Doc: TED 24(1036)W ISO 1496

Doc: TED 24(1036)W
ISO 1496-2:2008
Please Contact at Telefax टलीफ्स: 23236311 E-mail: [email protected] in
्या प
चालालम
म
स ा DRAFT IN WIDE CIRCULATION
रलख रषण सूलमा /DOCUMENT DESPATCH ADVICE
---------------------------------------------------------------टीईडी 24/टी-37 TED 24/T-37
10-09-2014
----------------------------------------------------------------चावहम पज, पजब ी सहहता, ा्धााप एव लट ववषय सम तत, टीईडी 24
TRANSPORT PACKAGES, PACKAGING CODES, FREIGHT CONTAINERS AND PALLETS SECTIONAL COMMITTEE, TED 24
प) चावहम इंजीतमयचांग ववभाग चाष । ंइवव । प ूचल ा्म वाल स ‍य
1) Interested Members of Transport Engineering Division Council, TEDC
ख)
चावहम पज,
पजब ी सहहता,
ालधााप एव
लट ववषय सम तत टी ई डी 24 प सभी स ‍यं पो
2) All Members of Transport Packages, Packaging Codes, Freight Containers and Pallets Sectional Committee, TED 24
ग) अ्य सभी ूचल ाखम वाल तमपाय
3. All Others Interested.
हो य/ हो या, Dear Sir/Madam,
तम्ममलिखत रलख संल‍म ह:
Please find enclosed the following draft standard:
रलख संखया
/Document No.
विषय/ Title
Series 1 Freight containers – Specification and testing - Part 2: Thermal containers
(Second Revision of IS 13288(Part 2):2001/ ISO 1496-2:1996
by adoption of ISO 1496-2:2008)
24(1036) W
पृ्या र ाो्त
ााटरीय
ामप
ामप प ू
स
पा अवलोपम पा अ मी स् ततयां यह बतात हुए भजम, कप यह अंतत यह ामप
म ‍वीपृत हो जाए, तो इस ा अ ल पाम म क प ्यवसाय अववा पााोबाा म ्या
पहिमाइयां क सपती ह ।
Kindly examine this draft standard and forward your views stating any difficulty which you are likely to experience in
your business or profession, if this is finally adopted as National Standard.
स् तत प अ््त
ततचव/ Last date for comments: 10-12-2014
स् तत यह पोई हो तो ीछ ह ए गए राू
म मलख पा, ऊ ामलिखत त ा अधोह‍तार पो भजम ।
Comments, if any, may please be made in the format given overleaf and mailed to the undersigned at the above
address.
ध्यवा , Thanking you,
भव ीय, Yours faithfully,
संल‍म ऊ ामलिखत /Encl: As above
वञातमप एफ/ एवं र ुख…
( एम. प. श ाा)(N.K.Sharma)
चावहम इं्ज… Scientist F & Head TED
Doc: TED 24(1036)W
ISO 1496-2:2008
FORMAT FOR SENDING COMMENTS ON BIS DOCUMENTS
(Please use A4 size sheet of paper only and type within fields indicated. Comments on
each clauses/sub-clauses/table/fig. etc be started on a fresh box. Information in Column
4 should include reasons for the comments and suggestions for modified wording of the
clauses when the existing text is found not acceptable. Adherence to this format
facilitates Secretariat’s work)
Doc. No.: ______________
TITLE: ________________________________________
LAST DATE OF COMMENTS: ________________
NAME OF THE COMMENTATOR/ORGANIZATION: _________________________
Sl.
No.
Clause/Subclause/
para/table/fig.
No. commented
Type of
Comments
(General/Edi
torial/
Technical)
Justification
Proposed change
Doc: TED 24(1036)W
ISO 1496-2:2008
For Comments only
Draft Indian Standard
Series 1 Freight containers – Specification and testing Part 2: Thermal containers
(Second revision of IS 13288(Part 2):2001/ISO 1496-2:1996)
Not to be reproduced or used as a Standard
Without the permission of BIS
Last date for receipt of comments
10-12-2014
NATIONAL FOREWORD
This draft Indian Standard which is identical with ISO 1496-2:2008 ‘Series 1 Freight
containers – Specification and testing Part 2 : Thermal containers’ issued by the International
Organization for Standardization (ISO), shall be adopted by Bureau of Indian Standards on
the recommendation of the Transport Packages, Packaging Codes, Freight Containers and
Pallets Sectional Committee and approval of the Transport Engineering Division Council.
This Standard was first published in 1993 as adoption of ISO 1496-2:1988. Then the
Standard was first revised in 2001 after the revision of ISO 1496-2 in 1996. Subsequent to the
revision of ISO 1496-2 in 2008, the second revision of this Standard has been undertaken to
bring it in line with the revised ISO standard.
The text of ISO Standard has been proposed to be approved as suitable for publication as
Indian Standard without deviations. Certain conventions and terminologies are, however, not
identical to those used in Indian Standard. Attention is particularly drawn to the following:
a) Wherever the words ‘International Standard’ appear referring to this standard,
they should be read as ‘Indian Standard’.
b) Comma (,) has been used as a decimal marker while in Indian Standards, the
current practice is to use a point (.) as the decimal marker.
In this adopted standard, reference appears to the following International Standards for which
Indian Standards also exist. The Corresponding Indian Standard which is to be substituted in
its place is given below along with their degree of equivalence for the edition indicated:
International Standard
ISO 668:1995
Series 1 Freight containers –
Classification, dimensions
and ratings
ISO 830:1999
Freight containers –
Vocabulary
Corresponding Indian
Standard
IS 6566:2001 Series 1
Freight containers –
Classification, dimensions
and ratings (third revision)
IS 6569:2004
Freight containers –
Vocabulary (Third revision)
Degree of
equivalence
Identical
Identical
Doc: TED 24(1036)W
ISO 1496-2:2008
ISO 1161:1984
Series 1 Freight containers –
Corner fittings –
Specification
ISO 6346:1995
Freight containers – Coding
identification and marking
IS 7694:1992 Series 1
Freight containers –
Corner fittings –
Specification (Second
revision)
IS 6928:2001 Freight
containers – Coding
identification and marking
(Third revision)
Identical
Identical
The technical committee responsible for preparation of this standard has reviewed the
provisions of the following International Standards referred in this adopted standard and has
decided that they are acceptable for use in conjunction with this standard.
International Standard
ISO 10368:2006
IEC 60947-1
Title
Freight thermal containers – Remote condition monitoring
Low-voltage switchgear and control gear – Part1: General rules
This Standard also makes a reference to the BIS Certification Marking, details of which are given
in National Annex A.
For the purpose of deciding whether a particular requirement of this standard is complied
with, the final value, observed or calculated, expressing the result of a test or analysis, shall
be rounded off in accordance with IS 2:1960 ‘Rules for rounding off numerical values
(revised)’. The number of significant places retained in the rounded off value should be the
same as that of the specified value in this standard.
‘FOR COMPLETE TEXT OF THE DOCUMENT KINDLY REFER ISO 1496-2:2008
OR CONTACT:
Sc. F & Head
Transport Engineering Department,
Bureau of Indian Standards,
9 Bahadur Shah Zafar Marg,
New Delhi-110002
Telefax: 23236311
E-mail: [email protected]
Doc: TED 24(1036)W
ISO 1496-2:2008
NATIONAL ANNEX A
(Foreword)
A-1 BIS CERTIFICATION MARKING
A-1.1 The product may also be marked with the Standard Mark.
A-1.2 The use of the Standard Mark is governed by the provisions of the Bureau of Indian
Standards Act, 1986 and the Rules and Regulations made there under. The details of
conditions under which the licence for the use of the Standard Mark may be granted to the
manufacturers or producers may be obtained from the Bureau of Indian Standards.
Doc: TED 24(1037)W
ISO 3676 : 2012
Please Contact at Telefax टलीफ्स: 23236311 E-mail: [email protected] in
्या प
चालालम
म
स ा DRAFT IN WIDE CIRCULATION
रलख रषण सूलमा /DOCUMENT DESPATCH ADVICE
---------------------------------------------------------------टीईडी 24/टी-25 TED 24/T-25
10-09-2014
----------------------------------------------------------------चावहम पज, पजब ी सहहता, ा्धााप एव लट ववषय सम तत, टीईडी 24
TRANSPORT PACKAGES, PACKAGING CODES, FREIGHT CONTAINERS AND PALLETS SECTIONAL COMMITTEE, TED 24
प) चावहम इंजीतमयचांग ववभाग चाष । ंइवव । प ूचल ा्म वाल स ‍य
1) Interested Members of Transport Engineering Division Council, TEDC
ख)
चावहम पज,
पजब ी सहहता,
ा्धााप एव
लट ववषय सम तत टी ई डी 24 प सभी स ‍यं पो
2) All Members of Transport Packages, Packaging Codes, Freight Containers and Pallets Sectional Committee, TED 24
ग) अ्य सभी ूचल ाखम वाल तमपाय
3. All Others Interested.
हो य/ हो या, Dear Sir/Madam,
तम्ममलिखत रलख संल‍म ह:
Please find enclosed the following draft standard:
रलख संखया
/Document No.
विषय/ Title
Packaging -- Complete, filled transport packages and unit loads –
Unit load dimensions (First Revision of IS 14208:1995/ ISO 3676:1983
by adoption of ISO 3676:2012)
24(1037) W
पृ्या र ाो्त
ााटरीय
ामप
ामप प ू
स
पा अवलोपम पा अ मी स् ततयां यह बतात हएए भजम, िप यह अंतत यह ामप
म ‍वीपृत हो जाए, तो इस ा अ ल पाम म क प ्यवसाय अववा पााोबाा म ्या
पहिमाइयां क सपती ह ।
Kindly examine this draft standard and forward your views stating any difficulty which you are likely to experience in
your business or profession, if this is finally adopted as National Standard.
स् तत प अ््त
ततचव/ Last date for comments: 10-12-2014
स् तत यह पोई हो तो ीछ ह ए गए राू
म मलख पा, ऊ ामलिखत त ा अधोह‍तार पो भजम ।
Comments, if any, may please be made in the format given overleaf and mailed to the undersigned at the above
address.
ध्यवा , Thanking you,
भव ीय, Yours faithfully,
संल‍म ऊ ामलिखत /Encl: As above
वञातमप एफ/ एवं र एख…
( एम. प. श ाा)(N.K.Sharma)
चावहम इं्ज… Scientist F & Head TED
Doc: TED 24(1037)W
ISO 3676 : 2012
FORMAT FOR SENDING COMMENTS ON BIS DOCUMENTS
(Please use A4 size sheet of paper only and type within fields indicated. Comments on
each clauses/sub-clauses/table/fig. etc be started on a fresh box. Information in Column
4 should include reasons for the comments and suggestions for modified wording of the
clauses when the existing text is found not acceptable. Adherence to this format
facilitates Secretariat’s work)
Doc. No.: ______________
TITLE: ________________________________________
LAST DATE OF COMMENTS: ________________
NAME OF THE COMMENTATOR/ORGANIZATION: _________________________
Sl.
No.
Clause/Subclause/
para/table/fig.
No. commented
Type of
Comments
(General/Edi
torial/
Technical)
Justification
Proposed change
Doc: TED 24(1037)W
ISO 3676 : 2012
For Comments only
Draft Indian Standard
Packaging -- Complete, filled transport packages and unit loads – Unit load dimensions
(First revision of IS 14208:1995/ISO 3676:1983)
Not to be reproduced or used as a Standard
Without the permission of BIS
Last date for receipt of comments
10-12-2014
NATIONAL FOREWORD
This draft Indian Standard which is identical with ISO 3676:2012 ‘Packaging -- Complete,
filled transport packages and unit loads – Unit Load dimensions’ issued by the International
Organization for Standardization (ISO), shall be adopted by Bureau of Indian Standards on
the recommendation of the Transport Packages, Packaging Codes, Freight Containers and
Pallets Sectional Committee and approval of the Transport Engineering Division Council.
This Indian Standard was first published in 1995 as adoption of ISO 3676:1983.
Subsequently ISO 3676:1983 was technically revised and published as ISO 3676:2012. This
revision has been undertaken to harmonize the standard with latest version of ISO standard.
The text of ISO Standard has been proposed to be approved as suitable for publication as
Indian Standard without deviations. Certain conventions and terminologies are, however, not
identical to those used in Indian Standard. Attention is particularly drawn to the following:
a) Wherever the words ‘International Standard’ appear referring to this standard,
they should be read as ‘Indian Standard’.
b) Comma (,) has been used as a decimal marker while in Indian Standards, the
current practice is to use a point (.) as the decimal marker.
In this adopted standard, reference appears to certain International Standard for which Indian
Standard also exist. The Corresponding Indian Standard which is to be substituted in its place
is given below along with their degree of equivalence for the edition indicated:
International Standard
ISO 1496-1:1990
Series 1 Freight containers –
Specification and testing –
Part 1 : General cargo
containers for general
purposes
Corresponding Indian
Standard
IS 13288 (Part 1):1993
Series 1 Freight containers Specification and testing :
Part 1 General cargo
containers for general
purposes
Degree of
equivalence
Identical
Doc: TED 24(1037)W
ISO 3676 : 2012
The technical committee responsible for preparation of this standard has reviewed the
provisions of the following International Standards referred in this adopted standard and has
decided that they are acceptable for use in conjunction with this standard.
International Standard
ISO 21067
EN 284
EN 452
CEN/TS 13853
CEN/TS 14993
Title
Packaging — Vocabulary
Swap bodies — Non stackable swap bodies of class C —
Dimensions and general requirements
Swap bodies — Swap bodies of class A — Dimensions and general
requirements
Swap bodies for combined transport — Stackable swap bodies
type C 745-S16 — Dimensions, design requirements and testing
Swap bodies for combined transport — Stackable swap bodies
type A 1371— Dimensions, design requirements and testing
For the purpose of deciding whether a particular requirement of this standard is complied
with, the final value, observed or calculated, expressing the result of a test or analysis, shall
be rounded off in accordance with IS 2:1960 ‘Rules for rounding off numerical values
(revised)’. The number of significant places retained in the rounded off value should be the
same as that of the specified value in this standard.
FOR COMPLETE TEXT OF THE DOCUMENT, KINDLY REFER ISO 3676:2012
OR CONTACT:
Sc. F & Head
Transport Engineering Department,
Bureau of Indian Standards,
9 Bahadur Shah Zafar Marg,
New Delhi-110002
Telefax: 23236311
E-mail: [email protected]
`