Controller and power supply units

Controller and power
supply units
The Digiline gauges can be powered by the
power supplies of the HiPace turbopumps,
which drive up to 16 gauges. The control unit
DGP 202 can drive up to two gauges and
features a display to readout the pressure data
of the two measuring channels.
Measurement & Analysis / Measurement / DigiLine
DPG 202, Controller and power supply unit for up to 2
Controller with integrated power supply for max. two DigiLine gauges
LCD graphic display, backlit
2 two-way contacts
Similar Image
Technical Data
DPG 202, Controller and power supply unit
for up to 2 gauges
Connection for gauge
Dimensions w x h x d
Display rate
Mains requirement: frequency (range)
Mains requirement: voltage (range)
Measurement rate
Power consumption
Protection category
Set point: Changeover contact, potential-free
Set point: Voltage max.
Temperature: Operating
Temperature: Storage
Unit of measure
(19 mm | (0.75 inch
LCD, backlit
2 Hz
50/60 Hz
95-265 V AC
10 Hz
max. 25 (gauges included) W
IP 20
2 pieces
250 V AC, 4 A; 45 V DC, 2 A
5-50 °C | 41-122 °F | 278-323 K
-20-60 °C | -4-140 °F | 253-333 K
mbar, bar, Pa, hPa, mTorr, Torr
0.75 kg | 1.65 lb
Order number
Controller and power supply units
PT G12 020
Page 2
Measurement & Analysis / Measurement / DigiLine
Adapter and power switching components
M12 m plug 4-pole with screw terminals RS-485
Interface and extension cables
Interface cable, M12 m straight / M12 m
straight, 3 m
Mains- and supply cables
Mains cable, Swiss plug, 2.5 m
Mains cable, U.K. plug, 2.5 m
Mains cables
Mains cable 115 V AC, NEMA 5-15 to C13, 3 m
Mains cable 230 V AC, CEE 7/7 to C13, 3 m
Connector M12 to RS-485
Termination Resistor for RS-485
Y-Connector M12 to RS-485
Soft- and Firmware
Software DokuStar, 2 channels
PT 348 106 -T
PM 061 283 -T
P 4564 309 YR
P 4564 309 Y1
P 4564 309 ZE
P 4564 309 ZA
PM 061 270 -X
PT 348 105 -T
P 4723 010
PT 882 500
Page 3
Pfeiffer Vacuum stands for innovative and custom
vacuum solutions worldwide, technological perfection,
competent advice and reliable service.
Complete range
of products
From a single component to complex systems:
We are the only supplier of vacuum technology
that provides a complete product portfolio.
Competence in
theory and practice
Benefit from our know-how and our portfolio of training
opportunities! We support you with your plant layout
and provide first-class on-site service worldwide.
Are you looking for a
perfect vacuum solution?
Please contact us:
Pfeiffer Vacuum GmbH
Headquarters · Germany
T +49 6441 802-0
[email protected]
All data subject to change without prior notice. (12/22/2014)
Vacuum solutions
from a single source