Hydro-pneumatic Handtool for Lockbolts

Hydro-pneumatic Handtool for Lockbolts
73200 Model
Featuring an innovative new hydraulic design* and using the latest sealing and guiding
technology, this new tool delivers unmatched fastening efficiency and dependability.
*Patent pending
Latest technology bearing
rings, lip seals, and wipers
Proven tool robustness,
minimal oil-loss and long life
Smooth cylindrical
head shape
Free of protrusion for
optimised assembly
access
Static deflector
Fixed head length as no
external moving parts
Existing nose equipment
Uses the well-proven
standard 722-series
components
Maraging steel head piston
& air piston rod
Improved robustness and
long life
Lightweight Genesis®
pneumatic trigger operation
Stress-free ergonomic
actuation of tool
Balanced ergonomic design
Comfortable handle form
and position reduces
operator fatigue
Forged aerospace-grade
aluminium alloy head and
handle
One-piece design delivers
the optimum combination
of low weight, strength
and durability
www.StanleyEngineeredFastening.com
Patent pending design
Innovative operation
reduces shock loading
during operation, and
increases time before
re-priming
Avdel USA LLC
614 NC Highway 200 South
Stanfield, North Carolina 28163
Tel. +1 704 888-7100 · Fax -0258
[email protected]
Avdel Canada Limited
1030 Lorimar Drive
Mississauga, Ontario L5S 1R8
Tel. +1 905 364-0664 · Fax -0678
[email protected]
© 2013 Stanley Black & Decker, Inc., Rev. 12a.2012 Avbolt®, Avdel®, Avseal® and Genesis® are registered trademarks of Avdel UK Limited. Data shown is subject to change without prior notice as a result of continuous product development and improvement policy.
Your local STANLEY Engineered Fastening representative is at your disposal should you need to confirm latest information.
page 1/2
Hydro-pneumatic Handtool for Lockbolts
73200 Model
Specifications
Dimensions
10.8 lbs
(4.9 kg)
Pull force (@ 5.5 bar)
6,407 lbf
(28.5 kN)
Stroke
0.79"
(21 mm)
Cycle time
3 seconds
Noise level
<75 dB(A)
Vibration
<2.5m/s²
12.95"(329 mm)
15.31" (389 mm)
Weight (without nose equipment)
Placing Capability
High pull force and long stroke mean the 73200
tool can install all POP Avdel lockbolts up to ø3/8"
(10 mm), all Avbolt® fasteners up to ø5/16" (8 mm),
and Avseal® II sealing plugs up to ø16mm diameter.
For detailed information on placing capability,
required air pressure, and nose equipment please
refer to the tool manual or contact your local
STANLEY Engineered Fastening representative.
www.StanleyEngineeredFastening.com
Avdel USA LLC
614 NC Highway 200 South
Stanfield, North Carolina 28163
Tel. +1 704 888-7100 · Fax -0258
[email protected]
Avdel Canada Limited
1030 Lorimar Drive
Mississauga, Ontario L5S 1R8
Tel. +1 905 364-0664 · Fax -0678
[email protected]
© 2013 Stanley Black & Decker, Inc., Rev. 12a.2012 Avbolt®, Avdel®, Avseal® and Genesis® are registered trademarks of Avdel UK Limited. Data shown is subject to change without prior notice as a result of continuous product development and improvement policy.
Your local STANLEY Engineered Fastening representative is at your disposal should you need to confirm latest information.
page 2/2
`