew 2 inch webbing d
after everything else is
but before armor pan
are attached)
-- 29 inch long strip of 2 inch wide webbing ---->
1 inch cotton webbing
1 inch cotton webbing
stitch area for
14 inch cotton
web loop
the bottom vest pattern 2cm if the wearers height is more than 6 feet 3 inches tall
inch x 1.5 inch leather panel (sewn over elastic straps)
---- 27 inch long strip of 2 inch wide webbing ---->
5 inch x 1.25 inch
leather panel
ewn over leather
belt loop)
1.5 inch x 1.25 inch
leather panel
(sewn over leather
belt loop)
(Sew 2 inch webbing down
after everything else is sewn,
but before armor panels
are attached)
2 inch webbing
2 inch webbing
sewing
sewing
ing
2 inch webbing
sewing
(Sew 2 inch webbing down
after everything else is sewn,
but before armor panels
are attached)
2 inch x 1.75 inch
leather panel
(sewn over elastic strap)
Cut along dotted line to exend the bottom vest pattern 2cm if th
3.75 inch x 1.5 inch leather panel (sewn over belt lo
.75 inch leather
2 inch wide webbing
6 inches long
stitch area
2 inch wide webbing
6 inches long
stitch area
1.75 inch
panel
ver elastic strap)
Cut along dot
m vest pattern 2cm if the wearers height is more than 6 feet 3 inches tall
el (sewn over belt loops)
eather
2 inch wide webbing
6 inches long
stitch area
2
6
inch wide webbing
inches long
2 inch x 1.75 inch
leather panel
(sewn over
elastic strap)
titch area
Cut along dotted line to exend the bottom vest pattern 2cm if the wearers height is more than 6 feet 3 inches tall
2 inch wide webbing
6 inches long
stitch area
3.75 inch x 1.5 inch leather panel (sewn over belt loops)
.75 inch leather
s tall
lt loops)
Collar strap
stitch area
Based off screen-used
Judge Griffin Armor
courtesy StudioCreations.com
2014.04.26
Front or Back
Elastic strap
stitch
area
DREDD (2012)
Ribbed Shoulder Panel 2
leather panel
(sewn over leather
belt loop)
.75 inch
leather
belt loop
(3 inches long)
Note: A
Loop is
version
If you a
vest, yo
placem
bottom
leather panel
(sewn over leather
belt loop)
Note: A Third Leather Belt
Loop is present on the ‘hero’
version of DREDD’s vest.
If you add the third loop to the
vest, you need to widen out the
placement of the loops along the
bottom of the vest accordingly.
.75 inch
leather
belt loop
(3 inches long)
Bicep tab
Stitch area
Bicep tab
Stitch area
leather panel
ewn over leather
belt loop)
.75 inch leather
Belt Loops
Elastic strap
stitch
area
Bicep tab
Stitch area
eather
oops
Front or Back
Elastic strap
stitch
area
Collar strap
stitch area
DREDD (2012)
Eagle Shoulder Panel 1
2014.04.26
Based off screen-used
Judge Griffin Armor
courtesy StudioCreations.com
.75 inch leather
Belt Loops
Front or Back
Elastic strap
stitch
area
Based off screen-used
Judge Griffin Armor
courtesy StudioCreations.com
2014.04.26
DREDD (2012)
Ribbed Shoulder Panel 1
Collar strap
stitch area
Bicep tab
Stitch area
Bicep tab
Stitch area
Bicep tab
Stitch area
Front or Back
Elastic strap
stitch
area
Collar strap
stitch area
DREDD (2012)
Eagle Shoulder Panel 2
2014.04.26
Based off screen-used
Judge Griffin Armor
courtesy StudioCreations.com
Front or Back
Elastic strap
stitch
area
`