IMPACT AND ABRASION RESISTANT TRAFFIC DECK COATING SYSTEM APPLICATION TYPICAL PERFORMANCE

04/06
2 Pages
Vulkem 350-SL/345/346
APPLICATION
See the Vulkem Deck Coating application guide for full details.
TYPICAL PERFORMANCE
CHARACTERISTICS
Key Benefits Summary
‰‰ Easy Installation
‰‰ Available in assortment of colours
‰‰ Waterproofing system
PROPERTIES
TEST METHOD
TYPICAL VALUE
Weight Loss
40% Loss Max.
Less than 185
60% Solids Min.
Greater than 82%
Low temperature
Ten cycles, -26 C
Pass - no cracks
Flexibility and
Crack Bridging
Must bridge a
1.6mm crack
Adhesion- in Peel
Concrete
Min. 5 pli20pli
Dry, unprimed)
Plywood
Min. 3 pli 10pli
‰‰ Trafficable
‰‰ UV Stable
PRODUCT INFORMATION
DESCRIPTION
Modified polyurethane Traffic Deck Coating System composed
of a basecoat (350-SL), heavy duty wear coat (345) and a finish
coat (346).
Chemical Resistance (Tensile Retention)
‰‰ Ease of installation giving substantial labour savings.
‰‰ Basecoat can be sprayed, rolled, squeegeed or trowel
applied.
‰‰ Topcoat available in different colours to meet your aesthetic needs.
‰‰ Heavy Duty wear coat can be applied at double thickness
in critical traffic areas for extra protection.
‰‰ UL 790 tested with a Class A Fire Rating
‰‰ Extreme impact and abrasion resistance.
USAGE/PURPOSE
Designed as a waterproof, wear resistant, non-skid deck coating
o
Greater Than
Water
70%
98%
Ethylene Glycol
(Anti-freeze)
70%
97%
Mineral Spirits
45%
85%
Motor Oil
Not included
92%
Hydraulic Brake
fluid
as part of
84%
Deicing Materials
ASTM C-957
99%
7% Detergent
solution
none
100%
Weathering
Not less than
Resistance and
90% recovery
from
Recovery from
Elongation
35%
Elongation
80% Tensile
Retention
95%
90% Elongation
Retention
100%
Abrasion
50mg.
Weight Loss 15mg
Resistance
Max.
Tear Resistance
N/A
95pli
Fire Rating
N/A
UL Rating Class A
system for;
‰‰ Parking decks
‰‰ Roof decks
‰‰ Stadium bleachers
‰‰ Balconies
‰‰ and other areas requiring a durable coating system.
PACK/COLOUR
PRODUCT CODE
18.9L Pails.
Vulkem 345
‰‰ GREY
215400
Vulkem 346
‰‰ SLATE GREY
215422
‰‰ GREY
215410
Vulkem 350-SL/345/346
IMPACT AND ABRASION RESISTANT
TRAFFIC DECK COATING SYSTEM
Vulkem 350SL
‰‰ GREY
215430
TECHNICAL INFORMATION
TYPICAL PROPERTIES
ASTM C 957-87 - Standard Specification for High Solids Content.
Cold applied elastomeric waterproofing membrane with integral
wearing surface.
PRODUCT
D A T A
SHEET
COVERAGE RATES
Vulkem 350-SL - 1.57m2/l for a thickness of 0.64mm Vulkem 345
- 2.63m2/l for a thickness of 0.38mm wet per coat. Broadcast an
equal quantity of sand, yielding a .75mm thick coating. Vulkem
346 Topcoat - 4.9m2/l for a thickness of 0.20mm.
AVALIBILITY
Vulkem 350-SL/345/346 is available through your nearest
Tremco office.
Vulkem 350-SL/345/346
HEALTH & SAFETY PRECAUTIONS
The Material Safety Data Sheet (MSDS) must be read and
understood prior to use.
TECHNICAL SERVICE
TREMCO has a team of qualified Technical Sales Representatives
who provide assistance in the selection and specification of
products. For more detailed information or service and advice,
call Customer Service on (02) 9638 2755 or fax (02) 9638 2955.
GUARANTEE/WARRANTY
TREMCO products are manufactured to rigid standards of
quality. Any product which has been applied (a) in accordance
with TREMCO written instructions and (b) in any application
recommended by TREMCO, but which is proved to be defective,
will be replaced free of charge.
Any information provided by TREMCO in this document in relation
to TREMCO’s goods or their use is given in good faith and
is believed by TREMCO to be appropriate and reliable. However, the
information is provided as a guide only, as the actual use and
application will vary with application conditions which are
beyond our control. TREMCO makes no representation,
guarantee or warranty relating to the accuracy or reliability
of the information and assumes no obligation or liability
in connection with the information. To the extent permitted by
law, all warranties, expressed or implied are excluded.
TREMCO PTY LTD
An
Company
ABN 25 000 024 064
Unit 1, 2 Park Rd, Rydalmere NSW 2116, Australia
P: (02) 9638 2755
F: (02) 9638 2955
[email protected]
www.tremco.com.au
`