Cable Version Replace your iQ3 Follow these simple steps to swap your current box with your new iQ3. 1 Connect your new iQ3 A on’t be a maverick – make sure your TV and D existing Foxtel iQ3 are turned off at the wall. Digital Audio Out C B D 12V DC 5A max Optical Cable Input Coaxial HDMI USB 5V DC 500mA Ethernet Remove the cables from your old iQ3, and connect them into the same socket on your new box, one by one. Once you’re connected, turn your TV and iQ3 on and select the HDMI source you’ve connected to. To Foxtel wall plate To TV To internet access point To power point (optional) 2 Bluetooth pairing your iQ3 remote Bring your remote to the front of the iQ3 until the front of the box lights up. Reset your existing remote by pressing the button located underneath the battery cover. The iQ3 will light up when it connects with your remote. Once the lights on the iQ3 and remote stop flashing, you’re set. Press any button on your remote until the blue light starts to flash. 3 Connecting your iQ3 to the internet To get the most out of your iQ3 features, connect your Ethernet lead from your modem to the back of the iQ3, or connect to WiFi by following these steps: Select Home on your iQ3 remote, then arrow right and select Settings. Select Internet Connection. Select WiFi. Select your network. 4 Activating your iQ3 Nearly done! n the sticker on the outside of your iQ3 O carton, find your box number (the first 16 digits only) and your smartcard number. Then call 1300 732 681 and follow the prompts You’re now up and running Make sure you return your old iQ3 to us so we can check what went wrong. Just take the enclosed letter, label and your old iQ3 to an Australia Post outlet and we’ll take care of the rest. FOX0020 09/14 SAT/REP For troubleshooting or support, go to the Help section in your iQ3 Settings or visit foxtel.com.au/support Enter your WiFi password, select Done and you will be advised once connected.
© Copyright 2018