ePowertrain Products - Transmission Digest!

D I G E S T
November 2014
Products featured on these pages include those from aftermarket suppliers and
are not necessarily of OE design or sourced from OE manufacturers.
4L60/65/70-E Separator Plates
6T40/45/50Oversized PR-Valve Kit
Bonded valve-body separator plates with integrated screens
for GM 4L60-E, 4L65-E and 4L70-E are now available from
Precision International. Applications include GM pickups,
vans and SUVs in the 1998-2013 model years. Each plate
comes with instructions and illustrations showing drilling
patterns, the company said.
First-generation GM 6T40, 6T45 and 6T50 transmissions
may exhibit multiple line-pressure and converter-related
problems because of excess wear in the main pressure-regulator bore. Featuring upgraded materials to protect against
premature wear, Sonnax oversized pressure-regulator-valve
kit 144510-01K restores hydraulic integrity, delivering
proper line-pressure control in all ranges, according to the
company.
ZF 8HP70 Overhaul Kit
Transgo 6T70 Shift Kit
New TransTec® overhaul kit 2658 services the ZF
RWD/AWD eight-speed HP70 transmission. Featured subkits and components include a sealing-ring kit, molded rubber pan gasket, yoke-spline seal, manual-lever seal,
converter seal, and 2WD and 4WD rear seals, the company
said. The HP70 is used in vehicles including BMW,
Chrysler,
Dodge,
Jaguar, Jeep,
Lancia, Land
Rover,
Maserati and
Rolls Royce
in model
years ranging
from 2009 to
2014.
The Transgo® 6T70 Shift Kit from Transtar (part number
T124442RK) addresses both shift and torque-converter issues, the company said. The kit
includes a pressure-switch repair kit, which is also available
separately.
©Transmission Digest ePowertrain Products 2014
1
Mercedes 722.8 Clutch Plates
JF613E/W6AJA/F6AJA Overhaul Kits
Alto Products Corp. now offers the complete series for the
Mercedes 722.8 ECVT 2004-up. The plates are available as
a complete friction or steel module, Alto # 076752 or
076753, or as individual plates.
Precision International now offers overhaul, banner and
master kits for JF613E/W6AJA/F6AJA. Kits are available
with or without pistons. Applications include 2007-12
Mitsubishi Outlander (US); 2008-12 Mitsubishi Lancer
(non-US); 2007-12 Nissan Qashqai and X-Trail (non-US);
2007-12 Renault Espace (non-US); 2008-12 Koleos; 200712
Laguna/Coupe;
2008-12
Megane; and
2006-12
Scenic/Grand
Scenic, the company said.
CD4E Transmission Band
Ford, GM Oversized TCC-Control-Valve Kits
BorgWarner’s recently released CD4E INT/OD band, Part
No. 50226BW, includes high-energy friction material and
additional oil slots for better cooling. It is used in high-output applications and retrofits to all applications, the company said.
Sonnax has two new oversized TCC control-valve kits to
correct multiple TCC issues and converter apply/release
concerns due to excess wear at the TCC control-valve bore.
Featuring hardcoat anodized aluminum valves to combat
premature wear, these kits restore hydraulic integrity for renewed TCC, lubrication and cooler operation, according to
the company. Kit 144510-07K fits Ford 6F35 units, and
144510-05K is
for use in firstand secondgeneration GM
6T40/45/50
units.
Jack Safety Stands
Daihatsu A4L Overhaul Kit
These jack safety stands offered by Transtar (part number
T1003) feature a four-legged steel base with pads for stability and a ductile-iron support column with ratchet teeth for
multiple height positions. Its self-locking handle and pawl
secure the column in place, and its large saddles with locating lugs provide support, the company said. The six-ton-capacity saddle also includes
a recess for acceptance of a
vehicle panel rail.
TransTec® now has available overhaul kit DP2632 to service the A4L FWD/AWD four-speed step transmission. This
transmission is found in various Daihatsu, Perodua and
Subaru vehicles in model years 2001-2014. Featured subkits and components
include the overhaul
kit, sealing-ring kit,
Durapene pan gasket, converter-hub
seal, manual-lever
seal and axle seals.
©Transmission Digest ePowertrain Products November 2014
2
DPS6/6DCT250 Overhaul Kit
Allison 1000 4x4 H.D. Output Shaft 2011-Up
New TransTec® overhaul kit 2636 covers the
DPS6/6DCT250 dry-dual-clutch six-speed transmission.
Applications include various Ford, Nissan/Datsun, Qoros,
Renault and Samsung vehicles in model years 2010-2014.
Featured components include the overhaul kit, axle seals,
inner and outer input-shaft seals and manual-lever seal, the
company said.
TCS Products has released the Allison 1000 heavy-duty 4X4
output shaft for 2011-up transmissions. This shaft is made
in house from 300M billet steel, designed for heavy-towing
and competition applications. This output shaft is an ideal
product for those who challenge their vehicles at work and
play and delivers superior strength, according to the company.
ZF 9HP48 Overhaul Kits
Spicer 75W-90 Gear Oil
Precision International now has available overhaul, banner
and master kits for ZF 9HP48. This nine-speed unit is used
in vehicles including 2015 Chrysler 200 six-cylinder; 2015
Acura TLX 3.5L, MDX 3.5L and RDX; 2015 Honda Pilot and
Odyssey; and 2014 Land Rover Evoque. Kits are available
with or without pistons, the company said.
Spicer 75W-90 gear oil from Transtar (part number
M465GA-1) is a full-synthetic product engineered for maximum service life. This gear oil will help protect your rebuilds, the company said.
BVGA/BYBA, MGHA 3rd-Gear Piston Kit
Auto TECH expo 2015
A new Honda third-gear piston kit designed as an economical way to service Honda transmissions is now available
from Capital Core Inc. The piston kit, which services BVGA,
BYBA and MGHA transmissions, comes complete with the
piston (A20965E),
retainer (A20985E),
snap ring
(D90862E) and
spring (A20975E)
and is designed for
pistons with a
4.865-inch outside
diameter, the company said.
Jacksonville, FL March 12 - 14
©Transmission Digest ePowertrain Products November 2014
3
6T40/45/50 Pressure-Switch Rebuild Kit
XA-10LN CVT Overhaul Kit
First-generation GM 6T40, 6T45 and 6T50 transmissions
often exhibit various trouble codes and shift irregularities
related to the transmission electro-hydraulic control module (TEHCM). Previously, the only solution was to replace
the entire TEHCM. Sonnax’s patent-pending pressureswitch rebuild kit 144510-09K allows you to salvage the
TEHCM while effectively restoring normal switch operation,
eliminating codes and providing renewed shift performance, the
company
said. The kit
installs easily with no
special tools
required.
Now available from TransTec®, overhaul kit 2650 services
the XA-10LN continuously variable transmission. This unit
appears in various Daihatsu, Subaru, Suzuki and Toyota vehicles in model years 2000-2014. Featured sub-kits and
components include a sealing-ring kit, pan gasket, axle
seals, manual-lever seal
and converter seal, the
company said.
Ford 6F50 Transmission PTU Seal Kit
ZF 8HP55AF Overhaul Kits
Transtar now carries the seal kit (part number D1240001A)
for the power-transfer unit used in Ford all-wheel-drive vehicles with 6F50 transmissions. Fluid breakdown and leaks
can be repaired with this kit, according to the company.
Precision International now has available overhaul, banner
and master kits for ZF 8HP55AF. This transmission is used
in various 2009-2013 Audi models including A4, A5, A6,
A7, A8/S8, Q5 and allroad. Kits are available with or without
pistons, the company said.
Dodge 5-Clutch ‘Power Pack’
Toyota K310 Friction Plates
TCS Products’ five-clutch power pack for the third-gear
drum in Chrysler A727/A518/A618 units has a billet aluminum clutch piston that is CNC machined to deliver a
more-positive and balanced clutch application over the
OEM cast piston. Stable piston apply and more friction area
provide greater
performance and
durability, according to the
company. The kit
comes with
Raybestos frictions and steels.
Alto Products Corp. now offers friction plates for the
Toyota K310 CVT friction module. The plates are available
as a complete friction module, Alto # 186752A, or as individual plates.
©Transmission Digest ePowertrain Products November 2014
4
XA-15LN CVT Overhaul Kit
Toyota AB60E/F Speed Sensor
New TransTec® overhaul kit 2651 services the XA-15LN
continuously variable transmission used in various Mazda,
Subaru and Toyota vehicles in model years 2003-2014. It
includes a sealing-ring kit, pan gasket, axle seals, manuallever seal and converter seal.
The Toyota AB60E/F transmission speed sensor available
from Transtar (part number A157436) is designed for 2007
and later models. The unit uses two of these sensors – one
for input and one for output.
Toyota K310 Steel Plates
4L80-E Transmission Band
Alto Products Corp. now has available steel plates for the
Toyota K310 CVT steel module. The plates are available as a
complete steel module, Alto # 186753A, or as individual
plates.
BorgWarner has released the 4L80-E High Energy front flex
band 99+, Part No. 50236BW, into the aftermarket.
ZF 8HP70/X Overhaul Kits
6T40/45/50 Oversized Clutch Boost Valve
Precision International now has available Overhaul, banner
and master kits for ZF 8HP70/X. Kits are available with or
without pistons. Applications include Aston Martin DB9
2013-14; BMW 4 Series 2013-14, 5 Series 2011-13, 6
Series 2012-14 and 7 Series 2010-14; Jaguar F-Type 201314, ZF 2013-14, XK2013-14 and XJ 2013-14; Land Rover
LR3 2011-14;
Range Rover/Sport
2012-14; and
2014 Ram 1500 V8 and 2500.
Wear in the 1-2-3-4 clutch boost-valve bore can result in
harsh shifts, slipping, burned clutches, flares and delayed
engagement in first-generation GM 6T40, 6T45 and 6T50
transmissions. Engineered to perform to OE specification
and protect against premature wear, the new Sonnax oversized clutch boost valve 144740-22 restores proper hydraulic control and ensures trouble-free shifting, the
company said.
©Transmission Digest ePowertrain Products November 2014
5
Audi 01J CVT Pressure-Control Solenoid
48RE Banner Kit
This pressure-control solenoid from Transtar (part number
A33420B) is used in three locations in 2000-13 models of
the Audi 01J CVT.
Whatever it Takes now sells a banner kit for the 2003-up
48RE transmission. The kit includes an overhaul kit with
molded rubber pan gasket and Raybestos GPZ overdrive direct friction plates, the company said.
Ford 6R80 Overhaul Kits
Ford 6F35 Overhaul Kits
Precision International now offers overhaul, banner and
master kits for the 2009-14 6R80. The overhaul kit is part
number KP37900KA, the banner kit is KP3700KAW/O and
the master kit is KP3700KA. No pistons are available yet,
the company said. Applications include Ford Everest,
Expedition, F-150, Mustang, Ranger and Transit; Lincoln
Navigator; and Mazda BT-50.
Overhaul, banner and master kits for 2013-up Ford 6F35
are now available from Precision International.
Applications include 2013-14 Ford Edge, Escape, Explorer,
Fusion and Taurus with four-cylinder engines. Kits are offered with or without pistons, the company said.
©Transmission Digest ePowertrain Products November 2014
6
`