SPRAYER - MEYCO VERSA Atlas Copco Technical specification concrete spraying equipment

Atlas Copco concrete spraying equipment
SPRAYER - MEYCO VERSA
Technical specification
The MEYCO VERSA is the all-in-one concrete spraying mobile for
mid-size civil engineering tunnels. It comes equipped with Atlas
Copco MEYCO’s Mezza boom for even more stable spraying.
Standard features
»»Concrete spraying pump
•Suprema double piston pump with MEYCO Push-over
system for minimum pulsation
•Automatic reverse function for pressure relief (blockage)
•Wear optimized components for maximum service life
•Sturdy hopper and grill design for concrete containing fibers
»»Boom
•Telescopic boom MEYCO Mezza with new slide system
»»Dosing system
•Dosa high accuracy dosing system for liquid accelerators
with instant adjustment of accelerator volume with flow
meter and rotor/stator-pump
•Real-time adjustment of accelerator volume
•Auto-stop for accelerator under dosage
•Low maintenance, pulsation free pumping optimized for
alkali free accelerators. Low maintenance, pulsation free
pumping optimized for alkali free accelerators.
»»Spraying system
•Wet mix concrete spraying system
»»Control System
•PLC control system in easy access control box
•Data logging for production data
•RRC Radio Remote control
»»Carrier
•Sturdy, carrier with single-wheel drive (4 ea.) and steering,
including crabwalk, ABS and TCS
•Diesel engine US EPA Tier 4 final, EU stage IV
•Open drivers cabin with protective roof, FOPS and ROPS
•Robust front stabilizers
»»General
•Dual pressure pump for water and High-pressure water
cleaner with hose reel
•LED working lights
•Water and liquid accelerator tank
•Connection for external air supply
•Manual central lubrication for pump unit and boom
(hand pump)
•Concrete release agent hand sprayer
•Portable fire extinguisher
•Toolbox
MEYCO VERSA
Specifications
»»Boom
Working range Mezza
•Max height..................................................................... 9.5 m
•Max width....................................................................... 16 m
•Spraying head movement..........................................120/360°
•Nutation...............................................................................8°
»»Hydraulic system
•Hydraulic pumps.................................................................. 2
•Hydraulic oil tank volume.............................................. 200 l
•Electric motor...............................................................37 kW
•Filtration........................................................................ 10 μm
»»Water System
•High pressure water cleaner........................ 900 l/h at 200 bar
•High pressure water hose................................................ 15 m
•Water pump max capacity .......................... 900 l/h at 200 bar
•Water tank.............................................................. 160 - 180 l
»»Concrete spraying pump / Dosing pump
•Concrete pump capacity.............................. 20 m3/h at 50 bar
(max theoretical)
•Dosing pump max capacity......................... 24 l/min at 10 bar
(hydraulic drive)
•Feeding hopper volume.................................................. 250 l
•Feeding hopper height............................................. 1300 mm
•Pump cylinder.......................................................... ø150 mm
•Hydraulic cylinder..................................................... ø80 mm
•Piston stroke............................................................... 600 mm
•Manual central lubrication for pump unit and boom (hand
pump)
»»Electrical System
•Supply voltage...............................................3x 400 V/50 Hz
•Power with compressor...............................................115 kW
•Power without compressor............................................40 kW
»»Miscellaneous
•Standard accelerator tank................................................ 650 l
•Concrete release agent hand sprayer................................... 5 l
•Diameter of nozzle system.................................... 100/65 mm
•Working lights LED 24 VDC....................................5x 50 W
•Fire extinguishers
»»Carrier
•MEYCO Carrier plattform
•Engine
Deutz 4 cylinder
TD3.6, USE EPA Tier 4, EU stage III B
•Power rating ......................................... 55.5 kW at 2600 rpm
•Torque.................................................... 330 Nm at 1600 rpm
•4-Wheel steering ..................................... ±25° steering angle
•3 Driving modes.............. 4-wheel, front-wheel, crab steering
•Seat 90° sideways for tramming in both directions
•Electronic controlled 4-wheel drive
•Hydrostatic power steering system
•Hydrostatic transmission
•Frame central joint, oscillation........................................±15°
•Rims ....................................................................13.00 x R20
•Tyres ....................................................................16.00 x R20
•Hydraulic stabilizers, front................................................... 2
•Service brakes ..........................................................2 circuits
•Emergency and parking brakes ....................................SAHR
•Fuel tank .......................................................................... 80 l
•Exhaust catalyzer
•Electronic ABS/TCS
•Electric system................................................................24 V
•Batteries .........................................................2x 12 V, 70 Ah
•Tramming lights........................................................4x 70 W
•Brake lights
•Gradability at max. load on drive wheels........................30%
•Horn, and reverse alarm
MEYCO VERSA
Optional Equipment
»»Boom
•Automated central lubrication system VOGEL
»»Air System
•Rotary vane compressor (Mattei) .75 kW, 11.0 m3/
min, 7 bar
»»Water System
•Water hose reel, hydraulic driven hose
100 m
»»Electrical system
•Heater for control box
•Control box stainless steel
»»Carrier
•Fire suppression system
•Hydraulic stabiliziers rear
ANSUL
»»Control system
•Connection cable to RRC Radio Remote Control
»»Miscellaneous
•Heating and insulation of accelerator tank
»»Parts and Services
•VERSA design is based on common spare parts
of existing MEYCO machines
•Maintenance service kits
•Suggested stocking guides
MEYCO VERSA
Measurements
»»Dimensions
•All dimensions are shown in millimetres
00
3920
COVERAGE AREA - MEZZA BOOM
0m
1m
2m
3m
4m
5m
6m
7m
8m
8m
0m
1m
2m
3m
4m
5m
6m
7m
8m
9m
7m
8m
6m
5m
7m
4m
6m
60
3m
5m
°
90
2m
°
1m
4m
3000
0m
3m
90
°
1m
2m
2m
3m
1m
25 °
4m
0m
5m
6m
1m
7m
2m
8m
0m
1m
2m
3m
4m
5m
6m
7m
8m
3m
0m
DIMENSIONS
mm
1m
2m
3m
4m
5m
6m
7m
TRAMMING SPEED
km/h
On flat ground (rolling resistance 0.05)
18
On incline 1:8
7.8
Width
2 200
Width with conveying line
2 200
Height
2 600
Length
7 820
WEIGHT
Ground clearance (with standard tires)
350
gross weight
Hopper filling height
1 300
kg
Total
11 500
Without compressor
10 200
8m
09/2014
R68
R3
500
350
18Ā
12Ā
2600
2200
7820
© Copyright 2014, Atlas Copco MEYCO AG, Winterthur, Switzerland. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos
may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.
TOP VIEW - TURNING RADIUS
9851 6628 01c
SIDE VIEW TRAMMING MODE
`