Schedule of Accreditation United Kingdom Accreditation Service

Schedule of Accreditation
issued by
United Kingdom Accreditation Service
21 - 47 High Street, Feltham, Middlesex, TW13 4UN, UK
Bureau Veritas Industry (IND) a division of
Bureau Veritas UK Limited
Issue No: 012
0432
Type A
Inspection Body
Issue date: 05 November 2014
Suite 308
Contact: Kyle Veitch / Chris Auger
Fort Dunlop
Tel: +44 (0) 845 600 1828
Birmingham
E-Mail: [email protected]
B24 9FD
[email protected]
[email protected]
Website: www.bureauveritas.com
Accredited to
ISO/IEC 17020:2012
Inspection performed at/from the locations specified below
Locations covered by the organisation and their relevant activities
Location details
Aberdeen
Activity
Jim Maclean/Jonathan
Britain /
Craigshaw Business Park
Craigshaws Road
Tullos
Aberdeen
AB12 3AR
Manchester
A
Onshore Examination
Les Hall/Jonathan
Britain
Control of Design Examination and
Verification Activities: PED, TPED,
ADR,
B
Les Hall/Jonathan
Britain
Transport and Logistics In-Service
Inspection
C
Wilmslow Road
Didsbury
Manchester
M20 2RE
London
Head Office control and management of
key locations.
Control of policies and management
system
Control and retention of records
Location code
66 Prescott St
London
E1 8HG
Assessment Manager: JC1
Page 1 of 8
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
21 - 47 High Street, Felt ham, Mi ddl esex, TW 13 4UN, UK
Burea Veritas Industry (IND) a division of
Bureau Veritas UK Limited
0432
Type A
Inspection Body
Issue No: 012
Issue date: 05 November 2014
Accredited to
ISO/IEC 17020:2012
Inspection performed by the Organisation at/from the locations specified
DETAIL OF ACCREDITATION
Field of Inspection
Type and Range of Inspection
Methods and Procedures
Location
Code
Onshore Examination
In-service inspection and
manufacture of mobile plant for
use offshore.
Well Control Equipment
Sub Surface Equipment
Pressure Vessels (NonPSSR/PED)
Offshore Electrical Installations
Offshore Electrical Machines
Pressurised Modules
Wireline Masts
Frames and Containers – New
Frames and Containers –
Periodic
Standards and industry codes as
appropriate SI 913.
Internal procedures.
A
Transport and Logistics
In-service inspection
Tank containers and their
frames
ITCO - Internal procedures
BS EN 1432:1997
Swap bodies - swap tanks
C
The Carriage of Dangerous
Goods and Use of
Transportable Pressure
Equipment Regulations 2009
(as amended)
Periodic inspection
Intermediate Inspection
Exceptional Checks
VCA Procedures for Inspection &
Testing of UK Tanks
B
Part 3 of the Approved
Derogations and Transitional
Provisions.
EN 12972:2007 Tanks for the
transport of dangerous goods.
Testing, inspection and marking
of metallic tanks
UK Road & Rail tanks*
constructed before 10/05/2004
Class 2, 3, 4, 5, 6, 7, 8 & 9.
With the exception of Class
3F1
Assessment Manager: JC1
Page 2 of 8
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
21 - 47 High Street, Felt ham, Mi ddl esex, TW 13 4UN, UK
Burea Veritas Industry (IND) a division of
Bureau Veritas UK Limited
0432
Type A
Inspection Body
Issue No: 012
Issue date: 05 November 2014
Accredited to
ISO/IEC 17020:2012
Inspection performed by the Organisation at/from the locations specified
Field of Inspection
The Carriage of Dangerous
Goods and Use of
Transportable Pressure
Equipment Regulations 2009
(as amended)
Type and Range of Inspection
Methods and Procedures
Location
Code
Periodic inspection.
Intermediate inspection.
Exceptional checks.
EN 12972:2007 Tanks for the
transport of dangerous goods.
Testing, inspection and marking
of metallic tanks
B
Periodic inspection.
Intermediate inspection.
Exceptional checks.
EN 12972:2007 Tanks for the
transport of dangerous goods.
Testing, inspection and marking
of metallic tanks
B
Conformity assessment
including:
- Type Approval
- Supervision of manufacture
- Initial inspection and test
EN 12972:2007 Tanks for the
transport of dangerous goods.
Testing, inspection and marking
of metallic tanks
B
Part 3 of the Approved
Derogations and Transitional
Provisions.
UK Road Tanks* constructed
after 9 May 2004 to EN12493,
Annex C
The Carriage of Dangerous
Goods and Use of
Transportable Pressure
Equipment Regulations 2009
(as amended)
Road and Rail Tanks
constructed to ADR or RID* for
classes 2, 3, 4, 5, 6, 7, 8 & 9
The Carriage of Dangerous
Goods and Use of
Transportable Pressure
Equipment Regulations 2009
(as amended)
Inspection body procedures.
Road and Rail Tanks
constructed to ADR or RID* for
classes 3, 4, 5, 6, 8 & 9.
Assessment Manager: JC1
EN 13094:2008 + AC:2008
EN 14025:2008
Page 3 of 8
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
21 - 47 High Street, Felt ham, Mi ddl esex, TW 13 4UN, UK
Burea Veritas Industry (IND) a division of
Bureau Veritas UK Limited
0432
Type A
Inspection Body
Issue No: 012
Issue date: 05 November 2014
Accredited to
ISO/IEC 17020:2012
Inspection performed by the Organisation at/from the locations specified
Field of Inspection
The Carriage of Dangerous
Goods and Use of
Transportable Pressure
Equipment Regulations 2009
(as amended)
Type and Range of Inspection
Conformity assessment
including:
- Type Approval
- Supervision of manufacture
- Initial inspection and test
Road and Rail Tanks
constructed to ADR or RID* for
Class 2
Methods and Procedures
Article 12 of the Directive
2010/35/EU +1.8.7 of the
Annexes 2008/68/EC
Location
Code
B
EN 12972:2007 Tanks for the
transport of dangerous goods.
Testing, inspection and marking
of metallic tanks
EN 12252:2005 +A1:2008
EN 12493: 2008, (except Annex
C)
EN 12493:2008 +A1:2012
(Except Annex C),
EN 13530-2: 2002 + A1: 2004
EN 13807:2003
EN 14025:2008
EN 14398: 2003 - (Except table
1)
Technical codes recognised by
the UK competent authority
ASME VIII: Division 1
ASME VIII: Division 2
CODAP 2000
AD 2000 (Merkblatt)
PD 5500:2009 +A2:2010
The Carriage of Dangerous
Goods and Use of
Transportable Pressure
Equipment Regulations 2009
(as amended)
Road and Rail Tanks
constructed to ADR or RID* for
Class 2
Assessment Manager: JC1
Conformity Reassessment
including:
Article 13 + Annex III of the
Directive 2010/35/EU:
B
EN 12252: 2005 +A1:2008
EN 12493: 2008 (Except Annex
C)
EN 12493:2008 +A1:2012
(Except Annex C),
EN 13530-2: 2002 + A1: 2004
EN 13807:2003
EN 14025:2008
EN 14398: 2003 (Except Table 1)
Page 4 of 8
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
21 - 47 High Street, Felt ham, Mi ddl esex, TW 13 4UN, UK
Burea Veritas Industry (IND) a division of
Bureau Veritas UK Limited
0432
Type A
Inspection Body
Issue No: 012
Issue date: 05 November 2014
Accredited to
ISO/IEC 17020:2012
Inspection performed by the Organisation at/from the locations specified
Field of Inspection
The Carriage of Dangerous
Goods and Use of
Transportable Pressure
Equipment Regulations 2009
(as amended)
Type and Range of Inspection
Methods and Procedures
Location
Code
Conformity assessment;
Type Approval Initial
inspection and test
EN 12493: 2008, Annex C
EN 12252: 2005 +A1:2008
B
Periodic in-service inspection
EN 14876:2007
Periodic inspection & testing of
welded steel drums
EN 14189:2003
Inspection and maintenance of
cylinder valves at time of periodic
inspection of gas cylinders.
B
Part 3 of the Approved
Derogations and Transitional
Provisions.
UK Road Tanks* for Class 2
The Carriage of Dangerous
Goods and Use of
Transportable Pressure
Equipment Regulations 2009
(as amended)
Old Pressure Receptacles*
EN1251-3: 2000
Cryogenic vessels
Transportable Pressure
Receptacles*
Periodic in-service inspection
including;
Periodic inspection,
intermediate inspection and
exceptional checks
Article 12 of the Directive
2010/35/EU + 1.8.7 of the
Annexes to 2008/68/EC:
B
EN 14876:2007
Periodic inspection & testing of
welded steel drums
EN 14189:2003
Inspection and maintenance of
cylinder valves at time of periodic
inspection of gas
cylindersEN1251-3: 2000
Cryogenic vessels
Assessment Manager: JC1
Page 5 of 8
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
21 - 47 High Street, Felt ham, Mi ddl esex, TW 13 4UN, UK
Burea Veritas Industry (IND) a division of
Bureau Veritas UK Limited
0432
Type A
Inspection Body
Issue No: 012
Issue date: 05 November 2014
Accredited to
ISO/IEC 17020:2012
Inspection performed by the Organisation at/from the locations specified
Field of Inspection
Type and Range of Inspection
The Carriage of Dangerous
Goods and Use of
Transportable Pressure
Equipment Regulations 2009
(as amended)
Conformity assessment
including:
- Type approval.
- Supervision of manufacture.
- Initial inspection and test,
- Surveillance of applicant’s inhouse inspection service
Transportable Pressure
Receptacles*
Methods and Procedures
Article 12 of the Directive
2010/35/EU + 1.8.7 of the
Annexes to 2008/68/EC:
84/525/EEC - Seamless
Cylinders
EN 13293: 2002
ISO 9809-1: 2010
ISO 9809-2: 2010
ISO 9809-3: 2010
UN Tanks
EN ISO 11120
ISO 9809-1: 1999
ISO 9809-2: 2000
ISO 9809-3: 2000
ISO 21029-1 2004
The Carriage of Dangerous
Goods and Use of
Transportable Pressure
Equipment Regulations 2009
(as amended)
Transportable Pressure
Receptacles*
Reassessment of conformity
B
B
B
Article 13 + Annex III of the
Directive 2010/35/EU:
EN13293: 2002
B
ISO 9809-1: 2010
ISO 9809-2: 2010
ISO 9809-3: 2010
UN Tanks
EN ISO 11120
ISO 9809-1: 1999
ISO 9809-2: 2000
ISO 9809-3: 2000
ISO 21029-1: 2004
Assessment Manager: JC1
Location
Code
B
Page 6 of 8
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
21 - 47 High Street, Felt ham, Mi ddl esex, TW 13 4UN, UK
Burea Veritas Industry (IND) a division of
Bureau Veritas UK Limited
0432
Type A
Inspection Body
Issue No: 012
Issue date: 05 November 2014
Accredited to
ISO/IEC 17020:2012
Inspection performed by the Organisation at/from the locations specified
Field of Inspection
The Carriage of Dangerous
Goods and Use of
Transportable Pressure
Equipment Regulations 2009
(as amended)
Gas Cartridges *
Type and Range of Inspection
Conformity assessment
including:
Type approval.
Initial inspection and test.
Supervision of manufacture.
Surveillance of applicant’s inhouse inspection service.
Methods and Procedures
Article 12 of the Directive
2010/35/EU + 1.8.8 of the
Annexes to 2008/68/EC
Location
Code
B
ADR/RID 6.2.6
UN2037 to EN417
Note: The inspection of items marked thus * are subject to legislative requirements including the
appointment of ‘persons’ to carry out inspections. Reference should be made to the VCA Dangerous
Goods Office for information on this and listings of bodies recognised under UK legislation.
Pressure Receptacles
New Construction Verification
Seamless steel receptacles
TPSR Issue 1 - Cylinders for oil
well samples
GM/RT 2101 -1996
CoP 2:2004
B
Boiler, Pressure Vessels,
Pipework and associated
equipment
Design verification and new
construction inspection
National and International codes
and Standards
B
END
Assessment Manager: JC1
Page 7 of 8
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
21 - 47 High Street, Felt ham, Mi ddl esex, TW 13 4UN, UK
Burea Veritas Industry (IND) a division of
Bureau Veritas UK Limited
0432
Type A
Inspection Body
Issue No: 012
Issue date: 05 November 2014
Accredited to
ISO/IEC 17020:2012
Inspection performed by the Organisation at/from the locations specified
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant
requirements of ISO EN45011
Directive/Regulation
Conformity Assessment
procedure/Module/Article
Category of
products or
individual products
Methods / Procedures
Essential
requirements:
Product specification/
Properties / Standards
Pressure Equipment Directive
97/32/EC implemented by;
Directive: Article 10:Annex I &
III
Regulation: 12 - Schedule 4
All descriptions of
pressure equipment
and assemblies
covered by the
Regulations.
Inspection Body
Procedures
Approval of permanent joining
procedures and personnel
Categories II III and
IV
Inspection Body
Procedures
Directive: Article 11
Regulation: 17 - Schedule 7
Issuing European
Approval of Materials
Inspection Body
Procedures
Pressure Equipment
Regulations
1999 (SI 2001)
Conformity Assessment
Modules
A1, B, B1, C1, D, D1, E, E1, F,
G, H, H1
Directive: Article 13: Annex I
Regulations: Schedule 2 –
3.1.2
Note: The inspection of items marked thus * are subject to legislative requirements including the
appointment of bodies’ to carry out conformity assessment. Reference should be made to the relevant
Government Departments BIS for PER and SPV for information on this and listings of bodies recognised
under UK legislation
END
Assessment Manager: JC1
Page 8 of 8
`