catalog - Molenaar North America

Catalog
WWW.MOLENAAR-AMERICAS.COM
INDEX
Molenaar North America .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Prevent corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Technical data .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Why choose concrete spacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
03
04
04
05
1.6 SLAB BOLSTERS
MoRib® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
MoSwing® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
½ MoSwing® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
MoSwing® with wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1CONCRETE SPACERS
½ MoSwing® with wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1.1 MOCLIP® SPACERS
2 FORMWORK SPACERS
MoClip Trio
®
®
.........................................................
06
MoClip® #5+ Trio® .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06
2.1 DYWIDAG SYSTEM PRODUCTS
MoClip Flat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07
MoPlus® Center Cone.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
MoClip Tapered
Concrete plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
®
®
®
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MoClip #5+ Tapered
®
®
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
07
07
2.2 WALL AND TUNNELING CONSTRUCTION PRODUCTS
1.2 MOSTEK SPACERS
Kicker blocks for tunnel system formwork . . . . . . . . . . . . . . . . . . . . . . . 17
MoStek® #1–#2 Trio® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08
Kicker blocks model A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
MoStek #3–#5 Trio
®
08
Plastic Cone .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
MoStek® #1–#2 Flat .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08
Cone removal pen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
MoStek #3–#5 Flat .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09
Concrete cone D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
MoStek® #1–#2 Tapered® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09
MoBikon®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
MoStek® #3–#5 Tapered® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09
MoStopper®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
1.3 SPACERS WITH WIRE
2.3 GLUE
Trio® with wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Molenaar dispersion glue. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Flat with wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
MoVast® cement glue. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
®
®
................................................
®
Tapered with wire small. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
®
Tapered® with wire medium. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Tapered® with wire big. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
MoWip® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.4 SPACERS FOR SELF CONSOLIDATING CONCRETE
MoNoClip® #2–#5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
MoNoClip® #5+ .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
MoNoStek® #1–#5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
MoNoStek® #3–#5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1.5 BAR SUPPORTS
A-Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
L-Type® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
No part of this publication may be duplicated and/or published
MoBet® .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
by means of printing, photocopying or by any other means whatsoever
MoBlok
®
..............................................................
13
Tapered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
02
without the prior written permission of Molenaar North America Inc.
January 2015
CATALOG
MOLENAAR NORTH AMERICA
About us
Since its beginning, company ownership had been kept within
Molenaar North America has been the subsidiary of Molenaar
the family. Ad Molenaar resigned in 1986, and his son Jaco
Betonindustrie B.V. since 2013. Molenaar specializes in concrete
Molenaar followed in his footsteps. Jaco expanded the company
spacers and concrete formwork products for the concrete industry.
even further and started to operate internationally. This resulted
We are the most innovative company in the field of concrete
in a subsidiary in Spain as well as exporting to various markets in
spacers and provide products tailored to our customers’ needs in
Europe and worldwide.
the highest quality.
Since 2009, Corné Molenaar, son of Jaco Molenaar, also joined the
Address:
company. Like his father and grandfather before him, Corné star-
3625 Greenside Court, Dacula, GA 30019, United States of America
ted to expand the business even more. In 2013, Molenaar North
T: 404 493 7628 | E: [email protected]
America Inc. was established. By making this choice of entering
www.molenaar-americas.com
the North American market, Corné opened the possibility of a
second base here for the Molenaar Group.
History
Molenaar Betonindustrie B.V. was incorporated in 1953 in
Our products - our knowhow - our passion
Dordrecht, the hometown of company founder Ad Molenaar,
With more than 60 years’ experience, Molenaar Betonindustrie is
who was working for the postal service at the time. When a local
built on flexibility and innovation. Molenaar has developed many
construction project came to a standstill because of a shortage of
new products for its domestic and foreign markets. The high
concrete spacers, Ad saw a market opportunity. He started produ-
quality of its spacers, supported by the KOMO certificate, is a mark
cing concrete spacers in the basement of his parent’s house with
of the reliability of the Molenaar name. The KOMO certificate and
a weekly production of 2,000 spacers.
other quality reports are available on request.
In 1955, he moved the company to a larger building in the center
Molenaar North America can also produce specialty products
of the city as production and sales became a full-time job for
for its customers. Specialty products include colored concrete,
two people. By 1959, Molenaar Betonindustrie outgrew this pro-
concrete with admixtures and spacers with unique sizes.
duction facility and moved to the harbor industrial area of the city
Molenaar spacers have proven their value in mega projects using
of Goes. Expansion of this facility started in 1963 with another
concrete, including the Zeelandbrug, the Heinenoord tunnel, the
production building, and the expansion continued as the facility
Deltaworks and Westerscheldetunnel in the Netherlands, as well
reached five times its original size in 1979. A new facility with all
as oil scaffolding in Aruba, central market buildings on Curaçao,
production under one roof was opened in Goes in 1988.
Öresund in Denmark and the Bahrein Causeway in Saudi Arabia.
MOLENAAR NORTH AMERICA INC.
03
PREVENT CORROSION
PREVENT CORROSION
The concrete cover protects the reinforcement and prevents
• The spacers are completely embedded in the concrete and sha-
corrosion. Protecting this concrete cover from deterioration is
an important step towards maintaining the integrity of your
ped for minimal visual effects on finished surfaces.
• High structural strength and stiffness support heavy construction
structure.
loads and ensure proper positioning. Fewer supports may be
needed compared to weaker and softer supports of alternative
Therefore, material integrity of the concrete cover must be
maintained. Molenaar has designed its concrete spacers in various
materials.
• MoClip®, MoStek® or embedded tie wires ensure secure and
proper positioning.
shapes and sizes using high-performance, wet-cast concrete to
provide flawless material integrity of the concrete cover.
• Low absorption and permeability of air and chlorides.
• Low diffusion coefficients reduce diffusion of chloride ions
through the concrete to the rebar.
Placing rebar is quick, easy and accurate with the various fixing
methods the spacers offer. With Molenaar spacers, you can be
• Longer resistance to chemical attacks than other products.
confident that the reinforcement will be well-protected from
• High electric resistivity reduces the rate of corrosion.
corrosion, because:
• Thermal expansion compatibility with the surrounding concrete
of the structure. Non-cementitious and non-bonding spacers
• Cementitious spacers are bonding to the surrounding concrete.
Non-cementitious and non-bonding bar supports, even if rust-
with higher thermal expansion and contraction values can cause
free, are susceptible to ingress of chlorides at the interface with
separation with a slight gap that provides an inlet for chlorides
the surrounding concrete.
where the spacers interface with the concrete.
TECHNICAL DATA OF THE CONCRETE MOLENAAR NORTH AMERICA SUPPLIES:
Type of concrete
7977 PSI (Standard)
10878 PSI (Request)
10351 PSI Silica (Request)
Design W/C
0.43
0.34
0.36
Minimal Cement
≥ 24 lbs.
≥ 24 lbs.
≥ 24 lbs.
Cement
CEM III/B 42,5 HS
CEM III/B 42,5 HS
CEM I/B 52,5 HS
Sand 0 – 2 mm
Sand 0 – 2 mm
Silica fume
Gravel 2 – 8 mm
Gravel 2 – 8 mm
Sand 0 – 2 mm
Tap water
Tap water
Gravel 2 – 8 mm
7977 PSI
10878 PSI
Tap water
Compressive strength ≥
04
10351 PSI
CATALOG
WHY TO CHOOSE CONCRETE SPACERS
WHY TO CHOOSE CONCRETE SPACERS
Plastic spacers and bar supports
Concrete spacers and bar supports
Plastic spacers and bar supports do not bond well with concrete.
Concrete spacers and bar supports are made of the same material
When the concrete is poured into the form, a small gap is created
as the poured concrete, so thermal expansion and contraction are
between it and the plastic. Plastic has a coefficient of thermal
equal. And because they are the same material, the concrete and
expansion and contraction 10 to 15 times that of concrete, and
spacers will bond. No gaps!
when subjected to temperature variations, the plastic continues to
expand and contract at that higher coefficient. At high temperatu-
Concrete spacers and bar supports help maintain material
res, plastic can even melt. The result is a separation between the
integrity and uniformity of the concrete, and provide a cover
spacers and the poured concrete, creating a free passage for
over the reinforcement that protects against corrosion. Concrete
corrosive agents to reach the steel reinforcement from the
spacers can also be produced in the same mixture as the poured
exterior of the concrete product. This will cause the steel –
concrete which will give it the same structure and color.
and eventually the concrete – to corrode.
Concrete spacers with a plastic MoClip® or MoStek®.
If steam curing is applied to the concrete, the heat in the curing
What about Molenaar’s concrete spacers with a plastic MoClip®
process causes the plastic to expand while the concrete is relati-
or MoStek®? Does the plastic MoClip® or MoStek® in the concre-
vely fresh and weak. After reaching the maximum curing tempe-
te spacer have a negative effect on material integrity? Does it
rature and volume expansion of the plastic, the temperature is
weaken the corrosion protective cover over the reinforcement?
held at this level until the concrete reaches the desired strength.
The answer is no!
After curing, the subsequent lower temperatures cause the plastic
to contract, and a gap remains at the interface between the
The plastic MoClip® or MoStek® is placed on the top of the spacer
plastic and concrete.
and does not come into contact with the surface of the concrete
product. The plastic MoClip® or MoStek® is embedded only 5 mm
Plastic spacers are also subject to corrosion when they come into
into the spacer, which maintains the material integrity at the
contact with chlorides and chemicals, where concrete has a much
product’s surface. The plastic in the MoClip® or MoStek® is used
higher resistance.
only for easily attaching to and holding the reinforcement, leaving
the concrete part to do the work of the spacer.
MOLENAAR NORTH AMERICA INC.
05
1
CONCRETE SPACERS
1.1 MOCLIP ® SPACERS
THE ADVANTAGES OF CONCRETE SPACERS:
THE ADVANTAGES OF THE MOCLIP®:
• Optimum adhesion
•H
olds more weight
• Various MoClip® colors for different sizes for the MoClip #2 – #5
• Minimum water absorption
•N
o deformation, cover
• Quick and easy assembly leads to savings
• Maintaining of the material
• Does not cause a loss of cover
guaranteed
integrity
• C olored concrete possible
Tip: Place the spacers in a bucket of water before using. Wet spacers improve concrete bonding.
MOCLIP® TRIO ® FOR REBAR SIZE Ø #2 – #5
The advantages of flat- and round-headed versions are combined in a single model called the Trio®. The Trio has the invisibility of the
round-headed model and at least the stability of a flat-headed model. Because of its three rounded feet it is more stable on rough
surfaces. The three rounded feet ensure that they are nearly invisible, the precision-engineered curves ensure that even high-density
concrete can flow under the Trio spacer to produce a smooth result. The Trio spacer is often used in the production of lining elements
and other round forms.
Art.no.
Description
Wt./pkg Pc./pack
US.112.034
MoClip Trio ¾”
48,50 lbs
468
US.112.100
MoClip® Trio® 1”
50,71 lbs
360
US.112.114
MoClip Trio 1¼”
48,50 lbs
288
US.112.112
MoClip® Trio® 1½
46,30 lbs
180
US.112.134
MoClip Trio 1¾”
44,09 lbs
144
US.112.200
MoClip® Trio® 2”
50,71 lbs
144
US.112.214
MoClip® Trio® 2¼”
41,89 lbs
108
US.112.212
MoClip Trio 2½”
50,71 lbs
108
US.112.234
MoClip® Trio® 2¾”
40,79 lbs
72
US.112.300
MoClip Trio 3”
41,89 lbs
72
®
®
®
®
®
®
®
®
®
®
PRODUCT PICTURE
MOCLIP® #5+ TRIO ® FOR REBAR SIZE Ø #5 – #8
06
Art.no.
Description
Wt./pkg Pc./pack
US.113.034
MoClip #5+ Trio ¾”
48,50 lbs
468
US.113.100
MoClip® #5+ Trio® 1”
50,71 lbs
360
US.113.114
MoClip #5+ Trio 1¼”
48,50 lbs
288
US.113.113
MoClip® #5+ Trio® 1½”
46,30 lbs
180
US.113.134
MoClip #5+ Trio 1¾”
44.09 lbs
144
US.113.200
MoClip® #5+ Trio® 2”
50,71 lbs
144
US.113.214
MoClip® #5+ Trio® 2¼”
41,89 lbs
108
US.113.212
MoClip #5+ Trio 2½”
50,71 lbs
108
US.113.234
MoClip® #5+ Trio® 2¾”
40,79 lbs
72
US.113.300
MoClip #5+ Trio 3”
41,89 lbs
72
®
®
®
®
®
®
®
®
®
®
PRODUCT PICTURE
CATALOG
CONCRETE SPACERS
1
MOCLIP ® SPACERS 1.1
MOCLIP® FLAT FOR REBAR SIZE Ø #2 – #5
Art.no.
Description
Wt./pkg Pc./pack
US.102.034
®
MoClip Flat ¾”
39,68 lbs
510
US.102.100
MoClip® Flat 1”
44,09 lbs
510
US.102.114
MoClip Flat 1¼”
50,71 lbs
410
US.102.112
MoClip® Flat 1½”
50,71 lbs
350
US.102.134
®
MoClip Flat 1¾”
44,09 lbs
175
US.102.200
MoClip® Flat 2”
46,30 lbs
175
US.102.212
MoClip Flat 2½”
33,07 lbs
40
US.102.234
MoClip® Flat 2¾“
46,30 lbs
40
US.102.300
MoClip® Flat 3”
49,38 lbs
40
®
®
PRODUCT PICTURE
MoClip® Tapered® spacers are used on heavy reinforcement and where the soil requires it.
MOCLIP® TAPERED ® FOR REBAR SIZE Ø #2 – #5
Art.no.
Description
Wt./pkg Pc./pack
US.502.034
MoClip Tapered small ¾”
50,71 lbs
285
US.502.100
MoClip® Tapered® small 1”
46,30 lbs
210
US.502.114
MoClip Tapered small 1¼”
48,50 lbs
175
US.502.512
MoClip® Tapered® small 1½”
48,50 lbs
140
US.502.134
MoClip Tapered small 2”
44,09 lbs
100
®
®
®
®
®
®
PRODUCT PICTURE
MOCLIP® #5+ TAPERED ® FOR REBAR SIZE Ø #5 – #8
Art.no.
Description
Wt./pkg Pc./pack
US.503.034
MoClip #5+ Tapered small ¾”
50,71 lbs
285
US.503.100
MoClip® #5+ Tapered® small 1”
46,30 lbs
210
US.503.114
MoClip #5+ Tapered small 1¼”
48,50 lbs
175
US.503.512
MoClip® #5+ Tapered® small 1½”
48,50 lbs
140
US.503.134
MoClip #5+ Tapered small 2”
44,09 lbs
100
®
®
®
MOLENAAR NORTH AMERICA INC.
®
®
®
PRODUCT PICTURE
07
1
CONCRETE SPACERS
1.2 MOSTEK ® SPACERS
THE ADVANTAGES OF CONCRETE SPACERS:
THE ADVANTAGES OF THE MOSTEK®:
• Optimum adhesion
•H
olds more weight
• No rust stains on the concrete
• Minimum water absorption
•N
o deformation, cover
• Fast and easy assembly
• Maintaining of the material
guaranteed
integrity
• Reduces the pressure on the formwork
• C olored concrete possible
Tip: Place the spacers in a bucket of water before using. Wet spacers improve concrete bonding.
MOSTEK ® TRIO ® FOR REBAR SIZE Ø #1 – #2
Art.no.
Description
Wt./pkg Pc./pack
US.114.034
MoStek Ø#1–#2 Trio ¾”
48,50 lbs
468
US.114.100
MoStek® Ø#1–#2 Trio® 1”
50,71 lbs
360
US.114.114
MoStek Ø#1–#2 Trio 1¼"
48,50 lbs
288
US.114.112
MoStek® Ø#1–#2 Trio® 1½"
46,30 lbs
180
US.114.134
MoStek Ø#1–#2 Trio 1¾”
44,09 lbs
144
US.114.200
MoStek® Ø#1–#2 Trio® 2”
50,71 lbs
144
US.114.214
MoStek Ø#1–#2 Trio 2¼”
41,89 lbs
108
US.114.212
MoStek® Ø#1–#2 Trio® 2½”
50,71 lbs
108
US.114.234
MoStek® Ø#1–#2 Trio® 2¾”
40,79 lbs
72
US.114.300
MoStek Ø#1–#2 Trio 3”
41,89 lbs
72
®
®
®
®
®
®
®
®
®
®
PRODUCT PICTURE
MOSTEK ® TRIO ® FOR REBAR SIZE Ø #3 – #5
Art.no.
Description
Wt./pkg Pc./pack
US.115.034
MoStek® Ø#3–#5 Trio® ¾”
48,50 lbs
468
US.115.034
MoStek® Ø#3–#5 Trio® 1”
50,71 lbs
360
US.115.114
MoStek® Ø#3–#5 Trio® 1¼”
48,50 lbs
288
US.115.112
MoStek Ø#3–#5 Trio 1½”
46,30 lbs
180
US.115.134
MoStek® Ø#3–#5 Trio® 1¾”
44,09 lbs
144
US.115.200
MoStek Ø#3–#5 Trio 2”
50,71 lbs
144
US.115.214
MoStek® Ø#3–#5 Trio® 2¼”
41,89 lbs
108
US.115.212
MoStek® Ø#3–#5 Trio® 2½”
50,71 lbs
108
US.115.234
MoStek Ø#3–#5 Trio 2¾”
40,79 lbs
72
US.115.300
MoStek® Ø#3–#5 Trio® 3”
41,89 lbs
72
®
®
®
®
®
®
PRODUCT PICTURE
MOSTEK ® FLAT FOR REBAR SIZE Ø #1 – #2
08
Art.no.
Description
Wt./pkg Pc./pack
US.104.034
MoStek® Ø#1–#2 Flat ¾”
39,68 lbs
510
US.104.100
MoStek® Ø#1–#2 Flat 1”
44,09 lbs
510
US.104.114
MoStek® Ø#1–#2 Flat 1¼”
50,71 lbs
410
US.104.112
MoStek Ø#1–#2 Flat 1½”
50,71 lbs
350
US.104.134
MoStek® Ø#1–#2 Flat 1¾”
44,09 lbs
175
®
PRODUCT PICTURE
CATALOG
CONCRETE SPACERS
1
MOSTEK ® SPACERS 1.2
MOSTEK ® FLAT FOR REBAR SIZE Ø #1 – #2
US.104.200
MoStek® Ø#1–#2 Flat 2”
46,30 lbs
175
US.104.212
MoStek® Ø#1–#2 Flat 2½"
33,07 lbs
40
US.104.234
MoStek® Ø#1–#2 Flat 2¾“
46,30 lbs
40
US.104.300
MoStek Ø#1–#2 Flat 3”
49,38 lbs
40
®
PRODUCT PICTURE
MOSTEK ® FLAT FOR REBAR SIZE Ø #3 – #5
Art.no.
Description
Wt./pkg Pc./pack
US.105.034
MoStek® Ø#3–#5 Flat ¾”
39,68 lbs
510
US.105.100
MoStek® Ø#3–#5 Flat 1”
44,09 lbs
510
US.105.114
MoStek® Ø#3–#5 Flat 1¼”
50,71 lbs
410
US.105.112
MoStek® Ø#3–#5 Flat 1½”
50,71 lbs
350
US.105.134
MoStek Ø#3–#5 Flat 1¾”
44,09 lbs
175
US.105.200
MoStek® Ø#3–#5 Flat 2”
46,30 lbs
175
US.105.212
MoStek Ø#3–#5 Flat 2½”
33,07 lbs
40
US.105.234
MoStek® Ø#3–#5 Flat 2¾“
46,30 lbs
40
US.105.300
MoStek Ø#3–#5 Flat 3”
49,38 lbs
40
®
®
®
PRODUCT PICTURE
MOSTEK ® TAPERED ® FOR REBAR SIZE Ø #1 – #2
Art.no.
Description
Wt./pkg Pc./pack
US.504.034
MoStek® Ø#1–#2 Tapered® small ¾”
50,71 lbs
285
US.504.100
MoStek® Ø#1–#2 Tapered® small 1”
46,30 lbs
210
US.504.114
MoStek® Ø#1–#2 Tapered® small 1¼”
48,50 lbs
175
US.504.504
MoStek Ø#1–#2 Tapered small 1½”
48,50 lbs
140
US.504.134
MoStek® Ø#1–#2 Tapered® small 2”
44,09 lbs
100
®
®
PRODUCT PICTURE
MOSTEK ® TAPERED ® FOR REBAR SIZE Ø #3 – #5
Art.no.
Description
Wt./pkg Pc./pack
US.505.034
MoStek Ø#3–#5 Tapered small ¾”
50,71 lbs
285
US.505.100
MoStek® Ø#3–#5 Tapered® small 1”
46,30 lbs
210
US.505.114
MoStek Ø#3–#5 Tapered small 1¼”
48,50 lbs
175
US.505.505
MoStek® Ø#3–#5 Tapered® small 1½”
48,50 lbs
140
US.505.134
MoStek® Ø#3–#5 Tapered® small 2”
44,09 lbs
100
®
®
MOLENAAR NORTH AMERICA INC.
®
®
PRODUCT PICTURE
09
1
CONCRETE SPACERS
1.3 SPACERS WITH WIRE
These concrete spacers with wire are fixed on the rebar with a galvanized steel wire.
On request available with long wires (≥ 51/8 ”).
Tip: Place the spacers in a bucket of water before using. Wet spacers improve concrete bonding.
TRIO ® WITH WIRE
The advantages of flat- and round-headed versions are combined in a single model called “the Trio®.” The Trio has the invisibility of the round-headed model and at least the stability of a flat-headed model. Because of its three feet it is more stable on rough
surfaces. The three rounded feet ensure that they are nearly invisible, the precision-engineered curves ensure that even high-density
concrete can flow under the Trio spacer to produce a smooth result.
Art.no.
Description
Wt./pkg Pc./pack
US.110.034
Trio with wire ¾”
48,50 lbs
468
US.110.100
Trio® with wire 1”
50,71 lbs
360
US.110.114
Trio with wire 1¼”
48,50 lbs
288
US.110.112
Trio® with wire 1½”
46,30 lbs
180
US.110.134
Trio with wire 1¾”
44,09 lbs
144
US.110.200
Trio® with wire 2”
50,71 lbs
144
US.110.214
Trio with wire ¼”
41,89 lbs
108
US.110.212
Trio® with wire 2½”
50,71 lbs
108
US.110.234
Trio® with wire 2¾”
40,79 lbs
72
US.110.300
Trio with wire 3"
41,89 lbs
72
®
®
®
®
®
PRODUCT PICTURE
FLAT WITH WIRE
10
Art.no.
Description
Wt./pkg Pc./pack
US.100.034
Flat with wire ¾”
39,68 lbs
510
US.100.100
Flat with wire 1”
44,09 lbs
510
US.100.114
Flat with wire 1¼”
50,71 lbs
410
US.100.112
Flat with wire 1½”
50,71 lbs
350
US.100.134
Flat with wire 1¾”
44,09 lbs
175
US.100.200
Flat with wire 2”
46,30 lbs
175
US.100.212
Flat with wire 2½”
33,07 lbs
40
US.100.234
Flat with wire 2¾“
46,30 lbs
40
US.100.300
Flat with wire 3”
49,38 lbs
40
PRODUCT PICTURE
CATALOG
CONCRETE SPACERS
1
SPACERS WITH WIRE 1.3
TAPERED ® WITH WIRE
These spacers are used on heavy reinforcement and where the soil requires it.
Art.no.
Description
Wt./pkg Pc./pack
US.500.034
Tapered® small with wire ¾”
50,71 lbs
285
US.500.100
Tapered® small with wire 1”
46,30 lbs
210
US.500.114
Tapered small with wire 1¼”
48,50 lbs
175
US.500.112
Tapered® small with wire 1½”
48,50 lbs
140
US.500.200
Tapered small with wire 2”
44,09 lbs
100
Art.no.
Description
Wt./pkg Pc./pack
US.510.034
Tapered® medium with wire ¾”
50,71 lbs
285
US.510.100
Tapered® medium with wire 1”
46.30 lbs
210
US.510.114
Tapered medium with wire 1¼”
48.50 lbs
175
US.510.112
Tapered® medium with wire 1½”
48.50 lbs
140
US.510.134
Tapered medium with wire 2”
44.09 lbs
100
US.510.200
Tapered® medium with wire 1½”
48.50 lbs
140
US.510.212
Tapered medium with wire 2”
44.09 lbs
100
Art.no.
Description
Wt./pkg Pc./pack
US.520.200
Tapered® big with wire 2”
44,09 lbs
23
US.520.234
Tapered® big with wire 2 ¾”
46,30 lbs
16
US.520.300
Tapered big with wire 3”
41,89 lbs
16
US.520.325
Tapered® big with wire 3 ¼”
48,50 lbs
16
US.520.400
Tapered big with wire 4”
44,09 lbs
12
PRODUCT PICTURE
Small
®
®
PRODUCT PICTURE
Medium
®
®
®
PRODUCT PICTURE
Big
®
®
MOWIP®
PRODUCT PICTURE
The MoWip® is especially developed to center reinforcement cages in
pillar tubes. They are also suitable for keeping a Tube form on the correct
cover. Recommended usage is three MoWips® per level with a minimum of
two levels per pillar. Levels should be 6 to 9 ft apart.
Art.no.
Description
US.550.200
MoWip® 2”
MOLENAAR NORTH AMERICA INC.
Wt./pkg Pc./pack
850,54 lbs
364
11
1
CONCRETE SPACERS
1.4 SPACERS FOR SELF CONSOLIDATING CONCRETE
The spacers in this assortment are made for use in self-consolidating concrete (SCC). Applicability and specifications are indicated
for each product.
MONOCLIP®
FOR REBAR SIZE Ø #2 – #5
The MoNoClip® is a patented innovation from Molenaar Betonindustrie B.V. The MoNoClip® is designed for Self-Compacting
Concrete (SCC). As the SCC is poured, the MoNoClip® lifts up through its unique trumpet shape with a round point on the formwork side. A thin layer of cement water can then flow under the MoNoClip® so that the MoNoClip® is completely covered. Your product
now has a perfectly smooth surface containing high-quality spacers. This ensures that your product is made with the highest standards.
PRODUCT PICTURE
Tip: Place the spacers in a bucket of water before using.
Wet spacers improve concrete bonding.
Art.no.
Description
Wt./pkg Pc./pack
US.122.100
MoNoClip 1”
50,70 lbs
432
US.122.114
MoNoClip® 1¼”
46,29 lbs
396
US.122.200
MoNoClip 2”
48,50 lbs
180
®
®
PRODUCT PICTURE
MONOCLIP® #5+
FOR REBAR SIZE Ø #5 – #8
Art.no.
Description
Wt./pkg Pc./pack
US.123.100
MoNoClip® #5+ 1”
50,70 lbs
432
US.123.114
MoNoClip #5+ 1¼”
46,29 lbs
396
US.123.200
MoNoClip® #5+ 2”
48,50 lbs
180
®
PRODUCT PICTURE
MONOSTEK®
FOR REBAR SIZE Ø #1 – #2
Art.no.
Description
Wt./pkg Pc./pack
US.124.100
MoNoStek Ø#1–#2 1”
50,70 lbs
432
US.124.114
MoNoStek® Ø#1–#2 1¼”
46,29 lbs
396
US.124.200
MoNoStek Ø#1–#2 2”
48,50 lbs
180
®
®
PRODUCT PICTURE
MONOSTEK®
12
FOR REBAR SIZE Ø #3 – #5
Art.no.
Description
Wt./pkg Pc./pack
US.125.100
MoNoStek Ø#3–#5 1”
50,70 lbs
432
US.125.114
MoNoStek® Ø#3–#5 1¼”
46,29 lbs
396
US.125.200
MoNoStek Ø#3–#5 2”
48,50 lbs
180
®
®
CATALOG
CONCRETE SPACERS
1
BAR SUPPORTS 1.5
A-TYPE
The Hollow concrete spacer is applied without fixing it to the rebar. The hole on the top of the spacer ensures the cover.
Art.no.
Description
Wt./pkg Pc./pack
US.170.034
A-Type ¾”
44,09 lbs
510
US.170.100
A-Type 1”
39,68 lbs
255
US.170.114
A-Type 1¼”
50,71 lbs
250
US.170.112
A-Type 1½”
44,09 lbs
180
US.170.114
A-Type 1¾”
35,27 lbs
125
US.170.200
A-Type 2”
39,68 lbs
94
PRODUCT PICTURE
L-TYPE ®
The L-Type® II concrete nail spacer is nailed to wooden forms. This spacer is used primarily on wall forms and sloping surfaces.
The L-Type® II is nailed to the formwork through the hole in the lower part with a stainless steel nail. The rebar is placed on the upper
part of the spacer and secured with a tie wire through the tie wire hole. The distance between the nail and the reinforcement prevent a
corrosive connection.
Art.no.
Description
Wt./pkg Pc./pack
US.560.114
L-Type® 1¼”
50,71 lbs
216
US.561.112
L-Type® II 1½”
46,30 lbs
189
US.561.200
L-Type® II 2”
46,30 lbs
144
US.560.234
L-Type II 2¾”
50,71 lbs
60
®
PRODUCT PICTURE
MOBET®
The MoBet® is a handy spacer for horizontal use, made of construction
concrete. The MoBet® is packaged in bags up to 23 kg. Recommended usage is four spacers per m2.
Art.no.
Description
Wt./pkg Pc./pack
US.530.114
MoBet 1¼”
50,71 lbs
81
US.530.112
MoBet® 1½”
50,71 lbs
62
US.530.200
MoBet® 2”
50,71 lbs
49
®
PRODUCT PICTURE
MOBLOK ®
The MoBlok® spacers are used on heavy reinforcement and where the
PRODUCT PICTURE
soil requires it.
Art.no.
Description
Wt./pkg Pc./pack
US.576.030
MoBlok 1¼”
46,30 lbs
33
US.576.035
MoBlok® 1½”
46,30 lbs
24
US.576.040
MoBlok 1¾”
48,50 lbs
22
US.576.045
MoBlok® 2¼”
48,50 lbs
18
®
®
MOLENAAR NORTH AMERICA INC.
13
1
CONCRETE SPACERS
1.5 BAR SUPPORTS
TAPERED
The Tapered spacers are used on heavy reinforcement and where the soil requires it.
Art.no.
Description
Wt./pkg Pc./pack
US.506.034
Tapered small ¾”
46,30 lbs
285
US.506.100
Tapered small 1”
46,30 lbs
210
US.506.114
Tapered small 1¼”
48,50 lbs
175
US.506.112
Tapered small 1½”
48,50 lbs
140
US.506.200
Tapered small 2”
44,09 lbs
100
Art.no.
Description
Wt./pkg Pc./pack
US.516.034
Tapered medium ¾”
41,89 lbs
140
US.516.100
Tapered medium 1”
44,09 lbs
116
US.516.114
Tapered medium 1¼”
44,09 lbs
80
US.516.112
Tapered medium 1½”
48,50 lbs
80
US.516.134
Tapered medium 1¾”
44,09 lbs
60
US.516.200
Tapered medium 2”
46,30 lbs
53
US.516.212
Tapered medium 2½”
41,89 lbs
40
Art.no.
Description
Wt./pkg Pc./pack
US.526.200
Tapered big 2”
46,30 lbs
285
US.526.234
Tapered big 2¾”
46,30 lbs
210
US.526.300
Tapered big 3”
48,50 lbs
175
US.526.325
Tapered big 3¼”
48,50 lbs
140
US.526.400
Tapered big 4”
44,09 lbs
100
PRODUCT PICTURE
Small
PRODUCT PICTURE
Medium
PRODUCT PICTURE
Big
14
CATALOG
CONCRETE SPACERS
1
SLAB BOLSTERS 1.6
MORIB ®
The MoRib® is used for heavy mesh and rebar. The MoRib® is placed in a
PRODUCT PICTURE
staggered pattern on the working floor. This prevents the rebar from falling
off of the MoRib® onto the ground. This also prevents cracking. The MoRib® is
made of construction concrete, making the MoRib® suitable for use in waterproof construction.
Art.no.
Description
Wt./pkg Pc./pack
US.531.200
MoRib 2”
30,64 lbs
8
US.531.234
MoRib® 2¾”
28,66 lbs
6
®
THE ADVANTAGES OF THE MOSWING®:
THE ADVANTAGES OF CONCRETE SPACERS:
• Optimum adhesion • Maintaining of the
• Minimum water
absorption
• No deformation,
material integrity
• Holds more weight
• Nearly invisible
cover guaranteed
• Cost effective
• Colored concrete possible
• Use is 1 till 2 per 9 ft2
MOSWING ®
PRODUCT PICTURE
The MoSwing® is a specially developed spacer. The MoSwing® is widely
used in bridges, tunnels and other heavy construction.
We recommend two spacers per square meter.
Art.no.
Description
US.540.200
MoSwing® 2”
US.540.234
MoSwing 2¾”
®
Wt./pkg Pc./pack
729,73 lbs
207
1014,13 lbs
207
PRODUCT PICTURE
½ MOSWING ®
Art.no.
Description
US.545.200
½ MoSwing 2”
US.545.234
½ MoSwing® 2¾”
®
Wt./pkg Pc./pack
705,48 lbs
400
1065,27 lbs
400
PRODUCT PICTURE
MOSWING ® WITH WIRE
Art.no.
Description
US.541.200
MoSwing with wire 2”
US.541.234
MoSwing® with wire 2¾”
®
Wt./pkg Pc./pack
729,73 lbs
207
1014,13 lbs
207
PRODUCT PICTURE
½ MOSWING ® WITH WIRE
Art.no.
Description
US.546.200
½ MoSwing with wire 2”
705,48 lbs
400
US.546.234
½ MoSwing® with wire 2¾” 1065,27 lbs
400
®
MOLENAAR NORTH AMERICA INC.
Wt./pkg Pc./pack
15
2
FORMWORK SPACERS
2.1 DYWIDAG SYSTEM PRODUCTS
Dywidag system products are made to fit the Dywidag Tie bars, or other Dywidag products.
MOPLUS ® CENTER CONE
The MoPlus® Center cone is a highly developed concrete centering cone made of
PRODUCT PICTURE
construction concrete.
This makes the MoPlus® Center cone suitable for exposed concrete, as the MoPlus Center cone
is nearly invisible. The MoPlus® Center cone can also be produced with colored concrete. The
concrete increases the quality of the cone, making the cone suitable for durable projects. The
available working loads are 75kN and 90kN. These strengths are attainable only when the tie
rod has the same or higher working load and is screwed in completely, and when the tie bar
has not been spun. The size of the lost tie bar would be the wall size – 2 times the X size.
A filling cone for the hole is also available.
MOPLUS ® CENTER CONE
Art.no.
75KN
Description
X size
Wt./pkg.
pc./pack
PRODUCT PICTURE
75kN
US.8.311.112.075.000
MoPlus® Center cone 75kN 1 1/2”
3 3/8”
2.43 lbs
1
US.8.311.200.075.000
MoPlus® Center cone 75kN 2”
3 3/4”
2.87 lbs
1
US.8.311.234.075.000
MoPlus® Center cone 75kN 2 3/4”
4 9/16”
3.75 lbs
1
X size
Wt./pkg.
pc./pack
MOPLUS ® CENTER CONE
Art.no.
90KN
Description
90kN
US.8.311.112.090.000
MoPlus® Center cone 90kN 1 1/2”
US.8.311.200.090.000
MoPlus® Center cone 90kN 2”
US.8.311.234.090.000
MoPlus® Center cone 90kN 2 3/4”
4 15/16”
2.65 lbs
1
4 5/16”
3.09 lbs
1
5 1/8”
3.97 lbs
1
CONCRETE PLUG
PRODUCT PICTURE
Concrete plugs are used to fill the hole of a removed plastic cone like a SK, DR, or snap
tie hole cones. The plugs are glued into the holes with MoVast®.
Holes for all types of cone must be treated as follows to place a concrete plug:
• Clean the holes.
• Coat the holes or plugs with MoVast® cement bound adhesive (wear gloves).
• Insert the plug into the hole with a rotating movement.
Art.no.
Description
X size
Wt./pkg.
US.265.110
DR-22 concrete plug 1/4” recessed
44.09 lbs
2.65 lbs
pc./pack
660
Other sizes available on request.
16
CATALOG
FORMWORK SPACERS
2
WALL AND TUNNELING CONSTRUCTION PRODUCTS 2.2
Wall and tunneling construction products are used in the construction of concrete housing and high-rise buildings.
KICKER BLOCKS FOR TUNNEL SYSTEM FORMWORK
Kicker blocks are used for continuous wall and floor constructions. These allow a faster pouring to be made, the following wall
to be installed more quickly and provide good kicker in the floor. The following standard variants are available:
• Cross blocks for a partition wall.
• T-blocks for an end wall or cavity wall.
• Corner blocks for an uppermost end wall or cavity wall.
• Top blocks for the uppermost partition.
Cross blocks and T-blocks are provided with slots to accommodate the reinforcement. The most common sizes are available from stock.
Cross blocks can also be produced with openings for sockets, or with a chine anchor complete with wire end and plastic caps or pouring
cone for the positioning of the following wall. Versions with a staggered upper wall and/or floor are also possible.
For more information, please contact us at [email protected]
PRODUCT PICTURE
CROSS BLOCK
MOLENAAR NORTH AMERICA INC.
T-BLOCK
CORNER BLOCK
TOP BLOCK
17
2
FORMWORK SPACERS
2.2 WALL AND TUNNELING CONSTRUCTION PRODUCTS
KICKER BLOCKS MODEL A
The Kicker block model A is an easy block for fixing the correct position of the kicker. The Kicker block model A is adjustable by
means of a slotted hole.
Before use, please cast in a stud bolt into the floor to fasten the block with. Model A, can be supplied with and without pinhole. Other
dimensions are available on request. Items supplied will have the stated wall dimensions minus 1/12”.
Art.no.
Description
Wt. / pkg.
pc. / pack
US.350.600
Kicker block model A Wall 6”
1746.86 lbs
350
US.350.700
Kicker block model A Wall 7”
1913.61 lbs
325
US.350.758
Kicker block model A Wall 7 5/8”
1933.45 lbs
300
US.350.800
Kicker block model A Wall 8”
2034.87 lbs
300
US.350.900
Kicker block model A Wall 9”
1768.11 lbs
230
US.351.000
Kicker block model A Wall 10”
1803.38 lbs
210
US.351.100
Kicker block model A Wall 11”
1898.18 lbs
200
US.351.158
Kicker block model A Wall 11 5/8”
1911.41 lbs
190
US.351.200
Kicker block model A Wall 12”
1975.34 lbs
190
PRODUCT PICTURE
Other sizes available on request.
PLASTIC CONE
The plastic cone ensures the tie bar remains clean and reusable.
After removing the forms, the plastic cone can be punched out and the hole can be filled with a concrete cone, MoBikon or MoStopper.
THE ADVANTAGES OF THE PLASTIC CONE:
• Reusable
• S uitable for the Concrete cone D, MoBikon® and MoStopper®
• Easy to use
• Saves on labor costs
Please note: Usage of the correct plastic cone is crucial. Minor size variations in the plastic cone result in unacceptable deviations of the
hole for the concrete cone. For example, if the cone is too deep in the hole, it will stick out. Angle of inclination is 11°5.
Art.no.
Description
US.9.120.000.000.600
Plastic cone wall 6”
Wt. / pkg.
pc. / pack
0.37 lbs
1
US.9.120.000.000.700
Plastic cone wall 7”
0.44 lbs
1
US.9.120.000.000.758
Plastic cone wall 7 5/8”
0.44 lbs
1
US.9.120.000.000.800
Plastic cone wall 8”
0.49 lbs
1
US.9.120.000.000.900
Plastic cone wall 9”
0.49 lbs
1
US.9.120.000.001.000
Plastic cone wall 10”
0.57 lbs
1
US.9.120.000.001.100
Plastic cone wall 11”
0.57 lbs
1
US.9.120.000.001.158
Plastic cone wall 11 5/8”
0.62 lbs
1
PRODUCT PICTURE
Other sizes available on request.
18
CATALOG
FORMWORK SPACERS
2
WALL AND TUNNELING CONSTRUCTION PRODUCTS 2.2
CONE REMOVAL PEN
Handy tool to remove the plastic cones. Different models available.
For walls over 250mm or 10” thick, use the longer device. We also offer a removal device for
dilatation walls.
Art.no.
Description
Wt./pkg.
pc./ pack
US.9.129.000.000.001
Cone removal pen
4.41 lbs
1
US.9.129.000.000.004
Cone removal pen walls 11”/250mm+
4.41 lbs
1
US.9.129.000.000.002
Cone removal pen for cavity walls
17.90 lbs
1
PRODUCT PICTURE
CONCRETE CONE D
When a plastic cone is used as tie bar feed-through (see plastic cone), the hole can be
filled with this cone. The concrete cone must be glued in with dispersion glue.
THE ADVANTAGES OF THE CONE D:
• Maximum sealing
• Easy to use
• Minimum noise leakage
• Saves on labor costs
• Fire resistant
Art.no.
Description
Wt./pkg.
pc./pack
US.200.600
Concrete cone wall 6”
28.11 lbs
24
US.200.700
Concrete cone wall 7”
33.07 lbs
24
US.200.758
Concrete cone wall 75/8”
34.83 lbs
24
US.200.800
Concrete cone wall 8”
36.49 lbs
24
US.200.900
Concrete cone wall 9”
39.35 lbs
24
US.201.000
Concrete cone wall 10”
45.86 lbs
24
PRODUCT PICTURE
Other sizes available on request.
MOLENAAR NORTH AMERICA INC.
19
2
FORMWORK SPACERS
2.2 WALL AND TUNNELING CONSTRUCTION PRODUCTS
MOBIKON ®
When a plastic cone is used (see plastic cone), the hole can be filled with MoBikon®.
The MoBikon® is placed in the hole in the wall so that it will stick out 1 or 2 cm, as it is oversized. Then the extended part can be
hammered in. The pressure of the surrounding concrete will cause the outside of the MoBikon® to collapse and the cork parts to be
compressed. The elasticity of the cork will expand the cone, which can then be permanently clamped. Protruding parts can simply be
broken off, if necessary, with a hammer. The MoBikon® is being used successfully in many construction sites. The MoBikon® must be
placed as soon as possible after removal from forms. Some release agents may have a negative effect on the hardening process.
THE ADVANTAGES OF THE MOBIKON:
• Maximum sealing
• Easy to use
• Fire resistant
• Minimum noise leakage
• Saves on labor costs
• No glue required
• Light weight
Art.no.
Description
Wt./pkg.
pc./pack
US.250.600
MoBikon wall 6”
21.08 lbs
24
US.250.700
MoBikon wall 7”
24.80 lbs
24
US.250.758
MoBikon wall 75/8”
26.12 lbs
24
US.250.800
MoBikon wall 8”
27.36 lbs
24
US.250.900
®
MoBikon wall 9”
29.52 lbs
24
US.251.000
MoBikon® wall 10”
34.39 lbs
24
US.251.100
MoBikon® wall 11”
35.05 lbs
24
®
®
®
®
PRODUCT PICTURE
Other sizes available on request.
MOSTOPPER ®
The MoStopper® concrete cone is suitable for applications in construction holes, for which the concrete product must be
waterproof. The hole created with the plastic cone is easy to fill with a prefabricated concrete cone of our own manufacture. The
MoStopper® concrete cone is simple to secure in the hole with MoVast® cement glue; in this way it is easy to glue a waterproof seal.
The MoStopper® has been used successfully in a variety of construction sites.
THE ADVANTAGES OF THE MOSTOPPER:
• Liquid proof (Glued with MoVast® cement glue)
• Easy to use
• Saves on labor costs
• Fire resistant
Art.no.
Description
Wt./pkg.
pc./pack
US.210.600
MoStopper® wall 6”
28.11 lbs
24
US.210.700
MoStopper® wall 7”
36.49 lbs
24
US.210.800
MoStopper wall 8”
36.49 lbs
24
US.210.900
MoStopper wall 9”
45.86 lbs
24
US.211.000
MoStopper wall 10”
45.86 lbs
24
®
®
®
PRODUCT PICTURE
Other sizes available on request.
20
CATALOG
FORMWORK SPACERS
2
GLUE
2.3
MOLENAAR DISPERSION GLUE
Molenaar Dispersion glue Nr.1 ensures optimum adhesion of the concrete cones.
It is ready to use, packaged in 14 kg buckets. Approximately 40 kilograms of Molenaar Dispersion glue can cover a thousand cones,
depending on the length of the cones.
PRODUCT PICTURE
THE ADVANTAGES OF THE DISPERSION GLUE:
• Temperature resistant. The glue begins
• S trong resistance to diluted acids, but
not to concentrated acids.
to soften at 122-140°F.
• Storage life is several years. Make sure
the bucket is properly sealed after use.
• Processing time is approximately 20
to 30 minutes, maximum strength is
• Excellent alkali resistance.
• S uitable for gluing polystyrene foam.
•U
se: with 1 bucket approximately 350
cones can be glued.
reached in 28 days.
Art.no.
Description
Wt./pkg.
pc./pack
9.900.001.000.014
Molenaar dispersion glue
30.86 lbs
1
MOVAST® CEMENT GLUE
This adhesive is intended to be used for building applications in which the concrete construction may or may not need to be
waterproof. The conical hole created for the plastic cone is easy to fill with a prefabricated concrete cone of our own manufacture.
The concrete cone is simply secured in the hole with our MoVast® cement glue, resulting in a well finished seal.
PRODUCT PICTURE
THE ADVANTAGES OF THE CEMENT GLUE:
• Liquid proof (in combination with
the MoStopper )
•A
dhesive and sealant in one
•G
rey color
®
• F ire resistant
•U
se: with 1 bucket approximately 288
• F rost resistant
cones can be glued.
Art.no.
Description
Wt./pkg.
pc./pack
9.900.000.000.015
MoVast Grey
33.07 lbs
1
MOLENAAR NORTH AMERICA INC.
®
21
NOTES
22
CATALOG
NOTES
MOLENAAR NORTH AMERICA INC.
23
Marketleader in
engineered
concrete spacers!
WWW.MOLENAAR-AMERICAS.COM
MOLENAAR NORTH AMERICA INC.
3625 Greenside Court
Dacula, GA 30019
United States of America
t: 404 493 7628
e:[email protected]