Document 412557

November
Toll Free Tel: 1300-130-718
Toll Free Fax: 1300-130-719
2014
E-mail: [email protected]
Website: www.horseley.com.au
SHOFU AMALGAM POLISHING
KITS
These abrasives are
0308 Kit RA ... $49.50
0309 Kit FG ... $49.50
Buy 5 get 1 FREE
impregnated with
polishing ingredients
to provide fast, brilliant
results without pumice
or tin oxide.
The kit includes three
each Brownie cups and
mini-points, two each
Greenie cups and
mini-points, one each
Supergreenie cup and
mini-point. Cups are for
proximals,
Mini points for occlusals.
Buy 5 get
1 FREE
This kit is designed for finishing and polishing
all types of composite materials. It has two
Dura-Green and two Dura-White stones, six
CompoSite points, and one each Composite
Fine cup and disk.
0505 Super Snap Mini Kit RA .... $49.50
Buy 5 get 1 FREE
SHOFU ACRYLIC CONTOURING
AND FINISHING KIT HP
0329
Acrylic Kit HP
$126.50
0306 Kit RA ... $49.50
0302 Kit FG ... $49.50
0303 Kit HP ... $49.50
0304 Kit RA ... $49.50
Buy 5 get
1 FREE
Buy 5 get
1 FREE
Buy 5 get
1 FREE
For finishing and superpolishing cast gold/precious
alloys, this kit includes six Brownie, three Greenie and
three Supergreenie polishing points in KN7, PC2 and
WH6 shapes.
SHOFU ENAMEL AND PORCELAIN
ADJUSTMENT KITS HP/RA
This kit is designed for finishing interproximal
and subgingival composite fillings. It has six
Dura-Green and six Dura-White stones in CN1
and FL2 shapes.
• Design for adjustment and polishing of acrylic
dentures and appliances chairside or in the
laboratory
• The kit includes 8 Silicone Acrypoints and 4
Robot Carbide Burs for fast, smooth adjustment
and polishing
SHOFU NP ALLOY
ADJUSTMENT KIT HP
The Enamel Adjustment Kit has
three Dura-White stones for
adjusting natural dentition and
porcelain and nine Ceramisté
points for intra-oral polishing
The Porcelain Adjustment Kit
has three Dura-White stones
for adjusting and nine
Ceramisté points for
polishing at chairside.
Buy 5 get 1 FREE
SHOFU GIC POLISHING KIT
0323
GIC Kit RA/FG
$59.95
0311
Alloy Adjustment Kit HP
$49.50
Buy 5 get
1 FREE
Designed for chairside adjustment of nickel-chrome
or chrome-cobalt prosthesis and for polishing
adjusted surfaces, this kit has ten Lab Series White
stones for adjusting and two Hardie mounted points
for finishing and polishing.
SHOFU PORCELAIN VENEER KIT
Designed by Dr. George A. Freedman, this kit contains
an optimal selection of instruments to assist the practitioner
in all aspects of porcelain veneer placement: one regular-grit
and two fine grit FG Robot diamond points, three T&F-grit
Hybrid points, two CA Dura-White stones, six CA Ceramiste
points, and two CA Ceramisté cups.
0300 Kit RA/FG … $99.55
will not gouge or
discolour composite
• Improved mandrel
design
• For safe, fast polishing
without changing or
inverting discs
0310 Kit RA
$49.50
SHOFU COMPOSITE
FINISHING KITS
RA/FG
SHOFU GOLD POLISHING KITS
HP/RA
0307 Enamel Kit RA ..... $49.50
0301 Porcelain Kit HP .. $49.50
SHOFU 0505 SUPER-SNAP
MINI KIT
• No metal centre,
SHOFU COMPOSITE
POLISHING KIT RA
Buy 5 get 1 FREE
Buy 5 get
1 FREE
Specially selected assortment of T&F Hybrid
Points, Dura white stones, Composite and
Ceramiste polishers for finishing and
polishing of Glass Ionomer and Composite
restorations
SHOFU PORCELAIN LAMINATE POLISHING KITS
RA/FG
Designed by Dr. Ronald E.
Goldstein, this kit has fourteen assorted
Ceramisté cup and Midi-point shapes
for complete polishing.
0317 Kit RA ... $66.55
0318 Kit FG .... $66.55
Buy 5 get 1 FREE
HORSELEY DENTAL SUPPLIES PTY. LTD A.B.N. 31 003 904 461 Unit 41, 10 Straits Avenue, South Granville, NSW 2142
Abrasives and Polishing Materials
IMPROVED SUPER-SNAP SYSTEM
The new improved Super-Snap system has made an evolution to perfection.
The number of polishing steps has been reduced and the range of grits has
been expanded. For optimal safety in polishing, the discs do not have metal
centres, and the shanks are protected for maximum safety when working
interproximally. The final polishing discs are double-sided, giving you
maximum convenience and performance. The redesigned mandrel holds the
discs firmly to ensure a safe grip. Finishing and polishing of composite has
never easier and now Super Snap Ultra-thin, colour-coded discs indicate the
grit and function to take you step-by-step to the finest restorations you can
achieve. In addition, colour-coded polystrips have been added to complete
the evolution of the new Super Snap Technique Kit.
• Thin, double-sided Discs
(only for fine & super fine grits)
• Thin Polystrips
• Improved Mandrel Design
• New Kit Design
Interproximal finishing and polishing strips.
Colour coded: Black/Violet (Coarse/Medium grits)
Green/Red (Fine/Superfine grits)
For safe, fast polishing without
changing or inverting discs
Holds discs firmly for maximum control
• No Metal Centre
Will not gouge or discolour composite
• New Black Coarse Disc
Uniform (coarse grit) particles for fast,
smooth composite contouring.
BLACK Coarse Grit
(for contouring)
VIOLET Medium Grit
(for finishing)
GREEN Fine Grit
Semi-circular design for convenient access and easy
identification of different grits of discs & strips.
• More Disks
New kit contains 180 Disks (3 times more than
the previous kit)
RED Superfine Grit
(for super polishing)
(for polishing)
L-506
Black
L-508
Violet
L-528
D. Violet
L-501
Green
actual
L-502 size
Red
L-507
Black
L-509
Violet
L-522
Violet
L-519
Green
L-521
Red
L-525 Black/Violet (Coarse/Medium)
KITS
0500 Super-Snap Complete Kit CA .............. $126.50
0505 Super-Snap Mini Kit CA .......................... $49.50
Polystrip Coarse and Medium100 pcs/box ... $27.50
Polystrip Fine and Superfine100 pcs/box ..... $27.50
L-526 Green/Red (Fine/Superfine)
REFILLS
Super-Snap Refills, 50 pcs/box .............. $27.50
Super-Snap Mandrel, 6 pcs/box ............ $33.55
Dura-White Stone, 12 pcs/box ............... $39.60
Composite Silicone Point, 12 pcs/box .. $49.50
PN 0500 SUPER-SNAP COMPLETE KIT CA
Contents: 180 Super-Snap Disks
2 CA Mandrels
40 Polystrips
2 Dura-White Stone CA
1 Composite Fine Point CA
Buy 5 get 1 FREE Buy 10 get 3 FREE
Buy 20 get 8 FREE Buy 40 get 20 FREE
(same item)
SHOFU POLYSTRIPS
Size: 178 mm x 3.5 mm
Available in: L-525 - Coarse and Medium (Black/Violet)
L-526 - Fine and Superfine (Green/Red)
L-526
Fine/Superfine
L-525
Coarse/Medium
SHOFU COMPOSITE
POLISHERS CA
0322 Composite
Technique Kit CA
12 pcs/box ... $66.55
L-525 Coarse and Medium, 100 pcs/box .. $27.50
L-526 Fine and Superfine, 100 pcs/box .... $27.50
Buy 5 get 1 FREE
Buy 10 get 3 FREE
Buy 20 get 8 FREE
Buy 40 get 20 FREE
actual size
Composite Silicone
Points RA/FG
12 pcs/box ... $49.50
Shape
CompoSite Polisher RA
Aluminium oxide (40µm)
CompoSite Polisher FG
Aluminium oxide (40µm)
CompoSite Fine Polisher RA
Zirconium (20µm)
CompoSite Fine Polisher FG
Zirconium (20µm)
Bullet
Knife
Wheel
0191RA 0192RA 0193RA
0291RA 0292RA 0293RA
Disk
0194RA
0294RA
Cup
Pear
0195RA 0196RA
Inverted Cone
Midi
0197RA 0198RA
196BFG
0199FG
0295RA 0296RA
0297RA 0298RA
296BFG
0299FG
Indication: For perfect polishing of anterior and posterior composite restorations without scratching surrounding
tooth structure. Final polishing can be obtained easily without ditching the restorative material.
Specification: Available in two grits and 8 different shapes as follow:
CompoSite Polisher – Aluminium oxide (approx. 40 microns)
CompoSite Fine Polisher – Zirconium (approx. 20 microns shank marked with colour band)
Buy 5 get 1 FREE Buy 10 get 3 FREE Buy 20 get 8 FREE Buy 40 get 20 FREE
(same item)
2
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719
Abrasives and Polishing Materials
SHOFU ONEGLOSS ONE-STEP COMPOSITE FINISHERS AND POLISHERS
THE ONEGLOSS FEATURES AND BENEFITS
The OneGloss system works on all composites just by altering contact pressure
Features
Just compare OneGloss to the competition:
• It’s proven to be more durable
• It finishes and polishes better in just one-step
• It’s intended for single use (but is durable
enough to last through an entire treatment)
• It costs 50% less than comparable brands
• It allows you to switch from finishing to
polishing by simply altering contact pressure
0180 OneGloss Complete Set CA .............................. $115.50
(20 Cups, 20 Midi points, 20 Inverted Cone & 3 Mandrels)
0181 OneGloss Cup Refill 50 pcs/box .......................... $66.55
0182 OneGloss Midi Refill 50 pcs/box .......................... $66.55
0183 OneGloss Inverted Cone Refill 50 pcs/box ........ $66.55
OneGloss Mandrel CA 6 pcs/box ................................. $33.55
Benefits
One Stop /One Step
• Finishes & Polishes in one step
• Reduces patient chair time
• Eliminates additional polishing steps
Disposable
• Reduces sterilization cycles
• Reduces clean-up between patients
Multi-Uses
• Finishes & Polishes composite restorations
• Removes excess resin cement on tooth surface
without marring enamel
• Removes orthodontic cement after debanding &
bracket removal
• Removes stains from teeth
• Polishes enamel after scaling
Buy 5 get 1 FREE Buy 10 get 3 FREE
Buy 20 get 8 FREE Buy 40 get 20 FREE
(same item)
SHOFU SILICONE MIDI-POINTS UNMOUNTED
• For finishing enamel and composite restorations as well as stain and adhesive removal
• No metal centre, to prevent discolouring of the restoration
• Operating speed 3,000 - 10,000 r.p.m.
• Available in 25 pieces with OneGloss mandrel supplied
Silicone Point Midi Unmounted
25 pcs/box … $49.50
Buy 5 get 1 FREE Buy 10 get 3 FREE
Buy 20 get 8 FREE Buy 40 get 20 FREE
SHOFU 0505 SUPER-SNAP MINI KIT
SHOFU 0950
HYBRID T & F KIT FG
• No metal centre, will not gouge
or discolour composite
• Improved mandrel design
• For safe, fast polishing without
changing or inverting discs
• 25 micron trimming & finishing diamond burs
FG for composites, enamel and porcelain
0950 Hybrid T & F Kit FG
$66.55
0505 Super Snap Mini Kit RA .... $49.50
Buy 5 get 1 FREE Buy 10 get 3 FREE
Buy 20 get 8 FREE Buy 40 get 20 FREE
Buy 5 get 1 FREE
SHOFU COMPOSITE POLISHING KIT CA
SHOFU COMPOSITE
FINISHING KITS CA/FG
0310 Composite Polishing Kit RA
each $49.50
0306 Kit RA ... $49.50
0302 Kit FG ... $49.50
Buy 5 get 1 FREE
Buy 5 get 1 FREE
This kit is designed for finishing and polishing all types of composite
materials. It has two Dura-Green and two Dura-White stones,
six CompoSite points, and one each Composite Fine cup and disk.
This kit is designed for finishing interproximal and subgingival composite fillings.
It has six Dura-Green and six Dura-White stones in CN1 and FL2 shapes.
fine finishing enamel, composites and porcelain, nothing exceeds the
SHOFU DURA-WHITE® For
performance of the Dura-White Stones.
STONES RA AND FG Made of micrograined aluminium oxide grits, each stone is perfectly
balanced to provide vibration-free performance.
Dura White Stones
12 pcs/box RA or FG
$39.60
actual size
RA/HP
SHAPES
Shape
RA Order No
HP Order No
Buy 5 get 1 FREE Buy 10 get 3 FREE
Buy 20 get 8 FREE Buy 40 get 20 FREE
actual
size
FG SHAPES
CN1
0221
0201
FL1
0222
N/A
FL2
0223
0203
FL3
0224
0204
IC4
0225
N/A
RD1
0227
0207
RD2
0228
0208
RE1
0229
0209
TC1
0230
0210
TC4
N/A
0211
Shape
FG Order No
CN1
0241
FL1
0240
FL2
0244
RD1
0247
RD2
0248
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719
TC1
0249
3
Sundries
SHOFU DURA-GREEN®
STONES RA AND FG
Made of high quality silicone carbide grits, Dura-Green Stones
are exceptional for fast contouring and finishing porcelain,
composites, gold, silver and amalgam. These concentric, fast
cutting stones come in CA and FG shank sizes.
actual
size
RA SHAPES
RA Shape CN1
Order No 0052
FG SHAPES
actual
size
Dura Green Stones,
12 pcs/box RA or FG
$39.60
CY1
0055
FL1
0059
FL2
0060
FL3
0061
IC3
0066
FG Shape
Order No
RD1
0082
CN1
0101
CY2
0103
#24
FG24
FL2
0104
Buy 5 get 1 FREE
Buy 10 get 3 FREE
Buy 20 get 8 FREE
Buy 40 get 20 FREE
RA Shape RD2
Order No 0083
RD3
0084
RD4
0085
RE1
0086
TC1
0089
WH3
0095
WH4
0096
FG Shape
Order No
RD1
0107
RD2
0108
TC1
0109
SHOFU BROWNIE®/GREENIE®/SUPER-GREENIE®
SILICONE POINTS RA, FG AND HP
For Amalgam and Cast Alloy. Eliminate the bother of messy pumice and tin oxide.
Use these popular silicone cups, points, disks and wheels that are impregnated with
high quality polishing ingredients for fast, and brilliant finishes on amalgam, gold and
cast alloys. Use our Brownies to achieve a smooth surface, Greenies for lustrous
polish and Supergreenies (with yellow banded shank) for superpolish.
Gold and
Precious Alloy
Polishing
Shape
Amalgam
Polishing
Mini
Bullet
PC2
KN5
KN7
WH6
Floppie
HP Order No. BHP28
RA Order No. 0403
BHP13S
BRA13S
0272
0282
BHP5
0271
0281
0273
0283
0458
Greenies
HP Order No. GHP28
(Lustrous Polishing) RA Order No. 0404
GHP13S
GRA13S
0275
0285
GHP5
0274
0284
0276
0459
0277
0287
0279
Brownies
(Initial Polishing)
Supergreenies
(Super Polishing)
HP Order No.
RA Order No.
actual size
actual size
404B
0278
0288
Brownie
Grits
RA Order No. 0403
FG Order No. 0413
Brownie/
Greenie/
Supergreenie
12 pcs/box
$44.55
SHOFU ARTICULATING PAPERS
• Thickness: 40 microns
• Double sided
• Colour: Blue or Red
120 pcs/box ...$19.80
SHOFU PRO-ARCH 1 ARTICULATOR
• Excellent handling property due to its functional design
• Light weight cast aluminum framework and the functional
elements precision-ground to ensure accurate centric
registration
• Attractive resin coating to provide a durable surface finish
• Optional splitcast magnetic Mounting Plates (PN4084,
PN4085) for fast removal and remounting of models
• Easy to keep centric position.
• Upper jaw can be opened wide up to120º (with closed centric
lock lever) for easy access
• Easy opening and closing of centric lock lever as well as quick
release for separating upper and lower portions of the articulator
Pro-Arch 1 Articulator . $368.50
(without magnetic plates)
4084 Magnetic Mounting Plates
2pcs/pack ........................ $66.55
4
Buy 5 get 1 FREE Buy 10 get 3 FREE
Buy 20 get 8 FREE Buy 40 get 20 FREE
(same item)
Greenie Supergreenie Brownie
0404
404B
0401
0414
414B
0411
Greenie Supergreenie
0402
402A
0412
412A
Buy 5 get 1 FREE Buy 10 get 3 FREE
Buy 20 get 8 FREE Buy 40 get 20 FREE
Buy 5 get 1 FREE
Buy 10 get 3 FREE
Buy 20 get 8 FREE
Buy 40 get 20 FREE
SHOFU HANDY IIA AND HANDY IIM
ARTICULATORS
B
A
• Rigid, lightweight and easy to handle
A. IIA (magnetic plate) Articulator ... $275.00
B. IIM (cast metal) Articulator.......... $275.00
Buy 5 get 1 FREE Buy 10 get 3 FREE
Buy 20 get 8 FREE Buy 40 get 20 FREE
(same item)
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719
Polishers
SHOFU ACRYPOINT HP for acrylic polishing
Quality Features: Silicone polishers for finishing of denture
materials
Dentist: Polishing after contouring adjustments on acrylic
dentures
Technician: Polishing acrylic dentures in critical areas
(i.e. palatal arch) and at acrylic to metal junction
Acrypoint BPI HP 6 pcs/box ....... $44.55
Acrypoint PC2 HP 12 pcs/box .... $44.55
Buy 5 get 1 FREE
Buy 10 get 3 FREE
Buy 20 get 8 FREE
Buy 40 get 20 FREE
0426
0427
0428
Coarse (Dark Grey)
Medium (Brown)
Fine (Light Grey)
actual size
SHOFU CERAMISTE SILICONE POINTS RA, FG AND HP
RA
Shape
Bullet
Knife
Wheel
Cup
Midi-Point
Standard (Pre-polishing) Order No. RA0251
RA0252
RA0253
RA251A
RA253A
(Polishing) Order No. RA0254
RA0255
RA0256
RA254A
Ultra II (Final Polishing) Order No. RA0257
RA0258
RA0259
RA257A
Ultra
0423
0424
0425
HP
FG
Cup
Midi-Point
KN7
PC2
WH6
FG253B
HP0261 HP0262
HP0263
RA256A
FG256B
HP0264 HP0265
HP0266
RA259A
FG257B FG259B
HP0267 HP0268
HP0269
For Porcelain and Enamel. Made specifically for
finishing and polishing porcelain and enamel,
Ceramisté points, cups and wheels provide the
best in silicone technology. In grit gradation, our
Standard points are for finishing, Ultra points
(yellow band) for polishing and Ultra II points
(white band) for superpolishing. Cups and
Midi-Points come in CA and FG shanks.
Ceramisté Points, 12 pcs/box ... $49.50
Buy 5 get 1 FREE
Buy 10 get 3 FREE
Buy 20 get 8 FREE
Buy 40 get 20 FREE
SHOFU CeraMaster® AND CompoMaster® THE NEW DIAMOND IMPREGNATED POLISHERS HP/RA
actual size
actual size
CeraMaster
for Ceramic
CompoMaster
for Composite
Shape
Bullet
Knife
Cup
Mini-Point
RA Order No.
0111C
0112C
0113C
0114C
HP Order No.
0116C
Finishing and polishing RA Order No.
(yellow and white band)
0111
Finishing Coarse
(yellow band)
HP Order No.
0119C
0112
0116
0113
KN7
0117C
WH6
0118C
0114
0119
0117
0118
Shape
Bullet
Knife
Cup
Mini-Point
RA Order No.
0121C
0122C
0123C
0124C
HP Order No.
0126C
Finishing and polishing RA Order No.
(blue and white band)
0121
0122
0123
Finishing Coarse
(blue band)
HP Order No.
0129C
0126
KN7
WH6
0127C
0128C
0127
0128
0124
0129
CompoMaster RA Single Shape, 3 pcs/box ... $59.95
CompoMaster HP Single Shape, 3 pcs/box ... $59.95
CompoMaster RA Assorted, 4 pcs/box ........... $66.55
CeraMaster RA Single Shape, 3 pcs/box .... $59.95
CeraMaster HP Single Shape, 3 pcs/box .... $59.95
CeraMaster RA Assorted, 4 pcs/box ............ $66.55
CompoMaster HP Assorted, 4 pcs/box ........... $66.55
CeraMaster HP Assorted, 4 pcs/box ............ $66.55
(one each bullet, knife, cup and mini-point)
(one each bullet, KN7, WH6 and mini-point)
• Specific designs for polishing porcelain and composite restorations
• Unique blend of silicone and diamond
• A choice of shapes to suite the polishing of all surfaces
• CA and HP shanks for chairside or laboratory use
• A glaze-like polish to porcelain restorations
• A faster and easier method of polishing
• The elimination of expensive and messy polishing pastes
• Cost-effective, long-lasting durable heads.
(one each bullet, knife, cup and mini-point)
(one each bullet, KN7, WH6 and mini-point)
Buy 5 get 1 FREE Buy 10 get 3 FREE
Buy 20 get 8 FREE Buy 40 get 20 FREE
(same item)
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719
5
Diamond Burs FG
SHOFU DIAMOND BURS FG
Comparison on the distribution of Diamond particles and clogging after use
Diamond Retaining Layer
GENTLE ON THE H/P CARTRIDGE
Every Shofu Diamond Point has a very smooth shank
and confor ms strictly to the ISO standards and
specifications in or der to ensure precise fitting to the
handpiece cartridge
411 411M 311 211 311RM 214 114S 114
1311
1411
011 010 013 014 013 012 010 012
4.5
7
4.5
5
8
8
4
3
$4.40 $4.40 $4.40 $5.50 $5.50 $5.50 $5.50 $5.50
INVERTED CONE
After Use
After Use
After Use
* Tested by Shofu Inc. Research and Development Department
ROUND
Medium
(115 microns)
440 340 461R 462R 364R
1440 1340
010 013 015 018 009 011 015
1.6
2
1.7
4.5
0.9
1.2
1.3
$4.40 $4.40 $4.40 $4.40 $4.40 $4.40 $4.40
440SS 440S
013
8
$6.60
For cavity and inlay preparations
SF440
015
1.3
$5.50
Fine (60 microns)
421SS 421S
1421SS 1421S
010 014
2.2
3.5
$4.40 $4.40
321S
1321S
016
3.5
$4.40
440SS 440S
440 461R
1440
010 013 015 009
1.3
0.9
1.2
2
$4.40 $4.40 $4.40 $4.40
For cavity preparations
SURGICAL-EXTRA
LONG SHANK
Coarse (135 microns)
MICRO DENTISTRY
Medium
(115 microns)
Standard Order No. 421M 421 321M 321
Short Shank Order No.
1421
ISO Size 1/10 mm 010 015 016 018
Length (mm)
1
1.5
1.4
1.7
Each
$4.40 $4.40 $4.40 $4.40
Brand B
Before Use
SF114
DOUBLE INVERTED CONE
Brand A
Before Use
ROUND
Superfine (25 microns)
Medium
(115 microns)
Standard Order No.
Short Shank Order No.
ISO Size 1/10 mm
Length (mm)
Each
SHOFU
Before Use
CYLINDER ROUND EDGE
CYLINDER
Medium (115 microns)
One piece quality stainless steel
Special Coating Layer
SHOFU DIAMOND POINTS FG
are made by highly technological
robots under a computer automated
environment that is untouched by
human hands.
Due to this technology every Diamond
Point is guaranteed to have an even
distribution of natural diamond
particles over the working length of a
single piece shank made of the
highest quality stainless steel. This
provides even and effortless cutting.
Superfine (25 microns)
MULTI-COATING TECHNIQUE
Shofu Diamond Points utilize multi-coating techniques
with a special surface treatment for durability and less
clogging,while maintaining cutting effiency.
F440R
C104LL C165R C101X C103X C105RX
007
0.7
$5.50
022 025 017 023 023
12
10
7
10
10
$7.70 $7.70 $7.70 $7.70 $7.70
For minimal invasion
For surgical treatments
Buy 5 pieces of Shofu Hybrid Diamond Burs FG (any mix)
get one New N050 Bur Dispenser (FG or MIX) FREE
FINISHING
Superfine
(25 microns)
(for Bur Dispenser details, please refer below)
Standard Order No. SF217 SF318 SF319 SF416 SF313R SF219 SF265R
Short Shank Order No.
ISO Size 1/10 mm 017 023 014 016 016 019 020
6
2
3.4
4
3.3
5
5
Length (mm)
$6.60 $5.50 $5.50 $5.50 $5.50 $6.60 $5.50
Each
(same number)
AUTOCLAVABLE PLASTIC BUR DISPENSERS
For finishing filling materials
N050-FG, Bur Dispenser
12 FG … $14.85
N050-MIX Bur Dispenser
6 FG + 6 RA … $14.85
Standard Order No. 680C 682C 684C
682S 684S
Short Shank Order No.
ISO Size 1/10 mm 010 012 014
9
9
9
Length (mm)
$5.50 $5.50 $5.50
Each
F414
F414SS
Fine (60 microns)
F414S
Coarse (135 micron)
TISSUE
PROTECTIVE
END CUTTING
Buy 5 get 1 FREE Buy 10 get 3 FREE
Buy 20 get 8 FREE Buy 40 get 20 FREE
N050-FG
Buy 5 get 1 FREE
Buy 10 get 3 FREE
Buy 20 get 8 FREE
Buy 40 get 20 FREE
• Specially designed for cleaning and
COLOURS
Blue
autoclaving of burs
• Locks open or closed for processing Light Blue Green
• Medical grade plastic, autoclavable
Yellow
White
up to 135ºC
Light Beige Lavender
• Size: 75 mm x 35 mm x 10 mm
680F 682F 684F
010 012 014
9
9
9
$5.50 $5.50 $5.50
N050-MIX
For shoulder preparations
SHOFU HYBRID DIAMOND BURS FG (in Carbide Bur Shapes) REGULAR (115 microns)
SHOFU ALL CERAMIC
PREPARATION SET FG
0955 All Ceramic Preparation Set FG
$148.50
Order No. 0901
Carbide Shape
2
0903
4
0905
6
0907
34
0909
35
0911
245
0913
331
0915
556/56
0917
557/57
0919
0921
0923
558/58 700/170 701/171
Hybrid Regular Diamond Bur FG … $4.40
SHOFU HYBRID T&F DIAMOND BURS FG (in Carbide Bur Shapes) SUPERFINE (25 microns)
actual
size
Buy 5 get 1 FREE
The demand for ceramics in dentistry is at an all time high. Newer
ceramic materials available today produce superb ceramic
restorations. This is challenging the dental professional to consider
newer materials, aesthetics, function, and clinical expertise when
preparing an all ceramic restoration. Under the guidance of Dr.
Takao Maruyama of Osaka University, Dr.Yoshihiko Mutobe and
Shofu have developed a new all ceramic preparation system utilizing
ceramic diamond burs to prepare an all ceramic restoration.
Buy 5 pieces of Shofu Hybrid Diamond Burs FG (any mix)
get one New N050 Bur Dispenser (FG or MIX) FREE
Order No. 0925
Carbide Shape 7006
0927
7104
0929
7106
0931
7404
0933
7406
0935
7803
0937
7901
Hybrid T&F Diamond Bur FG … $5.95
6
0939
7903
0941
LT1
0943
LT2
(for Bur Dispenser details, please refer above)
Buy 5 get 1 FREE Buy 10 get 3 FREE
Buy 20 get 8 FREE Buy 40 get 20 FREE
(same number)
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719
Diamond Burs FG
SHOFU
DIAMOND
BURS FG
TAPERED FLAT END
Superfine
(25 microns)
Coarse (135 microns) Medium (115 microns)
Standard Order No. C101 C202
Short Shank Order No.
ISO Size 1/10 mm 017 022
10
5
Length (mm)
$6.60 $5.50
Each
301 301M 201S 201 101S 101 101SR
1101
1201
1301
010 011 016 013 014 016 014 016 014
10
10
7
10
4.5
4
7
3
4
$4.40 $4.40 $4.40 $4.40 $5.50 $5.50 $5.50 $5.50 $5.50
401M
401
Medium (115 microns)
101L 202 202S 103
1101L
018 021 017 022
10
5
5
9
$5.50 $6.60 $6.60 $7.70
SF201 SF101
SF1101
015 015
10
7
$5.50 $5.50
SHOFU DIRECT COSMETIC RESTORATION KIT
TAPERED
FLAT END
ROUND EDGE
(for tooth preparation & finishing)
Standard Order No. 301CR 202CR 201CR 101CR 103CR 206CR 207CR
Short Shank Order No.
ISO Size 1/10 mm 018 021 018 019 023 027 031
4
5
7
10
10
3.5
3.5
Length (mm)
$6.60 $6.60 $6.60 $7.70 $8.25 $8.25 $8.25
Each
SF301CR SF202CR SF201CR SF101CR SF103CR SF206CR SF207CR
018 021 018 019 023 027 031
4
5
7
10
10
3.5
3.5
$6.60 $6.60 $6.60 $8.25 $8.25 $8.25 $8.25
Fine (60 microns)
For hard resin and ceramic
inlay preparations
Superfine (25 microns)
Coarse (135 microns)
Medium (115 microns)
Direct Cosmetic Restoration Kit FG … $66.55
102R 103R 105R 106RD 107RD
F102R F105R
SF102R SF102RD SF106RD SF107RD
017 022 022 021 023
9
9
11.5
9
9
$5.50 $7.70 $8.25 $8.25 $8.25
016 021
9
11.5
$5.50 $6.60
016 018 021 023
9
9
9
9
$5.50 $8.25 $8.25 $8.25
Fine
(60 microns)
TAPERED
ROUND END
ELLIPSE
Standard Order No. 201SR 201R 104R 101R
1201R 1104R 1101R
Short Shank Order No.
ISO Size 1/10 mm 014 016 016 016
10
10
7
7
Length (mm)
Each
$5.50 $5.50 $5.50 $5.50
F201R F104R
SF104R
015 015
7
10
$5.50 $5.50
015
10
$5.50
• Designed by experts in the field of restorative dentistry to
provide efficiency and accuracy during crown and bridge preparation
• Speedy, simple and accurate tooth preparation can be done with
14 kinds of specially selected FG Diamond Points
• Usable for a wide range of crown and bridge preparation work
such as, PFM of full metal crowns and bridges, full ceramic
restorations, Veneers, Inlays and Onlays
• The Diamond Points are hygienically organized in an autoclavable
aluminum bur block for convenient sterilization and replacement
NEEDLE
Standard Order No. 304 204 104 104L 246
1204 1104
Short Shank Order No.
ISO Size 1/10 mm 016 013 016 018 033
10
10
8
6
4
Length (mm)
$4.40 $5.50 $5.50 $6.60 $8.25
Each
Buy 5 get 1 FREE
C & B Preparation Set FG ... $148.50
Fine (60 microns)
FLAME
F204 F104
SF204
012 015
8
10
$5.50 $5.50
010
8
For crown and bridge preparations
$5.50
(feather margin)
316
215S
215
216
115
F215 F216
F1215
013 016
7.5
7.5
$5.50 $5.50
116
013 012 014 017 013 015
4
7.5
7.5
7.5
10
10
$4.40 $5.50 $5.50 $5.50 $5.50 $5.50
Superfine (25 microns)
Medium (115 microns)
WHEEL
144
117
145
019 021 025 032 032 029
3.4
5
7
5
5
4.9
$5.50 $5.50 $7.70 $7.70 $7.70 $7.70
SF217 SF219 SF265R SF145 SF416
017 019 020 029 016
6
5
5
4.9
4
$6.60 $6.60 $5.50 $8.25 $5.50
330
For crown & bridge preparations For crown & bridge preparations
(lingual reduction)
(lingual reduction)
Medium
(115 microns) TORPEDO
Standard Order No. 148 149
Short Shank Order No.
ISO Size 1/10 mm 032 039
5
4
Length (mm)
For crown and bridge preparations
$7.70 $7.70
Each
(occlusal reduction)
Superfine (25 microns)
265R 165R
Medium (115 microns)
319
Medium (115 microns)
Standard Order No.
Short Shank Order No.
ISO Size 1/10 mm
Length (mm)
Each
SF215
012
7.5
For crown and bridge preparations
$5.50
(Knife edge margin)
Medium (115 microns)
LINGUAL
REDUCTION
BARREL
Fine (60 microns)
Medium (115 microns)
Superfine (25 microns)
Medium (115 microns)
Buy 5 get 1 FREE
SHOFU CROWN & BRIDGE PREPARATION SET
Superfine (25 microns)
Medium (115 microns)
For crown and bridge preparations
(heavy chamfer)
Superfine (25 microns)
Standard Order No. C102R
Short Shank Order No.
ISO Size 1/10 mm 018
9
Length (mm)
$6.60
Each
• Specially designed under guidance of Dr. Sushil
Koirala with 8 carefully selected Diamond Burs FG
No. M12P, 3045, 121, 102R, F216, SF104R, SF215
and SF219
• Diamond points are hygiencically organized in an
aluminium bur block for convenient sterilization
and easy replacement
Coarse (135 microns)
TAPERED
ROUND END
For metal inlay preparations
For crown and bridge
preparations
Superfine (25 microns)
212R 213R
150
010 012
6
8
$5.50 $5.50
035
5.7
$8.25
For beveling
INVERTED
CONE WITH
A ROUND TIP
SF150
035
5.7
For full ceramic preparations
$8.25
(occlusal reduction)
230
130
111
025 043 050 045
0.5
0.6
0.7
1.7
$4.40 $5.50 $5.50 $7.70
C111
046
1.8
$7.70 For crown and bridge preparations
(lingual reduction)
Medium (115 microns)
DEPTH
MARKER
Depth
of
cutting
0.5mm
Depth
of
cutting
1.0mm
121
122
026 036
3.6
4
$8.25 $8.25
For depth cutting
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719
7
Beautifil Flow / Injectable
SHOFU BEAUTIFIL FLOW Introducing BEAUTIFIL Flow a new member to the Giomer family of restoratives,
which was created to compliment BEAUTIFIL and further enhance its applications.
In combination with the FL-Bond adhesive system, it gives practitioners and patients a safe,
all-rounded, fluoride-rich restorative system, with superior aesthetics and surface lustre.
Chemistry Behind
Two Distinct Viscosities (F02 & F10)
Every Smile
After several years of research into S-PRG Technology (Surface Pre-Reacted) BEAUTIFILFlow
was developed to give you two distinct viscosities F02 (Low Flow) and F10 (High Flow) while maintaining
the same aesthetics, physical properties, particle size and filler load.
An equal quantity of the two types of BEAUTIFIL Flow was placeed on a glass plate.
The glass plate was then placed vertically to measure the movement of the material (mm) after 1 minute
Buy 5 get 1 FREE Buy 10 get 3 FREE
Buy 20 get 8 FREE Buy 40 get 20 FREE
BEAUTIFIL Flow F02
was created to retain the
shape and have moderate flow,
especially for restoring cervical
areas.
BEAUTIFIL Flow F10 was created
for use where smooth flow is
required, especially for restoring the
gingival box of class II, Pit & Fissure
Sealant and as a cavity liner.
BEAUTIFIL Flow F02
(Low Flow)Low Flow (2g) with 5 pcs
Needle Tips
Shades: A1, A2, A3, A3.5, A4, A3O, G
BEAUTIFIL Flow F10 (High Flow)
High Flow (2g) with 5 pcs Needle Tips
7 Shades: A1, A2, A3, A3.5, A4, A3O, A3T
$33.55 /syringe
$33.55 /syringe
SHOFU BEAUTIFIL FLOW INJECTABLE
Direct Aesthetic Restorative Material
Inject beauty and strength into your restorations with BEAUTIFIL Injectable,
the only universal aesthetic restorative of its kind that comes in an injectable syringe. Chemistry Behind
Every Smile
This novel aesthetic material of the Giomer family has carved a niche in direct cosmetic
dentistry, by offering life-like aesthetics, durability, optimal viscosity and sustained fluoride
protection with the convenience of direct delivery.
Created for
• Class I through Class V direct restorations including marginal ridge of Class II cavities
• Direct Veneers & Core Build-up
• Shade / Shape Modification in direct and indirect aesthetic restorations
• Restoration of Cuspal and Occlusal topography
• Minimally invasive anterior and posterior restorations
• Geriatric and Pediatric Restoration
• Repairing of Composite and Ceramic restorations
• Splinting of Mobile teeth
After
Before
Fractured Central and Lateral Incisors
After
Before
Carious Lower Premolar
Before
After
Restoring Occlusal Anatomy
In a LEAGUE of its own ...
• Ideal viscosity that adopts the desired shape
• Non-tacky nature for ease of application
• Unique resin structure assures optimal cure every time
• Superior mechanical properties enable universal
application
• Efficient injectable delivery to restoration site that
reduces instrumentation and working time
• Life-like optical characteristics for indiscernible
restorations
• Natural Opalescence and Fluorescence
• Proven S-PRG technology provides fluoride rich environment with anti-plaque effect
• Remarkable radiopacity
Life-like Restorations
The filler-matrix complex is optimized for controlled light
diffusion within the material for a more vivid restoration
that blends imperceptibly in the oral environment.
In addition to a natural brilliance, the nano-hybrid filler
structure enables a high gloss polish that retains over
time and resists discoloration.
Photographs courtesy of Dr. Sushil Koirala
Extraordinarily Strong & Durable
The unique resin micro-structure and filler composition of
Beautifil Injectable imparts superior mechanical properties,
high wear resistance and remarkable yield strength to
guarantee a confident anterior and posterior restoration.
Predictable Shades to choose from ...
Beautifil Injectable comes in a range of shades that mimic
the variation in light transmission and diffusion through
enamel and dentin, for a close match to the natural tooth.
Opacious Dentin Shades:
A0.5O, A1O, A2O
Universal Shades:
A0.5, A1, A2, A3, A3.5, A4
Enamel Shade: INC
Bleach White shade: BW
8
Injectable & Stackable
Beautifil Injectable simplifies the entire restoration process as the
material is conveniently delivered to the restoration site, and sculpted
as you extrude. The non-tacky, non-droopy paste has ideal viscosity
and adapts easily to the desired shape, completely eliminating the need
for laborious manipulation during incremental layering of the material.
Order Information
BEAUTIFIL Injectable (Available in 11 shades)
2.2gm, Needle Tips x 5pcs
Beautifil Injectable 2.2gm
$38.50/syringe
Buy 5 get 1 FREE Buy 10 get 3 FREE
Buy 20 get 8 FREE Buy 40 get 20 FREE
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719
Beautifil Flow Plus
F03
BEAUTIFIL Flow Plus
Medium Viscosity
(3mm) Exhibits moderate flow to
restore pits, gingival boxes,
for surface modification and
apply as a base.
Injectable Hybrid Restorative Material
Created with the strength of a hybrid, delivery like a flow
Chemistry Behind
Every Smile
BEAUTIFIL Flow Plus, a novel injectable hybrid direct restorative of the 2nd generation
GIOMER family, breaks new ground in direct restorative dentistry with its superior physical
and mechanical properties for successful posterior as well as anterior application.
This unique formulation represented in two discrete viscosities features exceptional strength,
life-like aesthetics with optimal handling characteristics and continuous fluoride protection
for predictable, long-lasting restorations.
After
Before
F00 High Viscosity (0mm)
Flows on command with exceptional
sculptability for effortless shaping of
occlusal anatomy, marginal ridges
and intricate surface details.
Indications
• Restoration of minimally invasive anterior and posterior cavities
Class I through Class V cavities Deciduous teeth
• Effortless sculpting of detailed cuspal and occlusal anatomy
• Creation of marginal ridge in a Class II cavity
• Repairing composite or ceramic restorations
• Shade adjustment and modification of direct and indirect restorations
Special Features
Natural Aesthetics with Superb Polish
BEAUTIFIL Flow Plus exhibits life-like aesthetics by mimicking
the optical characteristics of natural enamel (light transmission)
and dentin (light diffusion within the material). The basic shades
have been optimized to exhibit a “chameleon effect” as they
harmonize with the surrounding tooth structure without influence
from he background.
Stable Shade Spectrum
BEAUTIFIL Flow Plus features a range of basic and effect shades
to provide individualized aesthetics.
CASE I –
Restorationof
Class l Cavity
Photographs courtesy of
Dr. Ken Kobayashi
Before
During Restoration
CASE II – Recreating
Cuspal Anatomy
of an Abraded Molar
After
Photographs courtesy of
Dr. Sushil Koirala
Creating Marginal Ridge
Sculpting of Cusp Anatomy Final Restoration
BEAUTIFIL Flow Plus has the same proven predictable aesthetic qualities
and shade match as BEAUTIFIL II and BEAUTIFIL Flow for a complimentary
application especially in high end aesthetic cases.
BFF Plus
BFF
F00
F03
F02
F10
A3
A3
A3
A3
BF II
A3
Exceptional Handling Characteristics
The unique balance
of resin and filler
distribution ensures
excellent polish
retained over time for
a lasting enamel-like
lustre.
The 2 distinct viscosities BEAUTIFIL Flow Plus F00 and F03 enable
effective application in a variety of clinical cases.
Flow on Command
Despite its high viscosity, BEAUTIFIL Flow Plus F00 is easy to dispense without
any drag, can be stacked and effortlessly sculpted to perfection.
Unique Syringe Design
Clinical application is further enhanced with a secure pull-back mechanism for
easy dispensing and retrieval of excess material. A Multipurpose Rubber Shield
Cap provides suitable cover during multiple restorations while the 360º colour
coded Rotary Grip enables multi-directional application even in hard to reach areas.
Sustained Caries Protection
BEAUTIFIL Flow Plus has stable S-PRG fillers that are reported to
exhibit an anti-plaque effect while enabling fluoride release and
recharge in response to fluoride concentration in the oral
environment for continuous protection against bacterial colonization.
Remarkable Radiopacity
Radiopacity in a restorative material
helps to evaluate restoration integrity
and diagnose possible secondary
infection.
BEAUTIFIL Flow Plus exhibits
remarkable radiopacity values
of 2.3 Al:mm for ease of
radiographic diagnosis.
BEAUTIFIL Flow Plus F00
F03
BEAUTIFIL Flow Plus F03
– 11 shades
A0.5, A1, A2, A3, A3.5, A4,
A0.5O (Opacious Dentin A0.5),
A1O (Opacious Dentin A1),
A2O (Opacious Dentin A2),
INC (Enamel), BW (Bleach White)
BEAUTIFIL Flow Plus F00
F00
– 12 shades
A0.5, A1, A2, A3, A3.5, A4,
A2O (Opacious Dentin A2),
A3O (Opacious Dentin A3),
INC (Enamel), BW (Bleach White),
MI (Milky), CV (Cervical)
BEAUTIFIL Flow Plus F00
High Viscosity (0mm) Flows
on command with exceptional
sculptability for effortless
shaping of occlusal anatomy,
marginal ridges and intricate
surface details.
$33.55/syringe
BEAUTIFIL Flow Plus F03
BEAUTIFIL Flow Plus F03
Medium Viscosity (3mm)
Exhibits moderate flow to
restore pits, gingival boxes,
for surface modification
and apply as a base.
Buy 5 get 1 FREE
Buy 10 get 3 FREE
Buy 20 get 8 FREE
Buy 40 get 20 FREE
$33.55/syringe
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719
9
Beautifil®
The 2nd Generation Giomer Aesthetic Dental
Restorative Material
BEAUTIFIL II the 2nd generation Giomer light-cure,
fluoride releasing direct aesthetic restorative material was
developed using S-PRG Technology (Surface Pre-Reacted
Glassionomer) to provide superior aesthetics with excellent
shade match, enhanced handling characteristics and anti-plaque
effect while maintaining strength and durability.
Confidence starts here...
Created for …
before
after
before
after
Direct restorations that require
optimum aesthetics and
biocompatibility such as
• Direct cosmetic tooth modifications
• Restoration of Class III, IV,
and V cavities
• Restoration of Cervical erosion
and root caries
• Restoration of Class I and selective
Class II cavities
• Repair of fractured incisal edges
• Laminate veneers and core build-up
Predictable Aesthetics
Create Indistinguishable restorations with
optical characteristics of natural teeth…
before
The BEAUTIFIL II filler structure has been
developed to simulate the internal structure
of natural teeth with ideal light transmission
and optical characteristics.
The moderate translucency and light
transmission of enamel combined with the
light-diffusion of dentin offers predictable
aesthetics with a close shade match to
natural teeth.
Chemistry Behind
Every Smile
after
Photographs courtesy of Dr. Sushil Koirala
Light Source
Photo Cell
Sample
Disk
Diffuse
Transmission
Regular
Transmission
Two Dimensional Goniophotometry
Photograph courtesy of
Dr. Sushil Koirala
Versatility…
Excellent natural shade reproduction can be achieved with
a chameleon effect, using a single shade that blends well
with surrounding teeth making the restoration undetectable.
In aesthetically demanding cases additional shades can be
used to achieve exceptional results.
BEAUTIFIL II is available in 14 shades –
A1, A2, A3, A3.5, A4, B1, B2, B3, C2, C3, Inc, BW and
Opacious Dentin shades (A2O, A3O)
Recommended Use of Shades
The shade guide is made with actual BEAUTIFIL II material and uniquely
designed to simulate the thickness of natural teeth to ensure a precise shade match.
Universal shades – A1, A2, A3, A3.5, A4, B1, B2, C2
Designed specially for the single shade
restorative technique
Fluorescence close
Opacious Dentin shades – A2O, A3O
to natural teeth
Specially created for restoration with
layering technique using multiple shades
Enamel shade-Inc
Unique Incisal shade with high translucency
for aesthetically demanding cases
Bleach White shade – BW
Ideal for restoring bleached teeth
Beautifil II Shade Guide ... $59.95
Exceptional Radiopacity
Shade Stability
Before
After
1.7 times of Enamel and 3 times
higher than Dentin
Negligible difference in shade
before and after curing
Optimum Polishability
In addition to the S-PRG fillers discrete nano fillers (10~20nm) have been included in the filler structure of BEAUTIFIL II to
obtain a filler load of 83.3 wt% for fast and easy polishing with an outstanding surface lustre which retains over time.
Outstanding Handling Characteristics
Excellent handling has been achieved with the inclusion of nano particles making BEAUTIFIL II a user
-friendly material that is easy to sculpt with no slump, non-sticky and wets preparation well with good
thixotropic qualities.
The “One Touch Cap” of the syringe has been enhanced for easy dispensing and delivery during
build-up of restoration.
10
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719
Beautifil®
Anti-Plaque Effect
Conventional Composite Resin
BEAUTIFIL II (with S-PRG filler)
(with no S-PRG filler) proliferated
On the surface of a tooth restored using BEAUTIFIL II a “material film” layer is formed sporadic plaque formation
plaque formation
by saliva that is reported to minimize plaque adhesion and inhibit bacterial colonization.
Although this “material film” layer may be removed by brushing, subsequent layers are
reproduced by saliva therefore S-PRG filler has a function of inhibiting plaque
accumulation.
Dependable Strength and Durability
The internal structure of BEAUTIFIL II with a high filler load ensures long-term stability Photographs courtesy of Prof. Koji Yamamoto of the ASAHI University.
under rigorous intra-oral conditions combined with high flexural strength for universal application.
“Giomer Concept”
Based on the PRG (Pre-Reacted Glass-ionomer) technology where a stable phase of glass- ionomer is formed to incorporate added benefits
such as fluoride release and recharge to the restorative material without causing material degradation.
Physical Properties
• Flexural Strength .............. 130 Mpa Multi-Functional
Properties
• Vickers Hardness .................. 62 Hv Glass
Same hardness
•
Wear
Resistance
..............
0.52
wt%
•
as enamel
Microscopic Technology
• Filler Load ........................ 83.3 wt% • High
[Particle Size Control]
radiopacity,
Acid-Reactive
• Depth of Cure ..................... 5.9 mm
low refractive index
Poly Acid Liquid
Fluoride Containing Glass
• Radiopacity ................... 3.4 Al : mm • High water resistance
• Fluoride Release & Recharge ... Yes
Properties of S-PRG Technology
without dissolution
High
Low
Tooth
GIOMER
Tooth
Resin
S-PRG Filler
Fluoride in GIOMER
Fluoride in Mouth
Glass Particle
Glass-ionomer
reaction on the
surface only
Phase of
glass-ionomer
BEAUTIFIL II
6 COLOR SET 6 x Beautifil ll
REFILLS:
Shades:
A1, A2, A3, A3.5,
A4, B1, B2, B3, C2,
C3, Inc, BW, A2O,
A3O
(same item)
$247.50/Set
SHOFU GLASSIONOMER FX-II CAPSULES
Chemistry Behind
Every Smile
Enhanced Direct Restorative
SHOFU GLASSIONOMER CX-Plus CAPSULES
For Predictable Permanent Cementation
GlasIonomer
CX-Plus Capsule
Glaslonomer FX-II Capsules
An enhanced general purpose direct restorative for
● Minimal intervention (MI) treatment
● Pediatric and geriatric restoration
● Intermediate restorative for heavy
stress bearing Class I & II restorations
● Restorations of Class III & V cavities
including abfraction defects
● Final restorative for non-stress bearing
Class I and II cavities in adult dentition
Features
After
● Durable mechanical properties
● A strong chemical bond to dentin and enamel
with continuous fluoride release and recharge
● Biocompatible and radiopaque with low solubility
● Fluorescence similar to natural tooth structure
● 3 year shelf life
Case 1
After
Case 2
Fast, Easy and Predictable
with every single mix
Working Time (23 °C) [from start of mixing]
1’ 40”
Setting Time (37 °C) [from start of mixing]
2’ 30”
Shades: A2 [PN 3270]
A3 [PN 3271]
A3.5 [PN 3272]
B2 [PN 3273]
Buy 5 get 1 FREE
Buy 10 get 3 FREE
Buy 20 get 8 FREE
Buy 40 get 20 FREE
Syringe, 4.5gm A2, A3, A3.5,
B2, A3O, Inc, Dura-White
Stone, Super-Snap Singles,
OneGloss Trial Set & Paper Pad
each 4.5gm
$49.50
Before
The Concentration of Fluoride in Mouth
Release
Nano particles
10~20nm
S-PRG
TECHNOLOGY
Before
Fluoride Release & Recharge Recharge
from Giomer
In Mouth
- Fluoride release and recharge
- Biocompatibility
• Long term clinical stability
• Shade conformity (optical property)
Aesthetics close to natural teeth
• Resistance to wear of posterior teeth
• Anti-plaque effect
Significant Fluoride Release & Recharge
S-PRG Filler (Surface Pre-Reacted Glass-ionomer)
contains a stable phase of glass-ionomer with the
ability to release and recharge fluoride responding to the
concentration of fluoride in the mouth while maintaining
the strength and stability of a composite resin.
GIOMER
• Maintaining the property of
multifunctional glass
• High level of radiopacity
• Properties of glass-ionomer
FX-II Capsules
50 pcs/box (0.55 gm/capsule)
$198.00/box
Buy 5 get 1 FREE
Chemistry Behind
Every Smile
A time tested luting cement for –
Cementation of crown & bridge work,
inlays and orthodontic appliances
Simple, Hassle-free and
Reliable Cementation…
Features
● Durable chemical bond to
both tooth structure and metal
● Low film thickness, optimal
thixotropicity and ideal flow
characteristics ensure a
complete marginal seal
● High resistance to moisture
contamination at the initial stage
● Radiopaque with high fluoride release
● 3 year shelf life
3277 CX-Plus Capsules
50 pcs/box (0.55 gm/capsule)
$198.00/box
Buy 5 get 1 FREE
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719
11
BeautiBond®
BeautiBond
™
Chemistry Behind
Every Smile
The Power Of One Unique Chemistry
BeautiBond is an innovative all-in-one 7th generation bonding system designed to
increase efficiency and ensure a reliable bond between composite resins or GIOMER
and natural tooth structure. The HEMA free formulation and incorporation of two unique
adhesive monomers helps to save time, eliminate sensitivity and achieve predictable
bonding with total peace of mind…
THE POWER OF ONE
SCIENCE BEHIND THE BOND
Two Powerful Adhesive Monomers
The dual adhesive monomers deliver almost equal
bond strength to both enamel and dentin.
The phosphonic acid monomer of BeautiBond
is more stable than phosphoric acid monomer which
enhances bonding to tooth enamel. The carboxylic
acid monomer facilitates a strong bond to dentin.
UNIQUE DUAL ADHESIVE MONOMERS
Ensures a strong reliable consistent bond to both
enamel and dentin
SINGLE APPLICATION
• Eliminates guess work
• Saves chair time
HEMA-FREE FORMULATION
• Eliminates post-operative sensitivity
• Provides stable & durable bond
• Minimized gingival blanching
PPEDICTABILITY EVEN WITHA THIN BONDING LAYER
• Thin bubble-free bonding layer of 5µm
• Facilitates easy adaptation of restorative
CONVENIENCE
Available in Unit Dose or Bottle
CONVENIENCE & PREDICTABILITY
SEM photographs courtesy of Dr. Toshimoto Yamada.
Thin Bonding Layer
The novel adhesive technology of
BeautiBond creates a very thin bubble
-free bonding layer of 5µm that helps to
facilitate easy application of the first layer
of the restorative material.
Enamel Bonding Interface
Dentin Bonding Interface
E – Enamel B – BeautiBond
D – Dentin
CR – Composite Resin
Simple Application
SEM photograph courtesy of Dr. Naotake Akimoto.
Etch, prime and bond in just 30 seconds with a single application and
be assured of a reliable, strong bond to both enamel and dentin.
Virtually No Post-Operative Sensitivity
The carboxylic acid monomer in BeautiBond helps
demineralise the smear layer without exposing the
dentinal tubules which virtually eliminates postoperative sensitivity.
Stable & Durable Bond
The HEMA-free
formulation
prevents aging
caused
by hydrolysis of
the hybrid layer
and adhesive
layer to guarantee
a stable bond with
outstanding
bonding durability.
Apply BeautiBond (5 sec).
Leave undisturbed for 10sec.
(%)
Guaranteed Results
Light-Cure (Halogen: 10sec
/ LED: 5 sec).
Photographs courtesy of Dr. Sushil Koirala.
Source – Internal data by SHOFU INC Japan.
Prepared cavity.
( Mpa )
Source – “Micro-tensile bond strength
of one, two-step self-etching adhesives
using novel thermal cycling method”.
Kawamoto Chiharu, Nagano Futami,
Yasumoto Kei, Sano Hidehiko;
Graduate School of Dental Medicine,
Hokkaido University, Sapporo, Japan.
“3rd International Congress on
Adhesive Dentistry 2008”.
12
Air-dry for 5sec to evaporate
water and volatile components.
(Gently air-dry for 3sec then air
-dry with high pressure for 2sec)
Application of BeautiBond.
Air-dried and light-cured.
Completed restoration with
BEAUTIFIL I I .
Order Information
BEAUTIBOND SET [PN 1781]
BeautiBond 6ml bottle,
Microtip Fine (with 1 handle)
x 50 application tips,
V-Dish x 25
each ... $115.00
Buy 5 get 1 FREE
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719
FL-Bond®
The 2nd Generation Giomer
Fluoride-Releasing Bonding System
Chemistry Behind
Every Smile
Ideal Viscosity & Reliable Adhesion
The unique S-PRG filler (Surface Pre-Reacted Glass-ionomer) in the bonding agent has
an ideal viscosity to ensure uniform application with optimal polymerization on the
marginal area and cavity walls to provide a secure marginal seal
FL-BOND II unlike other single bottle bonding systems can be applied in a wide range of
bond thickness 20~80µm while maintaining a stable bond strength
Other Bonding Agent
FL-BOND II Bonding Agent
Extremely thin
bonding layer
Collection of liquid
at cavity floor
Radiopacity for Accurate Diagnosis
FL-BOND II the 2nd generation Giomer 2-step,
self etching, fluoride releasing adhesive system
features a unique Primer and Bonding Agent
to provide an excellent bond to both enamel
and dentin with a secure marginal seal
This unique feature of FL-BOND II
bonding agent helps to clearly identify
translucent areas in the radiograph
seen between the radiopaque bond
With conventional
layer and the tooth
bonding agent
The FL-BOND II PRIMER contains a new
effective adhesion promoting monomer and
is acetone free with no incorporation of HEMA
to minimize odour and post operative sensitivity
Created for
1. Restoration of deep cavities (in conjunction with FL-BOND II
aesthetic restorative material)
2. FL-BOND II is recommended for bonding any composite to enamel
and dentin during restoration of Class I, II, III, IV and V cavities,
including cervical erosion
3. Restoration of hypersensitive and exposed root surface.
4. Intra oral repair of fractured indirect restorations when used with M.L.
Primer (Metal-Link Primer) and CeraResin Bond 1 (Porcelain Primer)
Excellent Handling and Short Application Time…
The self-etching primer prepares the enamel and
dentin surfaces by modifying the smear layer while
eliminating the need for separate etching with
Phosphoric acid
All it takes is, 2 simple steps and in just 35 seconds
the cavity is ready for immediate placement of
restorative materials
FL-BOND II
Complete Set
Cavity
restored with
Beautifil II
With FL-Bond II
Anti-Bacterial Effect for Added Protection
The FL-BOND II BONDING AGENT contains the S-PRG filler
(Surface Pre-Reacted Glass-ionomer), which helps to reinforce the
bonding interface between the restorative material and tooth structure
Step 1 – Enamel & Dentin priming
5 sec Dispense the Primer and apply thoroughly
on the enamel and dentin surface
10 sec Leave undisturbed for 10 seconds
5 sec Dry with oil-free air for 5 seconds
(Do not rinse with Water)
Step 2 – Resin Bonding
5 sec Dispense the Bonding Agent and apply
an even layer on the entire cavity
10 sec Light-cure for 10 seconds for Halogen
light and 5 seconds for LED light
Bond layer of
uniform thickness
FL-BOND II Bonding Agent
contains 40% of specially
developed fluoride releasing
filler particles using the
S-PRG Technology to add
an extra level of protection
against the inevitable
microbial invasion via
microleakage
It is reported that FL-BOND II forms an acid resistant
layer in and beneath the complex of resin-reinforced
dentin (hybrid layer) due to the continuous release of
cariostatic fluoride that stimulates the remineralization
of areas prone to secondary caries
Durable and Stable Bond Strength
The incorporation of an enhanced adhesive monomer
and new photo initiator gives FL-BOND II exceptionally
balanced bonding to both enamel and dentin.
The HEMA-free primer prevents the deterioration of the
bonding interface due to hydrolysis that ensures
long-term durability of the bond
1
2
3
4
Initial Bond Strength
(after 24hrs)
Enamel
Dentin
FL-BOND II
Primer (5ml)
Bonding Durability
(after 2,000 thermal cycles)
Dentin
Enamel
FL-BOND II
Bonding Agent (5ml)
each
$88.00
each
$49.50
$137.50/set
Buy 5 get 1 FREE
(same item)
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719
13
BeautiSealant®
Fluoride Releasing Pit & Fissure Sealant
Chemistry Behind
Every Smile
Case 1
Before
After
Deep carious fissures
Fissures protected with BeautiSealant
Case 2
Before
KEY ATTRIBUTES
Deep fissure
• Fluoride rich environment
• Anti-bacterial and anti-cariogenic property
• Acid-buffering capacity that neutralizes the effects of acidogenic bacteria
• Arrests demineralization and promotes remineralization of enamel
• Unique Anti-Plaque effect
After
Sealed with BeautiSealant
Photographs courtesy of Dr. Sushil Koirala
Preventive solutions have been successfully integrated into routine dental practice
to ensure life-long protection against dental caries. A dental sealant is a non-invasive
treatment technique that preserves tooth structure by providing a physical barrier
and preventing the ingress of oral bacteria as well as dietary carbohydrate.
BeautiSealant is a fluoride releasing pit and fissure sealant that seals deep grooves
and fissures while providing all round protection especially during the caries-prone
years through the sustained release and recharge of fluoride. Advances in modern
adhesive technology have paved the way to the development of BeautiSealant, a safer,
simpler and more predictable system that completely eliminates the need for
conventional phosphoric acid etch while assuring a durable bond to the tooth structure.
Photograph courtesy of Dr. Satoshi Fukumoto, Tohoku University, Japan
Features
• Remarkable handling characteristics and a bubble-free consistency
• Ideal viscosity and accurate delivery facilitates flow into difficult to
reach grooves and fossae
• High shear bond strength for long-term durability and retention
• Radiopacity equal to dentin
• Provides a fluoride rich environment
100 x 200µm
50 x 200µm
SEM photos of deep penetration into fissures
Gentle on Enamel
Conventional sealants require phosphoric acid etching which can dehydrate and demineralize healthy
tooth structure. BeautiSealant self-etch primer contains dual adhesive monomers that thoroughly
penetrate into deep pits and fissures to prime the tooth surface for an effective chemical bond to the
sealant while minimizing any damage to enamel.
Healthy Enamel
This HEMA-free formulation also prevents hydrolysis at the bonding interface for long-term stability and
retention. The self-etch primer conditions the enamel surface to make it more reactive that in turn
enhances the flow of the sealant paste into the pits and fissures.
Effective Delivery
BeautiSealant Primed Enamel
An efficient non-drip, fuss-free syringe design and an extra fine 27 gauge needle tip assures precise
delivery of the smooth, bubble-free sealant without the hassle of overfilling the
grooves, a common problem encountered with conventional delivery systems.
Order Information
Phosphoric Acid-Etched Enamel
“Giomer Concept”
BeautiSealant
Paste 1.2g,
BeautiSealant
Primer 3ml,
Needle Tips x 15,
A member of the Giomer family of restoratives, BeautiSealant is based on
Shofu’s proprietary S-PRG filler technology, where a stable glass ionomer
phase is formed to provide the benefits of fluoride. The glass core with glass
ionomer phase is protected with a trilaminar surface structure that allows
controlled release and recharge of fluoride while maintaining structural integrity.
1798
BeautiSealant System
$99.55
Remarkable Adhesion
BeautiSealant with its self-etch primer exhibits an equally durable bond to enamel
as other traditional sealants that employ an aggressive phosphoric acid etch.
The material surface is optimally cured to guarantee a reliable seal.
14
10µm
Buy 5 get 1 FREE
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719
BeautiCem SA®
Self-Adhesive Resin Cement
Chemistry Behind
Every Smile
Predictable Performance with...
BeautiCem SA self-etch, self-adhesive, dual-cure resin
cement that guarantees a simple, fast and reliable adhesion
for a variety of substrates ranging from tooth structure
(enamel and dentin) to metal, indirect resins and ceramics,
without fear of post-operative sensitivity. The dual-cure
mechanism anchors the restoration through a stable bond
and assures adequate polymerization even in areas with
limited light penetration while totally eliminating the need
for phosphoric acid etch.
BeautiCem SA is designed for the final
cementation of:
Optimally Translucent
A carefully controlled filler-resin ratio optimizes the
refractive index to achieve one of the highest levels
of translucency for challenging aesthetic cases.
Specially formulated polymer catalyst facilitates maximum
resin polymerization, for enhanced colour stability, high
resistance to discoloration especially at the margins and
low solubility in oral fluids.
• All ceramics inlays, onlays, crown and bridge restorations
(eg. Vintage ZR)
• Prosthesis fabricated with precious, semi-precious,
non-precious alloys including titanium
• Porcelain fused to metal crown and bridge restorations
(eg. Vintage, Vintage Halo & Vintage MP)
• CAD/CAM restorations
• Indirect resin inlays, onlays, crowns and bridges (eg. Ceramage)
• All-ceramic, resin and metal restorations to implant abutments
• Various kinds of metal and resin posts & cores
BeautiCem SA’s Novel Formula offers:
• Durable bond to a range of substrates
• Highest level of translucency for aesthetic cases
• Maximum resin polymerization imparts superior
flexural strength, higher resistance to staining and
low solubility
• Optimal viscosity makes it easy to use and
extremely thin bonding layer (11.8 µ) provides
invisible margins
• Assures patient comfort with virtually no post
-operative sensitivity
• Effective release of fluoride for sustained anti
-cariogenic and anti-bacterial properties
Remarkably Durable Bond
The special dual adhesive monomers in BeautiCem SA
provide an equally strong bond to naturally moist tooth
substrate (both enamel and dentin) as well as metal,
porcelain, all-ceramics and indirect resins.The novel
polymer catalyst optimizes resin polymerization in both
chemical as well as dual cure modes, and provides
superior mechanical properties for greater endurance to
occlusal forces and longevity of the restoration.
Secure Marginal Seal
BeautiCem SA, a non- sticky cement has ideal viscosity so
it does not run, enabling controlled delivery and accurate
placement of the restoration. Its inherent thixotropicity
ensures that it spreads to an even, bubble free layer that is
just 11.8 µ for virtually undetectable margins.
BeautiCem SA
Auto Mixing
Syringe 5ml
Mixing Tip x 10 pcs
Available in:
Clear [PN 3213] &
Ivory [PN 3214]
$115.50/syringe
Buy 5 get 1 FREE
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719
15
EyeSpecial C-II
SHOFU’S EyeSpecial C-II
THE ONLY ONE OF ITS KIND ... DESIGNED EXCLUSIVELY FOR SMART DENTISTRY
Dental photography takes a whole new meaning with SHOFU’S EyeSpecial C-II,
the smart digital camera designed exclusively for dentistry.
The Eyespecial C-II, with 12-megapixels sensor and pre-set dental shooting modes,
has applications ranging from routine intra-oral photography,
dental /orthodontic case presentaions to in-lab use by dental technicians.
An ultra-light and compact frame allows you to effortlessly capture precise dental images, with just one hand,
freeing the other to hold the cheek retractor or mirror. A large LED touchscreen with an intuitive display
simplifies usage and eliminates the need for extensive training on dental photography. Images can also be
directly uploaded to the computer, tablet or smart phone with a Wi-Fi SD card and easily archived with the
Surefile photo management software.
each $4,950.00
SPECIAL $3,850.00
• 8 Pre-set dental shooting modes
• 3.5 inch LED touchscreen with
intuitive one-touch operation
• Auto focus and zoom features with
built in anti-shake
• Exceptional depth of field and
proprietary flashmatic system
• Surefile photo management software
• Auto-cropping function for uniform
images
• Water & chemical resistant
AS EASY AS AIM AND SHOOT ...
EASY, SIMPLE & FOOL-PROOF
CONVENIENT
& DURABLE
Ultra-Light
SIMPLE
Compact
accurate
• Large 3.5 inch LED touchscreen for users to view, scroll
through images and select preferred options effortlessly
• Compatible with Wi-Fi SD card for instant direct image
transfer to computer, tablet or smartphone to facilitate
immediate case discussion and treatment planning
• Durable, scratch resistant frame that also exhibits water
and chemical resistance, for effective infection control
• Easy illustration of magnification indicator allows selection
of appropriate range / ratio while auto cropping function
crops image to preferred ratio even when shooting distance
is not optimal
• Patient ID management function to register patient specific
unique ID
• Additional draw option enables user to highlight area of
interest in the image
• PC and Mac compatible, free Surefile photo management
software efficiently archives patient images
16
• Ready to use, ultra-light, sleek and
ergonomically designed compact
camera can be held with just one
hand, unlike conventional digital
dental cameras that are bulky and
may require additional flash / lens
components
• 8 automated, dental pre-set modes
fulfil all dental photography needs
without requiring any customized
settings
• Intuitive display for ease of use,
even for those in the team without
in-depth knowledge or training
on dental photography
PRECISE & CONSISTENT
• Built in auto-focus, zoom (5x Optical zoom) and anti-shake features
help to capture precise images every time while minimizing error
• Dental cropping gridlines on the display allows users to take clear,
balanced dental photos every time
• Proprietary flashmatic system with automatic flash settings for precise
lighting control to capture images in true colour, thus assuring accurate
representation of the dental shade
• Exceptional depth of field that is consistent with area of focus required
in dental photography to ensure sharpness and uniformity of the image
• Infra-red, UV and anti-reflection filters in the camera also help to boost
image quality
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719
`