Evaluative Report of Mechanical & Automobile Engineering Department 1. Name of the Department: Department of Mechanical & Automobile Engineering. 2. Year of Establishment: Mechanical Engineering (2004) & Automobile Engineering (2013) 3. Names of Programmes /Courses offered (UG, PG, M. Phil., Ph.D., Integrated Masters; Integrated Ph.D., etc.): Program B.Tech in Mechanical Engineering B.Tech in Automobile Engineering M.Tech.in Mechanical Engineering Duration Year of start 4 years 4 years 2 years 2004 2013 2013 4. Names of Interdisciplinary courses and the departments/units involve: a) Courses/Subjects: S. No. Names of Interdisciplinary courses/Subjects Departments involved 1 Fundamental of computer programming and Information Technology Basics of electrical and electronics engineering CSE /IT Department 2 Electrical Engg. Department 5. Annual/semester/choice based credit system (programme wise): Semester based credit system 6. Participation of the department in the courses offered by other departments: S. No. Programs offered by other departments Participation of ME Department 1 B.Tech CSE/IT 2 B.Tech ECE Teaching Subjects namely ‘Elements of Mechanical Engineering, 3 B.Tech EE Engineering Drawing and Computer Graphics’. 4 B.Tech Civil 5 B.Tech ELCE 6 B Tech EE Teaching subject ‘Power plant engineering’ 7. Courses in collaboration with other universities, industries, foreign institutions etc: S. No. 1 Course Names Industrial Contribution (if any) CAD/CAM Department of ME has set up a "SIEMENS Centre of Excellence" at the premises of CTIEMT. Training on SOLID EDGE software is provided to excel the students in the field of designing. 8. Details of courses/programmes discontinued (if any) with reasons: NIL 9. Number of teaching posts: Sanctioned Filled Professors 05 03 Associate Professors 07 00 23 32 Asst. Professors 10. Faculty profile with name, qualification, designation, specialization,(D.Sc./D.Litt./Ph.D./M. Phil .etc.): Sr. No. Name Qualification Designati on Specialization No. of Years of Exp. 1 Dr. Sumit Jain Ph.D Professor 2 Dr. Gurudutt Sahni Dr. P.C. Maity Dr. Mandeep Kaur Dr. Amandeep Bains Mr. Rahul Joshi Mr. Harjit Singh Mr. Jatinder Kumar Mr. Amandeep Singh Mr. Harpreet Singh Mr. Anuraj Singh Mr. Satbir Singh Saini Mr. Punit Sarwal Mr. Manpreet Singh Mr. Sanjeev Kumar Mr. Gurpreet Singh Mr. Mandeep Singh Mr. Varinder Singh Mr. Vikas Kumar Ph.D Professor Industrial/Product ion Mechanical Ph.D Ph.D, M.Sc (Chem), B.Sc Ph.D ( Physics) Ph.D (pursuing) Ph.D (pursuing) Ph.D (pursuing) M. Tech Professor Assistant Professor Assistant Professor Assistant Professor Assistant Professor Assistant Professor Assistant Professor Assistant Professor Assistant Professor Assistant Professor Assistant Professor Assistant Professor Assistant Professor Assistant Professor Assistant Professor Assistant Professor Assistant Professor 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 M. Tech M. Tech M. Tech M. S M. Tech M. Tech M. Tech Ph.D (pursuing) Ph.D (pursuing) M. Tech Nature of employment 10 No. of Ph.D. students guided in the last 4 years Nil 14 Nil Permanent Mechanical chemistry 35 1 Nil Nil Permanent Permanent Physics(on study Leave) Production 5 Nil Permanent 14 N/A Permanent Industrial 11 N/A Permanent Production 10 N/A Permanent Mechanical 4.5 N/A Permanent Mechanical 9.5 N/A Permanent Manufacturing 4 N/A Permanent Production 6 N/A Permanent Production 3 N/A Permanent Production 5.5 N/A Permanent Production 4.5 N/A Permanent CAD/CAM 1 N/A Permanent Mechanical 1 N/A Permanent Thermal 4 N/A Permanent CAD/CAM 8 N/A Permanent Permanent 20 Mr. Mandeep Kumar Mr. Harpreet Singh Bedi Mr. Amanpreet Singh Mr. Vikram Singh Jamwal Mr. Palwinder Singh Ms. Jaskiran Kaur Ms. Rashmi 21 22 23 24 25 26 27 Mr. Akashdeep Goel Mrs. Jasmeen Kaur 28 M. Tech M. Tech M. E M. E. M.Phil, M.Sc. (Maths) MBA M.Sc ,B.Ed, (Maths) M. Tech Assistant Professor Assistant Professor Assistant Professor Manufacturing 1 N/A Permanent Mechanical 1 N/A Permanent Thermal 3 N/A Permanent Assistant Professor Assistant Professor Assistant Professor Assistant Professor Assistant Professor Thermal 2 N/A Permanent Pure Mathematics 9 N/A Permanent Communication Skills Pure Mathematics 2 N/A Permanent 2 N/A Permanent Mechanical 5 N/A Temporary M. Tech Assistant Professor Mechanical 5 N/A Temporary 29 Mr. Rupinder Singh M. Tech Assistant Professor Production 5.5 N/A Temporary 30 Mr. Amninder Singh M. Tech Assistant Professor Production 2 N/A Temporary 31 Mr. Harkirat Singh M. Tech Assistant Professor Mechanical (Welding) 2 N/A Temporary 32 Mr. Surinder Singh M. Tech Assistant Professor Production 5.5 N/A Temporary 33 Mr. Harjaskirat Singh Ms. Rimple M. Tech Assistant Professor Production 1 N/A Temporary M.Phil, M.Sc.(Maths) Assistant Professor Pure Mathematics 9 N/A Temporary M.Sc. (Chem.) Assistant Professor Inorganic Chemistry 3 N/A Temporary 34 35 Ms. Binu Bhanot 11. List of senior visiting faculty: Year 2015 S.No. Name of visiting faculty Organization Designation 1 Dr. Ranjit Singh BCET, Gurdaspur Associate Professor 2 Dr. R.K. Garg NIT, Jalandhar Professor Vendors Work Profile Cutting Edge, Jalandhar Aptitude Trainer Year 2014 S.No. Name of visiting faculty 1 Ms. Priyanka 2 Mr. Akash Winstar Institute of Management & Technology,Jalandhar. Aptitude Trainer 3 Mr. Simerjit Singh Aspiring Mind,New Delhi Motivational Speaker 4 Mr. V K Khurana Ralson Tyres, Ludhiana. HR Vendors Work Profile Year 2013 S.No. Name of visiting faculty 1 Mr. Vamsi Career Cafe, Jalandhar Aptitude Trainer 2 Mr. KJS Pannu Milestone 9,Jalandhar Soft Skill Mr. Amit Xmplar Management solutions Pvt. Ltd. Noida Soft Skill Ms. Parul Verma Cynosure Soft skill S.No. Name of visiting faculty Vendors Work Profile 1 Prof Jagdev Singh Bhabha Atomic Research Centre, Mumbai. Scientist 2 Col Pushpinder Sassy Puma Solutions, Panchkula. CEO 3 4 Year 2012 12. Percentage of lectures delivered and practical classes handled (programme-wise) by temporary faculty: 25.71% 13. Student-Teacher Ratio (programme-wise): B. Tech (ME & AUE) =1: 14.60 M Tech. (Mechanical Engg.) = 1:4.5 14. Number of academic support staff (technical) and administrative staff; sanctioned and filled: List of Non- Teaching Staff Sanctioned Filled Technical 08 08 Administrative 43 43 (shared) Qualification details of Technical Supporting Staff: S. No 1 2 3 4 5 Name of Supporting Staff (Technical) Mr. Iqbal Singh Mr. Rohit Kumar Mr. Vijay Kumar Mr. Shadi Lal Mr. Navdeep Qualification Experience B.Tech in Mechanical Engineering Diploma in Mechanical Engineering Diploma in Mechanical Engineering Diploma in Mechanical Engineering B.Tech in Mechanical Engineering 7 years 13 years 4 years 6 years 3.5 years 6 7 Naveen Kaushik Mr. Sanjeet Kumar Minhas 8 Mr. Jai Gurdip List of administrative staff: Sr. No. 1 Name Mr. Sukdev Singh 3 4 5 6 7 8 9 Mr. Puneet Malhotra Ms. Pawanpreet Kaur Ms. Kiran Sharma Ms. Neetu Sharma Mr. Joginder Singh Mr. Naresh Kumar Mr. Sandeep Rai Mr. Manoj Kumar 10 11 12 Mr. Rakesh Kumar Mr. Abhishek Soni Ms. Rajinder Kaur 13 24 25 26 27 28 Mr. Vishav Kapoor Mr. RajKumar Nahar Mr. Arpinder Singh Mr. Sukhninder Singh Mr. Vijay Kumar Verma Mr. Joga Singh Mr. Jagdish K Chander Mr. Tarsem Lal Mr. Tarlochan Singh Ms. Monika Chhabra Mr. Pankaj Vij Ms. Anuradha Handa Mr. Amit Kumar Ms. Tripti Gandhi Ms.Dipinti Gill Mr. Ankit Mehra 29 Mr. Deepak Sharma 2 14 15 16 17 18 19 20 21 22 23 Designation AO B.Tech in CSE Diploma in Mechanical Engineering, CAD/CAM Diploma in Mechanical Engineering Department/ Section Admin 1 year 12 year 4 months 1 year 10 month UG PG B.A., Diploma in Computers, Dip. In Accounts & Mgt M.A. (Pol. Sc.) Clerk Admin Office Executive Receptionist Receptionist Field Officer Accounts Officer Cashier Accountant Admin Admin Admin Admin Accounts Accounts Accounts Accounts Assistant Dy. Director CCPC Executive LEC. & Manager Industry Interface Accounts CCPC CCPC B.A B.A.& B.Ed. BA 10th B.Com 10+2 B.Com Dip in Comp. Accountant, B.A BA, PGDCM BCA CCPC B.Tech Sanitary Supervisor Purchase Officer Civil Wing Civil Wing BA 10+2 Maintenance Incharge Civil Wing Under Graduate Sr. Civil Engineer Civil Supervisor Civil Wing Civil Wing Dip. In Civil Engg. Graduate Store Officer Electrical Supervisor Civil Wing Civil Wing Dy. Estate Officer Civil Wing BA BA Graduation (Military), FSC A.P. Project officer Counseling Counseling BCA Hostel warden Hostel Supdt. HR Coordinator Operation Executive Office Executive Hostel Hostel HR HR HR International Affairs B.A. 10+2 B.Sc. (Eco.) B.com BCA MBA M.com MCA B.Pharmacy MBA Director M.Sc M.com MBA MCA M.Tech & MBA (Pursuing) MBA MBA 30 31 Ms. Meenu Dhall Ms. Aarti Sharma Assistant Librarian Library Assistant Library Library 32 Ms. Sarabjit Kaur Ms. Poonam Virmani Library Restorer Library Librarian Library Assistant Librarian DPE Gym Instructor Office Executive Asst. Registrar Library Sports Sports Student Section Student Section BA, B. Lib. BA 10+2 B.A. B.A B.Ed Clerk Transport officer Transport Asst. Security supervisor Office Executive Student Section Transport Transport Transport Transport B.A. Diploma & B.A. 33 34 35 36 37 38 39 40 41 42 43 Ms. Anu Bala Mr. Satpal Mr. Ravi Kumar Ms. Geeta Sharma Mr. Manoj Kumar Mr. Ram Milan Yadav Mr. Kuldeep Singh Mr. Pal Singh Mr. Rashpal Singh Mr. Gurpreet Singh B.Lib. Dip in Lib. Dip in Lib., Dip in System Mgt., B.A M.Com M.Lib &IS, Ph.D (Pursuing) M.Lib., PGDCA, PGDLAN M.A M.Ed M.A. B.Sc, M.Sc, M.C.A 15. Qualifications of teaching faculty with DSc/D.Litt/Ph.D/MPhil/PG: Sr. No. 1 2 3 4 Dr. Sumit Jain Prof. Gurudutt Sahni Dr. P.C. Maity Dr. Mandeep Kaur 5 Dr. Amandeep Bains 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Name Graduate Post Graduate Mr. Rahul Joshi Mr. Harjit Singh Mr. Jatinder Kumar Mr. Amandeep Singh Mr. Akashdeep Goel Mr. Harpreet Singh Mr. Anuraj Singh Mr. Satbir Singh Saini Mr. PunitSarwal Mr. Manpreet Singh Mr. Sanjeev Kumar Mr. Gurpreet Singh Mr. Mandeep Singh Mrs. Jasmeen Kaur Mr. Rupinder Singh Mr. Amninder Singh Mr. Varinder Singh Mr. Vikas Kumar B. Tech. ME B. Tech. ME B. Tech. ME B.Sc. (Chem) B.Sc ( Physics) B. Tech. ME B. Tech. ME B. Tech. ME B. Tech. ME B. Tech. ME B. Tech. ME B. Tech. ME B. Tech. ME B. Tech. ME B. Tech. ME B. Tech. ME B. Tech. ME B. Tech. ME B. Tech. ME B. Tech. ME B. Tech. ME B. Tech. ME B. Tech. ME Mr. Mandeep Kumar B. Tech. ME M. Tech M. Tech M. Tech M.Sc (Chem) M.Sc ( Physics) M. Tech. Production M. Tech. Industrial M. Tech. Production M. Tech. ME M. Tech. ME M. Tech. ME M. Tech. Industrial M. Tech. Production M. S M. Tech. Production M. Tech. Production M. Tech. ME M. Tech. ME M. Tech. ME M. Tech. Production M. Tech. Production M. Tech. Thermal M. Tech. CAD/CAM M. Tech. Manufacturing Doctorate/Research degree Ph.D Ph.D Ph.D Ph.D Ph.D ( Physics) Ph. D Pursuing Ph. D Pursuing Ph. D Pursuing Ph. D Pursuing Ph. D Pursuing Ph. D Pursuing - 25 26 27 28 Mr.Harkirat Singh Mr. Surinder Singh Mr. Harjaskirat Singh Mr. Harpreet Singh Bedi B. Tech. ME B. Tech. ME B. Tech. ME B. Tech. ME 29 Mr. Amanpreet Singh B. Tech. ME 30 31 32 Mr. Vikram Singh Jamwal Mr. Palwinder Singh Ms. Rimple B. Tech. ME B.Sc. (Maths) B.Sc 33 Ms. Jaskiran Kaur B Sc.(Medical) 34 35 Ms. Binu Bhanot Ms. Rashmi B.Sc. (Chem.) B.Sc. M. Tech. ME M. Tech. Production M. Tech. Production M. Tech. ME - M. E (Thermal M. E. (Thermal) M.Sc. (Maths) M.Sc. MBA (Finance and Marketing) M.Sc. (Chem.) M.Sc ,B.Ed M.Phil M.Phil - 1 6 . Number of faculty with ongoing projects from: a . National: No b . International funding agencies: No c . Grants received: i. Received grant from PTU to conduct International Multi-Track Conference on Sciences, Engineering and Technical Innovations (IMTC 14) on 22nd –23th May, 2015 ii. Received grant from DST to conduct International Multi-Track Conference on Sciences, Engineering and Technical Innovations (IMTC15) on 3rd – 4th June, 2014 iii. Mr. Anuraj Singh got approval of a grant of Rs.60,000 from DST for attending international conference in USA iv. Received grant of Rs. 30,000 from PTU to conduct One day National seminar on “EmergingTrends in Mechanical Engineering” on March 8, 2013. v. Received a grant of Rs 1.80 lakhs from AICTE to conduct Two Days National Conference Entitled under RAME on 12-13 Dec 2013 Organized by Department of Mechanical Engineering, CTIEMT 17. Departmental projects funded by DST-FIST; UGC, DBT, ICSSR, etc. and total grants received a. International Multi-Track Conference on Sciences, Engineering and Technical Innovations (held on 22nd - 23rd May, 2015) received a grant of 50,000/- from ISRO and 70,000/- from PTU, Jalandhar b. International Multi-Track Conference on Sciences, Engineering and Technical Innovations (held on 3rd – 4th June, 2014) received a grant of 1,25,000/- from DST & 60,000/- from companies/ business organizations c. Mr. Anuraj Singh got approved a grant of Rs.60,000 from DST for attending international conference in USA 18. Research Centre/facility recognized by the University a. Institute is recognized as ‘PTU Regional Centre’ to offer M. Tech. ME ( Regular & Part-time) & Ph.D. course work. b. Center of excellence in association with Siemens has been established in the department for providing a platform for latest software (SOLID EDGE) training to the students of Mechanical Engineering Department. c. Research facility with latest CAD and simulation tools such as ‘SOLIDEDGE ST2’, ‘ANSYS 16.1’, ‘Inventor 2015(AutoDesk)’ is established. d. Subscription to online research libraries/networks viz. ‘K Nimbus’ ‘IEEE Xplore’, ‘Science Direct’ and ‘DELNET’ is being provided. e. M.O.U with NIT-Jalandhar & NIT-Hamirpur for exchange of student/faculty and academic published material; collaborative research projects and for organizing cosponsored/jointlyorganized seminars, conferences & workshops. f. Online access to various research databases & Anti-plagiarism tool ‘Turnitin’ is being provided by PTU to all the faculty members 19. Publications: A) By Faculty: a. Publications detail per faculty: YEAR 2015: S. No 1 2 3 Faculty name Dr. Gurudutt Sahni Dr. Mandeep Kaur Mr. Harjit Singh 4 Mr. Mandeep Singh 5 Mr. Sanjeev Kumar 6 Mr. Vikas Kumar 7 Mr. Vikram Singh Jamwal Mr. Varinder Singh Details of Paper (Title, co-authors, journal name, volume, page no, year) Gurudutt Sahni, Balpreet Singh and Swarndeep Singh “The Effect of Thermal Stresses on Gate Valve and its Optimization using New Wedge Design” published in Proceedings of International Conference : IMTC2015 , May 22-23,2015 , CTIEMT Jalandhar Gurudutt Sahni, Balpreet Singh and Swarndeep Singh “Performance Techniques for Operability of Regulating Globe Valve And its Functioning” published in Proceedings of International Conference : IMTC- 2015 , May 22-23,2015 , CTIEMT Jalandhar Mandeep Kaur and Amjad Ali “Alkali metal Impregnated Nickel Oxide: Novel Green Nano Catalyst for Biodiesel Production” European Journal of Lipid Science and Technology, 117, 550-560, 2015 Harjit Singh , Jatinder Kumar, and Rahul Joshi, ”Mechanical Characterization of Natural Fiber Composites : An Experimental Approach” published in Proceedings of International Conference : IMTC2015 , May 22-23,2015 , CTIEMT Jalandhar Harjit Singh, Anish Sachdeva, Gurpreet Kaur “Benchmarking Internal Supply Chain performance: Development of a frame work” International Journal of Mechanical Engineering and Technology (IJMET) Volume 6, Issue 6, June 2015, pp. 119-126. Mandeep Singh , Sikandar Singh and Varinder Singh ”Effect of Weld Groove Volume on Tensile Performance of Gas Tungsten Arc welded Martensitic Stainless Steel” published in Proceedings of International Conference : IMTC- 2015 , May 22-23,2015 , CTIEMT Jalandhar Sanjeev Kumar, Nirmal Singh Kalsi, Amandeep Siingh and Manpreet Singh ”Comparison of Tool Tip Temperature and Cutting Forces using Uncoated and AlCrN single layer coated cutting tool Inserts in Turning” published in Proceedings of International Conference : IMTC- 2015 , May 22-23,2015 , CTIEMT Jalandhar Vikas Kumar, Paramjit Singh ”Effect of Titanium Abrasive Mixed Electrical Discharge Machining on Wear Ratio of AISI P20 Steel” published in Proceedings of International Conference : IMTC- 2015 , May 22-23,2015 , CTIEMT Jalandhar Vikram Singh Jamwal , Amanpreet Singh, and Pawanjot Singh ”Thermal Comfort Model of a Desert Cooler” published in Proceedings of International Conference : IMTC- 2015 , May 22-23,2015 , CTIEMT Jalandhar Varinder Singh , Mandeep Singh and Nishant Bhardwaj “Performance Investigation of Solar Air Heater Duct having square protrusions as Roughness Geometry ” published in Proceedings of International Conference : IMTC- 2015 , May 22-23,2015 , CTIEMT Jalandhar Metrics No. of citations -- -- -- -- I.F.= 2.266 2 -- -- -- -- -- -- -- -- -- -- -- -- -- -- Number of papers published in peer reviewed journals (national /international) by faculty for t h e y e a r 2 0 1 5 : 02 YEAR 2014: S. No 1 2 3 Faculty name Dr. Mandeep Kaur Mr. Jatinder Kumar Mr. Satbir Saini 4 Mr. Manpreet Singh 5 Mr. Sanjeev Kumar 6 Mr. Mandeep Singh 7 Prof. Gurudutt Sahni 8 Mr. Surinder 9 Mr. Anuraj 10 Singh Singh Mr. Vikas Kumar Details of Paper (Title, co-authors, journal name, volume, page no, year) Mandeep Kaur, Amzad Ali, “Trans estrification of waste cottonseed oil using KF Impregnated CaO/NiO as reusable solid catalyst: Reusability and Kinetics”, published in European Journal of Lipid Science and Technology, 116. 80-88, 2014. Mandeep Kaur, Amzad Ali, “Ethanolysis of waste cottonseed oil over lithium impregnated calcium oxide: Kinetics and Reusability studies”, published in Renewable Energy, 63. 272-279, 2014. Jatinder Kumar, Rahul Joshi, “Determination of optimum cutting parameters for surface roughness and tool flank wear in hard turning by Taguchi method”, published in International Journal of Research in Mechanical Engineering, Vol 4, issue 1, April 2014. Nischal Chhabra, Surinder Kumar, Jatinder Kumar, “A Review of Effect of Shielding Gases on Mechanical Properties of Low Carbon Steel in GMAW Process.” published in Proceedings of Internationional Conference: IMTC -2014, 3-4 June 2014, CTIEMT, Jalandhar Jatinder Kumar, Harjit Singh, Rahul Joshi, “Optimization of multiple performance characteristics in EDM using Taguchi Method: An Experimental Investigation”, published in Proceedings of International Conference: IMTC -2014, 3-4 June 2014, CTIEMT, Jalandhar Amandeep Singh Virdi, Satbir Singh saini, “Selecting s best parameters forr manufacturing motor cycle axle using multi criteria decision technique(VIKOR Method AHP)”, IJESRT, 2014 Satbir Singh Saini, Harwinder Lal, Sumit Nagar, “Comparative study of external supply chain performance of FMCG firms using multi criteria decision technique (VIKOR Method)” IJAEST, 2014 Manpreet Singh, Amandeep Singh Bansal, Sanjeev Kumar, “The Effect of different wire electrodes on the MRR and MS work piece using WEDM Process” IJMET,Vol 5,Issue5, May 2014. Sanjeev Kumar , Manpreet Singh , Amandeep Singh,”Recent Development in PVD Coatings for High Performance Cutting Tools- A Review.” published in Proceedings of International Conference: IMTC 2014, 3-4 June 2014, CTIEMT, Jalandhar . Mandeep Singh, Sikandar Singh, “Effect of Heat Input and Post Weld Heat Treatment on the Mechanical Properties of GTA Welded AISI 410 SS Joints 178-180 published in Proceedings of International Conference: IMTC -2014, 3-4 June 2014, CTIEMT, Jalandhar Gurudutt Sahni, Balpreet Singh,“To Investigate Stresses and Deformation Analysis in Skeletomuscular Regions While Sitting Positions using FEM” published in Proceedings of International Conference: IMTC -2014, 3-4 June 2014, CTIEMT, Jalandhar Surinder Singh, Poster presentation on “WORK POSTURE ASSESSMENT IN FORGING INDUSTRY BY REBA METHOD” published in Proceedings of International Conference: IMTC -2014, 3-4 June 2014, CTIEMT, Jalandhar Anuraj Singh, Paper presented “Ergonomic Investigation of muscular skeleton disorder in small scale Indian Industry.” In 17 th Annual ergonomic conference 2014, March 24-27, 2014, USA. Vikas Kumar, Paramjit Singh, Gaurav Tejpal “A Review of various Techniques to improve MRR in Sinking Electrical Discharge Machining” published in Proceedings of National Conference on Latest Development in Science , Engineering & Management, 28-29 March 2014, ACET, Amritsar Metrics No. of citations IF: 2.266 3 IF: 2.989 3 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --- --- -- -- -- -- -- -- Number of papers published in peer reviewed journals (national /international) by faculty for t h e y e a r 2 0 1 4 : 06 YEAR 2013: S. No 1 2 Faculty name Dr. Mandeep Kaur Mr. Jatinder Kumar Details of Paper (Title, co-authors, journal name, volume, page no, year) Mandeep Kaur, “published in proceedings of International conference: Bioenergy, Environment and Sustainable Technologies, 2013, Arunai Engineering college, Tiruvanamalai, Tamilnadu. Mandeep Kaur, “published in proceedings of 6th workshop on Fats and oils as Renewable Feed Stock for the chemical industry, 2013, KIT Karlsruhe, Germany. Jatinder Kumar, Rupinder Singh,”investigating the effect of vulcanization in tread rubber aqpplications” Material Science forum, Switzerland, Vol 751, pp 1-7, 2013 Amit Sharma, Himanshu Tripathi, Jatinder Kumar,”analysis of chnage of mechanical properties in low alloy steel (similiar to a AISI 8740) friction welded with inconel 718 after heat treatment” IJAET, Vol 4 ,issue 1, 2013 Himanshu Tripathi, Dinesh kumar, Jatinder Kumar,” study of 3D crank mechanism using asdvance modeling and anlysis technique” Arni International Journalanagement science and Technology, 2013 Nimo Singh Khundrakpam, Jatinder Kumar and Gurinder Singh Brar, “Effect of process parameters on MRR of Wire EDM for EN-8 Steel” Published in Proceedings of National Conference: RAME -2013, 12-13 December 2013, CTIEMT, Jalandhar Metrics No. of citations -- -- -- -- -- -- -- -- -- -- -- -- 3 Mr. Amandeep Singh Amandeep Singh, Sanjeev Kumar, Manpreet Singh, ”Free transverse analysis of uniform beam using MATLAB” Published in Proceedings of National Conference: RAME -2013, 12-13 December 2013, CTIEMT, Jalandhar -- -- 4 Mr. Amanpreet Singh Amanpret Singh, Sumit Sharma, T.K. Jindal,” Experimental Study of horizontal ground heat exchanger” IJMSCE Vol 2, issue 3, 2013 -- -- 5 Mr. Mandeep Singh -- -- -- -- -- -- -- -- -- -- -- -- 6 Mr. Harjit Singh 7 Mr. Satbir Singh Saini 8 Mr. Gurpreet Singh Mandeep Singh, Gurpreet Singh “Effect of Weld Groove Volume on Tensile Performance of Gas Tungsten ArcWelded Martensitic Stainless Steel (AISI 410 SS) Joints”. Published in Proceedings of National Conference: RAME -2013, 12-13 December 2013, CTIEMT, Jalandhar Harjit Singh, Jatinder Kumar, Harbir Singh, “ A Framework for Benchmarking Internal Supply Chain Performance” Published in Proceedings of National Conference: RAME -2013, 12-13 December 2013, CTIEMT, Jalandhar Harbir Singh, Harish Kumar, Harjit Singh, “Study of the musculoskeletal disorders among truck drivers of transport industry in punjab, india”. Published in Proceedings of National Conference: RAME -2013, 12-13 December 2013, CTIEMT, Jalandhar. Harjit Singh, Arvind Bhardwaj “Bench |Marking internal supply chain performance using financial data” international conference on production and industrial engineering at NIT Jalandhar 2013. Amandeep Singh Virdi, Satbir Singh Saini, Amit Sharma, “Selection for Best Parameter for Raw Material of an Axle in Motorcycle Using AHP and Multi Criteria Decision Technique [VIKOR Method]”. Published in Proceedings of National Conference: RAME -2013, 12-13 December 2013, CTIEMT, Jalandhar. Gurpreet Singh, Mandeep Singh, “Ultrasonic Guided Waves for Damage Detection in Cylindrical Geometries for Torsion Damages” Published in Proceedings of National Conference: RAME -2013, 12-13 December 2013, CTIEMT, Jalandhar. 9 Rahul Joshi, Simeranpreet Singh Gill and Jatinder Kumar “Mechanical and physical properties of natural rubber and its blend – a review” Published in Proceedings of National Conference: RAME -2013, 12-13 December 2013, CTIEMT, Jalandhar Seema, Darshan Kumar jindal, Rahul Joshi “ Supplier selection and evaluation : a must for industry” higher education in india: the changing facet, 2013 Rahul Joshi, Dr. Simranpreet singh Gill, “ effect of vulcanization process parameters on mechanical and physical properties of vulcanized SBR 1502 rubber blend” International conference om AFTMME 2013. Mr. Rahul Joshi -- -- -- -- -- -- 10 Mr. Surinder Singh Surinder Singh “A Proposed REBA on Small Scale Forging Industry” International Journal of Modern Engineering Research Vol. 3, Issue. 6, Nov - Dec. 2013 pp-3796-3802 -- -- 11 Mr. Harpreet Singh Harpreet Singh “Improvement In The Corrosion Rate And Mechanical Properties Of Low Carbon Steel Through Deep Cryogenic Treatment” International journal of scientific & technology research volume 2, issue 6, June 2013. -- -- Number of papers published in peer reviewed journals (national /international) by faculty for the year 2013: 05 YEAR 2012: S. No 1 Faculty name Mr. joshi Details of Paper (Title, co-authors, journal name, volume, page no, year) Metrics No. of citations -- -- Rahul Rahul Joshi, Dr. Simarpreet Gill, “ Optimization of vulcanization in wind shield weather rubber strip application” IJAET, vol 3, issue 4, 2012 Number of papers published in peer reviewed journals (national /international) by faculty for the year 2012: 01 Total Number of publications per faculty: S.No Name 1 Prof. Gurudutt Sahni 2 Dr. Mandeep Kaur 3 Mr. Rahul Joshi 4 Mr. Harjit Singh 5 Mr. Jatinder Kumar 6 Mr. Amandeep Singh 7 Mr. Harpreet Singh 8 Mr. Anuraj Singh Total no. of publications* Number of papers published in peer reviewed journals (national / international) 2015 2 2014 1 2013 0 2012 0 2015 0 2014 0 2013 0 2012 0 1 2 2 0 1 2 0 0 0 0 3 1 0 0 0 1 2 0 3 0 1 0 0 0 0 3 4 0 0 1 3 0 0 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 9 Mr. Satbir Singh Saini 10 Mr. Manpreet Singh 11 Mr. Sanjeev Kumar 12 Mr. Gurpreet Singh 13 Mr. Mandeep Singh 14 Mr. Amanpreet Singh 15 Mr. Surinder Singh 16 Mr. Vikas Kumar 17 Mr. Vikram Jamwal 18 Mr. Varinder Singh TOTAL 0 2 1 0 0 2 0 0 0 1 0 0 0 1 0 0 1 1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 1 1 1 0 0 0 0 0 0 0 1 0 0 0 1 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 10 13 19 1 2 6 5 1 Publications by students: S. No. Student Name Batch Total No. of publications 1 Mr. Shubham Sharma 2011 01 2 Mr. Sahil Arora 2011 01 3 Mr. Rohit Guleria 2011 01 Details of Publications of Students: 1. Shubham Sharma, Amandeep Singh and Mandeep Kuar “Some Studies on Investigating the concept and Challenges of Green Tribology in Automobile Industry” , IMTC-15, ISBN: 978-81-929077-3-4 (print version), pp.62-66, 2015 2. Sahil Arora and Rohit Guleria “Solar Sorption Refrigeration Methods ( An Overview of Modern techniques)” IMTC-15, ISBN: 978-81-929077-3-4 (print version), pp.70-72, 2015 a. Number of publications listed in International Database (For Eg: Web of Science, Scopus, Humanities International Complete, Dare Database - International Social Sciences Directory, EBSCO host, etc.): 12 b. Monographs: NIL c. Chapter in Books: NIL d. Books Edited: NIL e. Books with ISBN/ISSN numbers with details of publishers: NIL f. Citation Index & h-index: S. No Faculty Name Cited By h-index 1 Dr. Mandeep Kaur 08 02 20. Areas of consultancy and income generated: No 21. Faculty as members in S. No 1 2 Name of Faculty Member Rahul Joshi Harjit Singh National Committee International Committee - ISTE ISTE Editorial Board - 22. Student projects: a. Percentage of students who have done in-house projects including inter departmental/programme: 100% (part of curriculum) b. Percentage of students placed for projects in organizations outside the institution i.e.in Research laboratories/Industry/ other agencies: 100% (part of curriculum) 23. Awards/Recognitions received by faculty and students: a. 5 students of Mechanical Engineering department received a cash prize of Rs 50,000/- as a Best Model Award for all categories to their Project HYBRID BIKE in INNOTECH 2012 by Puspha Gujral Science City, Kapurthala under Registration Number A/E/23. b. Following students won Best Model Award S.No 1 Roll No 81406114020 Name Mr. Harsimrat Singh Class ME Sem 8 Batch 2008 2 81406114023 Mr. Kanwarpal Singh ME 8 2008 3 81406114042 Mr. Sukjinder Singh ME 8 2008 4 81406114015 Mr. Gurinder singh ME 8 2008 5 81406114025 Mr. Lakhinder Singh ME 8 2008 6 81406114028 Mr. Manpreet Singh ME 8 2008 Remarks Best Model Award c. List of achievers in youth festivals: S.No 1 2 Roll No Name 1241147 Mr. Mahesh Jangir ME 6 1141579 Mr. Jasjit Singh ME Mr. Damanjit Singh Mr. Lakshaya 1282664 3 4 1282673 Class Sem Batch Event Remarks 2012 Fine Arts 2nd position in National Youth Festival 2015 of All India Universities held at Indore 7 2011 Group Shabad 2nd position in PTU Zonal Youth Festival 2014. ME 7 2011 Group Shabad 2nd position in PTU Zonal Youth Festival 2014. ME 7 2011 Play 2nd position in PTU Zonal Kumar 1282664 Mr. Damanjit Singh ME 7 2011 Vaar Singing Mr. Mahesh Jangir ME 5 2012 Fine Arts Mr. Lakshaya Kumar ME 5 2011 Play Mr. Ranjeet Singh ME 5 2011 Bhangra Mr. Jasjit Singh ME 5 2011 Indian Music Mr. Damanjit Singh ME 5 2011 Indian Music 5 6 7 8 Youth Festival 2014. 1241147 1282673 1141631 1141579 9 1282664 10 11 12 1241147 1241211 Mr. Mahesh Jangir ME Mr. Gurpreet Singh ME 3 3 2012 Fine Arts 2012 Literary 2nd position in PTU Zonal Youth Festival 2014 1st position in PTU Zonal Youth Festival 2014. 1st position in PTU Zonal Youth Festival 2013. 1st position in PTU Inter Zonal Youth Festival 2013. 1st position in PTU Zonal Youth Festival 2013. 1st position in PTU inters zonal Youth Festival 2013. 2nd position in PTU Zonal Youth Festival 2012. 1st position in PTU Zonal Youth Festival 2013. 1st position in PTU inters Zonal Youth Festival 2013. 1st position in PTU Zonal Youth Festival 2013. 1st position in PTU inters Zonal Youth Festival 2013. 2nd position in PTU Zonal Youth Festival 2012. 2nd position in PTU inters zonal Youth Festival 2012. 1st position in PTU Zonal Youth Festival 2013. 2nd position in PTU inters zonal Youth Festival 2013. 2nd position in PTU Zonal Youth Festival 2012. d. List of achievers in University Merit S.No Roll No Name Class 1 1141647 Mr. Shubham Sharma 2 1182406 Mr. Deepak Kochhar 3 1307325 Mr. Amit Kumar Singh 4 1307356 Mr. Sourav 5 1307357 Mr. Sukhdev Singh 6 1307355 Mr. Simranjit Singh ME ME AUE AUE AUE AUE Sem Batch 6th B 2011 7th 2010 3rd 2013 3rd 2013 3rd 2013 3rd 2013 %age Position 86% 4th 86.2% 74.35% 73.29% 67.76% 67.65% 4th 2nd 4th 9th 10th e. List of achievers in PTU Inter College Sports meet S. No. Roll No. Name Class Sem Year Position 1 100221129273 Mr.VivekBhati ME 3rd 2011 Silver 2 100221129273 Mr.VivekBhati ME 5th 2012 Bronze Event Cross Country Cross Country 3 100221129273 Mr.Vivek Bhati ME 7th 2013 Bronze 4 100221129294 Mr.Ishant Diwedi ME 7th 2013 Bronze 5 1184801 Mr.Nikhil Choudhary ME 7th 2013 Bronze 6 100221129278 Mr.Geetansh Aggarwal ME 7th 2013 Bronze 7 1141601 Mr.Kailash Chand ME 5th 2013 Bronze 8 1291204 Mr.Gagandeep Singh ME 3rd 2013 Bronze 9 100221129299 Mr.Ravi ME 7th 2013 Bronze 10 1407870 Mr.Lalhmingsanga ME 1st 2014 Gold Cross Country Cross Country Cross Country Cross Country Cross Country Cross Country Cross Country Basketball 11 1241183 Mr.Amarjot Singh ME 5th 2014 Gold Basketball 12 1407924 Mr.Harjinder Singh ME 3rd 2014 Gold Basketball 13 1407869 Mr.Kulwinder Singh ME 1st 2014 Gold Basketball 14 1241173 Mr.Abhishek Singh ME 5th 2014 Gold Basketball 15 1241204 Mr.Gagandeep singh ME 5th 2014 Silver Cross Country 16 1241642 Mr.Shamsher Singh ME 5th 2014 Silver Cross Country f. S.No 7 students of ME won top positions in “National Student symposium - Managing Innovations in science & Technology” held at CTIEMT on March 30th – 31st 2015 Name of Student University Roll Event Position/Award No. 1 2 3 4 5 6 7 Mr. Sahil Arora Mr. Rohit Guleria Mr. Gurpreet Singh Mr. Amandeep Mr. Prateek Mr. Kailash Rawat Mr. Deepak Kumar 1141638 1141635 1241211 1241182 1307475 1307885 1241197 Paper Presentation Paper Presentation Paper Presentation Paper Presentation Paper Presentation Poster Presentation Poster Presentation Best Paper Best Paper 1st 1st 2nd 1st 1st 24. List of eminent academicians and scientists/visitors to the department: Sr. No. Eminent Academicians and Scientists / Visitors to the Department Designation University/Institution Professor IIT, Roop Nagar Purpose 1 Dr. Harpreet Singh 2 Dr. R.K. Garg Professor NIT Jalandhar Expert talk in two days AICTE sponsored national conference “RAME-2013” on 12-13 December 2013. Expert talk in one day seminar “Emerging Trends in Mechanical Engineering” on 8 March 2013. Expert talk in two days AICTE sponsored national conference “RAME-2013” on 12-13 December 2013. Session Chair in international conference “IMTC 14” on 3-4 June 2014. 3 Dr. L.P Singh Professor NIT Jalandhar 3 Dr. Subhash Chander Professor NIT Jalandhar 5 Dr. Jagdev Singh Professor BCET Gurdaspur 6 7 Dr. Darshan Kumar Associate Jindal Professor Dr. Simranpreet Singh Assistant Gill Professor 8 Dr. Tajeet Singh 9 Dr. S. S. Sandhu 10 Dr. Niraj Bala 11 Dr. Ranjit Singh Associate professor Assistant Professor Assistant Professor Associate Professor Session Chair in international conference “IMTC 15” on 22-23 June 2014 Expert talk in one day seminar “Emerging Trends in Mechanical Engineering” on 8 March 2013. Expert talk on “Computational Fluid Dynamics (CFD)” As a mentor for the subjects “HT, RAC and MV”. Expert talk in one day seminar “Emerging Trends in Mechanical Engineering” on 8 March 2013. Session Chair in international conference “IMTC 15” on 22-23 June 2014 As mentor for the subjects “Fluid Mechanics and Fluid Machinery” Expert talk in one day seminar “Emerging Trends in Mechanical Engineering” on 8 March 2013. SBSCET, Ferozepur As mentor for the subject “Strength of Material” NIT Jalandhar Session Chair in “IMTC 14” on 3-4 June 2014. BBSBEC, Fathegar Sahib Session Chair in national conference “IMTC 14” on 3-4 June 2014. Expert talk on “Energy and Environment” in International Conference “IMTC15” on 22nd-23rd May 2015 BCET Gurdaspur BCET Gurdaspur BCET, Gurdaspur 25. Seminars/Conferences/Workshops organized & the source of Funding a) National a. Wipro sponsored FDP on “Faculty Empowerment Program” under Wipro Mission 10 x (Level I), held from March14-18, 2011. b. Wipro sponsored FDP on “Wipro Mission 10 X Certification Program (Level II) held from March 26-27, 2012. c. PTU Sponsored One day national seminar on “Emerging Trends in Mechanical Engineering” on March 8, 2013. d. AICTE Sponsored Two Days National Conference Entitled under “Recent Advances in Mechanical Engineering” RAME (12-13 Dec 2013) Organized by Department of Mechanical Engineering, CTIEMT. e. PTU sponsored national conference on “Higher education in India: The changing facets” held at CTIEMT, Jalandhar on 4 – 5th January 2013. b) International a. ISRO & PTU sponsored “International Multi track conference on Sciences, Engineering and Technical Innovations” held on 22nd – 23rd May 2015 b. DST sponsored “International Multi track conference on Sciences, Engineering and Technical Innovations” held at CTIEMT on 3rd – 4th June, 2014 26. Student profile programme/course wise: Name of the Course/programme (refer question no. 4) Applications received BTECH-ME(2014 - 18) 77 BTECH-ME(2013 -17) Enrolled Selected *M *F Pass percentage 68 68 0 NA 70+56 LEET=126 69+46LEET=105 103 2 NA BTECH-ME(2012 - 16) 93+51 LEET=144 88+46 LEET =134 134 0 NA BTECH-ME(2011- 15) 85+29 LEET=114 81+23 LEET =104 101 3 NA BTECH-ME(2010- 14) 74+25 LEET=99 69+23 LEET=92 92 0 67.39% BTECH-ME(2009- 13) 89+ 18LEET=107 85+13 LEET=98 98 0 71.42% BTECH-ME(2008- 12) 55+19 LEET=74 50+15 LEET=65 65 0 78.46% BTECH- AE(2014 - 18) 25 22 22 0 NA BTECH- AE(2013 - 17) 33+20 LEET=53 32+17 LEET=49 49 0 NA MTECH-ME(2013 - 15) 6 5 5 0 NA MTECH-ME(2014 -16) 4 4 4 0 NA *M=Male *F=Female 27. Diversity of Students %of students from the same state % of students from other States % of students from abroad B.Tech. ME(2014) 80.30% 19.70% - B.Tech. ME(2013) 88.35% 11.65% - 80.60% 19.40% - 75.96% 24.04% - Name of the Course B.Tech. ME(2012) B. Tech. ME(2011) B .Tech AE (2014) B .Tech AE (2013) 95.45% 4.55% - 79.6% 20.40% - 100% - - 100% - - M. Tech ME(2014) M .Tech ME(2013) 28. 29. 30. How many students have cleared national and state competitive examinations such as NET, SLET, GATE, Civil services, Defense services etc. Regd No. Name Batch Remarks 1141595 Mr. Hemant Priyadarshi 2011-2015 Qualified GATE 2015 1141613 Mr. Manish Kumar 2011-2015 Qualified GATE 2015 100221129251 Mr. Lucky Bagga 2010-2014 100221129254 Mr. Mathew Samson 2010-2014 Qualified GATE 2014 Qualified GATE 2014 100221129283 Mr. Ashfaque Ahmad 2010-2014 Qualified GATE 2014 Student progression Against % enrolled 2010-14 2009-13 Student progression 2011-15 UG to PG 7.7% 13.09% 9.18% 7.57% PG to M.Phil. NA NA NA NA PG to Ph.D. NA NA NA NA Ph.D.to Post-Doctoral NA NA NA NA Employed •Campus selection •Other than campus recruitment 32.03% 13.59% 30.95% 10.71% 25.51% 12.24% 28.78% 7.57% Entrepreneurship/Self-employment 1.94% 1.19% 1.02% 0.00% Details of Infrastructural facilities 2008-12 a) Library Trade No of Title of No of books books National International Journals Journals P/I A/I P/I E-Journals A/I 1.DELNET ME 373 2392 2 2 2 2 2.Science Direct 3.K Nimbus 4. IEEE b) Internet facilities for staff Internet is provided by Connect and dreamtel with data rate of 40mbps and in labs with speed of 16kbps and students c) Total number of class rooms - 9 well organized classrooms with pleasant ambience; - Exclusive classroom for each section with seating capacity of 70 to 80; d) Class rooms with ICT -2 of the classrooms are equipped with ICT facility. facility - Following well established labs for first common courses are being used: 1) 2) 3) 4) 5) Communication skills Engineering Physics Engineering Chemistry Basic Electrical & Electronics Engineering Fundamentals of computer programming & IT - 21 well established labs are being used for the core subjects of ME, namely, e) Laboratories 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Engineering Material and Metallurgy lab Strength of Material lab Applied Thermodynamics lab Fluid Mechanics lab Manufacturing processes lab Theory of Machines lab Computer Aided Design and Manufacturing lab Mechanical Measurement and Metrology lab Industrial Automation and Robotics lab Automobile Engineering lab Heat Transfer lab Fluid Machinery lab Refrigeration and Air Conditioning lab Mechanical Vibration lab Computer Graphics lab Internal Combustion Engine lab Automotive Chassis system lab 18. 19. 20. 21. Automotive Electrical Systems lab Vehicle Body Engineering lab Automotive Transmission lab Learning Resource Lab In CG , CADCAM and Learning Resource lab are equipped with tools AutoCAD2015, AutoCAD Mechanical 2015, Solid Edge ST2, ANSYS 16.1 31. Number of students receiving financial assistance from college, university, government or other agencies S. no. Schemes provided by college/Other Agencies Number of students (ME) 2014 B.Tech - AIEEE rank from 40,001 to 70,000 OR PCM marks > 80% upto 85% in 12th--50% tuition fee waiver 3 2 B.TECH- LEET (IT/EEE/EE/ECE )-25% Tuition Fee Waiver NIL 3 B.Tech -AIEEE rank from 70,001 to 10,00,00 OR PCM marks 75% to 80% in 12th--25% tuition fee waiver. 3 1 Number of students (ME) 2013 Number of students (ME) 2012 Number of students (ME) 2011 Number of students (AUE) – 2014 Number of students (AUE) – 2013 3 NIL Nil Nil 3 NIL NIL NIL Nil 2 3 5 Nil Nil 1 NIL Nil Nil 1 Nil 13 4 Nil 2 Nil Nil 1 Nil NIL 3 9 3 Nil 4 NIL 4 B.Tech-AIEEE rank up to 40,000 OR PCM marks > 85% in 12th--100% tuition fee waiver 5 CTians 25% tuition fee waiver for any higher courses (if above 60%) 10 6 Employees Ward 25% Tuition Fee Waiver ( If Above 60% ) NIL 7 OBC Post Matric Scholarship (Punjab) 3 8 PTU Fee Waiver Scholarship 4 4 4 4 1 NIL 9 SC Post Matric Scholarship (PUNJAB) 3 3 14 5 10 7 10 SC Scholarship Bihar 2013-14 NIL Nil Nil Nil Nil 5 11 Second brother/sister 25% tuition fee concession. 2 1 2 Nil 1 1 1 32. Details on student enrichment programmes (special lectures / workshops / Seminar) with external experts a. An industrial visit to “Medhaavi Center for Automotive Research Hoshiarpur” is organized for providing industrial exposure to students of B. Tech AUE 5 on 08th Aug, 2015. b. Industrial visit of Mechanical Engineering students at Aarti International, Ludhiana on 06th Feb, 2015. c. ACCEPT program is conducted by CCPC for students of all semesters to train them in various areas of soft skills & aptitude d. Industrial visit of Mechanical Engineering students at RCF Kapurthala on 23rd Feb, 2013 and 2nd March, 2014 e. Industrial visit of Mechanical Engineering students at Monte Carlo, Ludhiana on 03rd Nov, 2014 f. One day workshop on CRDi Technology by Medhavi Centre for Automotive Research on 7 January 2013. g. “CADMANIA 13” contest to promote skills in computer aided design/drawing focusing on developing 2D/3D views of mechanical components/parts on 29 January 2013. h. “CADMANIA 14” contest to promote skills in computer aided design/drawing focusing on developing 2D/3D views of mechanical components/parts on 16 October 2014. i. Two Days National Student Symposium “MIST-15” on 30-31 March ,2015 to encourage the students for innovations in Science and Technology and to provide the opportunity to discuss their work with others. j. Expert talk on “Computational Fluid Dynamics (CFD) by Dr. Subhash Chandra from NIT, Jalandhar. k. Expert talk on RECENT ADVANCEMENTS IN MECHANICAL ENGINEERING WITH FOCUS ON NTM by Dr. R. K. Garg (NIT Jalandhar) on 8th March,2013. l. Expert talk on ROLE OF HUMAN FACTORS IN MECHANICAL ENGINEERING INDUSTRY by Dr. L.P. SINGH (NIT Jalandhar) on 8th March,2013. m. Expert talk on FUZZY LOGIC IN ENGINEERING SYSTEM by Dr .Jagdev Singh (BCET Gurdaspur) on 8th March,2013. n. Expert talk on CRYOGENIC TREATMENT OF CUTTING STEEL by Dr. Simranpreet Singh Gill (BCET Gurdaspur) on 8th March,2013. 33. Teaching methods adopted to improve student learning a. b. c. d. e. f. g. h. 34. Before formal commencement of class room teaching, students are made to undergo ‘The Orientation Programme’ in order to make them aware with: 1. Study Scheme 2. Curriculum Details 3. Key Position Holders 4. Anti Ragging Committee Members (Contact no. and Email ID’s) 5. Women Grievance Cell (Contact no. and Email ID’s) 6. Rules and Regulations of College. The department makes its academic calendar for every academic session .This calendar is followed strictly to meet every goal in time .The calendar is attached here with. The Department provides college outlines and course schedules prior to the commencement of the academic session. The schedule is as listed in the academic calendar. B. Tech (Mechanical Engineering) predominantly follow the lecture method. Apart from classrooms ,the Industrial visits are organized for the better experience of the students The PDP (Personality Development Programs) are organized. Group Discussion, Role play events are organized for the students for making learning more efficient. Nimbus program is set up by the department to provide the teaching material to the students study anytime anywhere through e- learning. Advisers for each class are appointed to guide every student in every possible way, for the better growth of the students. All the teachers are evaluated by the students on basis of the teaching, way of interactions, and knowledge of the teacher. After the results, required actions are taken. Participation in Institutional Social Responsibility (ISR) and Extension activities A Seven Days NSS Camp Was Organized at CT Institute of Engineering, Management & Technology in Co-Ordination with PTU during 26/02/2013 To 04/03/2013. The main agenda of this camp was “Cancer & 7 8 Mr. Rahul Jasrotia Mr. Ashwarya 1141629 1241194 9 10 11 12 13 Sharma Mr.Gopal Kumar Mr. Ishant Mr. Sajan Mr. Ashfaque Ms. Drishti 100221129289 100221129294 100221129314 100221129283 1141582 22 23 24 25 26 27 Mr. Rahul Kumar Mr. Ayushranjan Mr. Mayank Kumar Mr. Manish Mr. Hemant Mr. Sanchit Mr. Ankit Mr. Ritesh Mr. Gurpreet Mr. Jasbir Mr.Guneet Singh Mr. Richi Mr. Geetansh Mr. Vishal Sagar 100221129311 100221129284 1141988 1141613 1141595 1241559 1241518 1141634 1241212 1307634 1241208 1241246 100221129247 1307911 28 Mr. Sidharath 1241254 CTIEMT 14 15 16 17 18 19 20 21 Duration with Dates SEVEN DAYS 26TH FEB, 2013 TO 4TH MARCH, 2013 1241241 1241197 1241269 100221129315 100221129301 1141644 Theme of the Event HEPATITIS & CANCER AWARENESS Mr. Rahul Raj Mr.Deepak Kumar Mr. Zahid Iqubal Mr. Sandeep Mr. Manish Kumar Mr. Shivam Kumar Organizing Institute/ Department ENVIROMENTA L AWARENESS 1 2 3 4 5 6 Activity attended CTIEMT Name of the Student (with Registration Number) Name Roll No SEVEN DAYS NSS CAMP S. No. 7 DAYS NSS CAMP Hepatitis Awareness” in the villages near by Jalandhar. More than 300 students participated in this camp; from CT Group of Institutions and different institutions/colleges of Punjab. Students of CT Institutions and various colleges affiliated to Punjab Technical University visited the nearby village Pholariwal and made the villagers aware by street play at Pipal Chowk of village about the destructive effects of drug addiction and told them how to prevent such damages under the aegis of Seven Days NSS Camp On “Hepatitis And Cancer Awareness” organized by CT Group Institutions in collaboration of Punjab Technical University, Kapurthala. 1308380 1241207 1353753 38 Mr. Ujjwal sagar 1307675 39 Mr. Jasbir Singh Mr. Chandramani 1307634 36 40 1307619 42 Kumar Mr. Devdeep Bhanot Mr. Ajay Kumar 43 Mr. Amandeep 1241182 44 Singh Mr. Guneet Singh 1241208 41 45 47 Mr.Gurpreet Singh Mr. Richi Singh Mr. Ashwani 48 Kumar Mr. Sahil Sood 46 49 50 51 52 53 54 55 35. Mr. Shubham Mr. Anmol Singh Mr. Keshav Sharma Mr. Rajinder Singh Mr. Rahul Sharma Mr. Puneet Mr. Amritpal Singh 1241199 1241177 1241212 1241246 1307870 FIVE DAYS OCTOBER 3 – OCTOBER 7, 2013 37 Mr. Paramjit Singh Mr. Gourav Sharma Mr. Pardarpan FIVE DAYS SEPTEMBER 23 - SEPTEMBER 27, 2014 35 EDUCATIONAL SURVEY Mr. Ishant Diwedi 100221129256 100221129277 100221129247 100221129294 EDUCATION-AL SURVEY 34 100221129248 CTIEMT 31 32 33 Pangotra Mr. Harmanpreet Singh Mr. Mohit Paul Mr. Amit Kumar Mr. Geetansh 30 CTIEMT 1182407 ASEREDUCATIONAL CAMP Mr. Gaurav ASER-EDUCATIONAL CAMP 29 1241249 1307354 1307326 1307886 1307657 1241242 1241240 1241187 SWOC analysis of the department and Future plans Strengths: a. b. c. d. A very dedicated, dynamic and self motivated faculty and staff. All faculties have excellent academic backgrounds. Good infrastructural facilities including well equipped labs, library and IT facilities. The Mechanical Engineering program combine classroom and laboratory learning in technical areas with a broad curriculum and industry assignments to impart an Excellent Education. e. MOU with Texas Instruments Weaknesses: a. b. c. A few students deficient in certain aspects like communication skills, poor academic and social backgrounds. Lack of awareness among students regarding current technology. Students having a habit of being spoon-fed. Opportunities: a. b. c. A good exposure and support to faculty for self development through FDPs, Seminars, STTPs etc Motivation for research work (students as well as faculty). Membership with technical bodies like ISTE etc. Challenges: a. b. c. Competition due to mushroom growth of engineering institutes locally and globally. Admissions of good quality and quantity of students. Declining job opportunities for ME in the region. Future plans of the department: a. b. c. d. Improve the process of teaching and learning through continuous assessment. Recruit, nurture and retain outstanding students and faculty. Promote active learning as per Wipro mission 10X. Focus more on research and other activities to resonate with the current wavelength of today’s fast growing world.
© Copyright 2019