PENDANT MOUNT INSIDE & OUTSIDE LIT CORNER PATTERNS Project: Type:

PENDANT MOUNT
INSIDE & OUTSIDE LIT CORNER PATTERNS
1.800.263.AXIS
[ T ] 514.948.6272
[ F ] 514.948.6271
www.axislighting.com
PROJECT INFORMATION
Project:
Type:
IMPORTANT – all corner patterns must be submitted with drawings indicating dimensions and angles degree.
90
900
900
0
900
900
8'
8'
8'
8'
8'
900
8'
8'
900
900
8'
BMDPAT
SQO
90+90+90+90
S
32'
BMDPAT
SQI
90+90+90+90
S
32'
1
2
3
4
5
1
2
3
4
5
3D VIEW - Square Outside Lit Corner Pattern
3D VIEW - Square Intside Lit Corner Pattern
NOTE: Pattern length is determined by lamp length
ORDERING CODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PRODUCT SPECIFICATIONS
1 PRODUCT ID
BDPAT
BMDPAT
BBDPAT
B6DPAT
2 PATTERNS
SQI
SQO
RECI
RECO
beam2 pendant direct
beam3 pendant direct
beam4 pendant direct
beam6 pendant direct
3 CORNER DEGREES
square inside lit corners
square outside lit corners
rectangle inside lit corners
rectangle outside lit corners
90 90 degrees
# other degree
4 OPTICS DIRECT
5 LENGTH/FT
S satin lens
F frosted lens(1)
# total pattern length
6 SPECIFY LENGTH
NL
NL4
EX
EX4
nominal (3’ & 4’ lamps)
nominal (4’ lamps only)
exact (3’ & 4’ lamps)
exact (4’ lamps only)
(1) not recommended with
staggered lamping
7 LAMP
T5 T5
T5HO T5HO
T8 T8
8 LAMP CONFIG.
0
1
2
+S
9 FINISH
AP aluminum paint
W white
C custom
0 lamp
1 lamp
2 lamps(2)
staggered(3)
(2) not available for beam2 and beam3
(3) only T5/T5HO 1 lamp staggered for beam2
and beam3
13 MOUNTING/SUSPENSION
CA#
CT9-#
CT15-#
CTS#
SA#
drywall+cable length (36”std)
TB/TG 9/16+cable length (36” std.)
TB/TG 15/16+cable length (36”std)
ST+cable length (36”std)
drywall+stem length>48 (18”std)
(5) Please consult factory
14 BATTERY
B# battery pack 4’ sections
10 VOLTAGE
120
277
347
UNV
120V
277V
347V(5)
universal
11 BALLAST
D
E
ERS
T
BI
dimming
instant start
rapid start
step dimming(6)
bi-level dimming
12 CIRCUITS
1
2
2A/B
+E#
+NL#
+GTD#
1 regular
2 regular
2 alternating
emergency section
night light section
generator transfer device
(6) In T5HO, only available for
2x4’ lamp configuration
15 OTHER
F fuse
16 CUSTOM
C custom
Please specify
Ballast, Battery Pack and Integrated Control Details and Custom Description:
FILE NAME:Beam Pendant OU-IN-LC
October 30, 2014
Product design and development is an ongoing process at Axis Lighting. We reserve the right to change specifications. Contact Axis for the latest product information.
© 2011 Axis Lighting Inc. Page: 1 / 3
PENDANT MOUNT
INSIDE & OUTSIDE LIT CORNER PATTERNS
1.800.263.AXIS
[ T ] 514.948.6272
[ F ] 514.948.6271
www.axislighting.com
LIT CORNER FEATURES
The Lit Corner system allows continuous illumination all the way
through the corner section
To optimize corner illumination, lit corners are created as integral
components of the linear sections. Linear sections have mitered
ends that connect to corresponding mitered ends of neighboring
linear sections.
Inside Illuminated Corner. A fully lit corner on the inside planes.
Outside Illuminated Corner - A fully lit corner on the outside planes.
Illuminated Corners are more complex. Because the corner is
fully illuminated, the corner is not independent of the straight
sections, but integrated into the straight segment’s housing. The
corner is mitered, allowing a seamless line of light.
TIP: Provide sketches illustrating corner
types and locations required.
Outside lit Corner
FILE NAME:Beam Pendant OU-IN-LC
Inside lit Corner
October 30, 2014
Product design and development is an ongoing process at Axis Lighting. We reserve the right to change specifications. Contact Axis for the latest product information.
© 2011 Axis Lighting Inc. Page: 2 / 3
IMPORTANT – all corner patterns must be submitted with drawings indicating dimensions and angles degree.
1.800.263.AXIS - www.axislighting.com - [email protected]
`