D+H MECHATRONIC AG Bracket range 2012 | Schüco ®

D+H MECHATRONIC AG
Bracket range 2012 | Schüco®
®
Schüco
CDC
bracket
sets for
Installation solutions for drives
Application
Inward opening bottom-hung window
Inward opening side-hung window
Bottom-hung window,
Side-hung window,
inwards opening
aluminium,
integrated mounting
· CDC drive
Projected top-hung vent,
Parallel outward opening window,
outwards opening
aluminium,
Attention: Please beware of CDC instruction for use: check pressure
load diagramm and mininum sash height / width!
Product information
Type
Art. no. set
Installation type
CDC, 350 housing
integrated mounting,
CDC, 600 housing
surfaced mounting
· CDC drive
· KA drive
Frame material used
AD drawing number
Components
Sash bracket / art. no.
Roof windows,
outwards opening
aluminium profile system
· KA drive
· CDP drive
Cover plate /art. no.
· ZA drive
· SXD
drive
Scope of supply
Complete, including fixing
materials
·
DXD
drive
*See the application overview for CDC bracket sets on the reverse for detailed information about the profile series
Frame bracket / art. no.
Top-hung windows,
outwards opening
aluminium profile system
· KA drive
Turning sash windows,
inwards opening
· KA drive
© 2012 D+H Mechatronic AG, Ammersbek
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · i[email protected] · www.dh-partner.com
Page 1
Series CDC
aluminium profile system
®
CDC
Schüco
bracket
sets for
Contents
Overview profile series incl. outer frame and sash frame
Outer frame
profiles
Profile
series
/ type of assembly
Bracket set
Art. Sash
no. profiles Page
CDC bracket sets
4
Mounting solutions for bottom-hung windows, side-hung windows, aluminium
CDC-BS034-IFI
Series AWS 65; 70.HI; 75.SI
CDC-BS035-IFI
CDC-BS034-IFI
Series AWS 70BS.HI; 70WF.HI; 75BS.HI
CDC-BS035-IFI
CDC-BS041-IFI
Series Royal C; S xx
CDC-BS042-IFI
CDC-BS034-IFI
Series Royal S xx.HI
CDC-BS035-IFI
25.ADN.KS
25.ADP.KS
25.ADN.KS
25.ADP.KS
25.AEF.KS
25.AEE.KS
25.ADN.KS
25.ADP.KS
4
5
5
7
7
9
9
11
11
Mounting solutions for projected top-hung windows, parallel outward opening windows, aluminium 13
CDC-BS009-VFO
25.ABE.KS
15
Series AWS 102
Colour option
16
KA bracket sets
17
Mounting solutions for roof windows
Series AWS 57 RO
KA-BS062-VFO
KA-SW-BS063-VFO
KA-TW-BS064-VFO
KA-BS053-VFO
KA-TW-BS054-VFO
KA-BS009-VFO
KA-TW-BS027-VFO
KA-SW-BS007-VFO
KA-BS010-VFO
KA-TW-BS028-VFO
KA-SW-BS008-VFO
26.ADY.KS
26.ADZ.KS
26.AEA.KS
26.ADR.KS
26.ADS.KS
26.ABF.KS
26.ACF.KS
26.ABB.KS
26.ABG.KS
26.ACG.KS
26.ABE.KS
KA-BS036-VFO
KA-TW-BS039-VFO
26.ACS.KS
26.ACV.KS
17
18
18
18
19
19
20
20
20
21
21
21
22
23
23
Mounting solutions for projected top-hung windows, parallel outwards opening windows
Series AWS102 SK (sash profile 339 470)
KA-BS001-VFO
26.AAF.KS
KA-TW-BS045-VFO
26.ADB.KS
Series AWS102 SK (sash profile 339 490)
KA-BS051-VFO
26.ADJ.KS
KA-TW-BS068-VFO
26.AEG.KS
24
25
25
26
26
Mounting solutions for turning-sash windows
Series AWS
27
28
28
29
Series Royal S 47D
Series Royal S 88D
Series Royal S 106D
Mounting solutions for top-hung windows
Series AWS 65, 70, 75
KA-BS085-VFIS
KA-TW-BS086-VFIS
Colour option
Page 2
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
26.AFL.KS
26.AFM.KS
© 2012 D+H Mechatronic AG, Ammersbek
®
Schüco
CDC
bracket
sets for
Contents
Application
Profile
series / type of assembly
Bracket set
Inward
openingsets
bottom-hung window
CDP bracket
Inward opening side-hung window
31
CDP-BS003-OM
CDP-BS001-OM
31
32
33
34
Mounting solutions for roof windows
Series AWS 57 RO (Blendrahmen 331 810, 331 820)
Series AWS 57 RO (Blendrahmen 369 770, 369 780)
Colour option
Art. no.
26.CAL.KS
26.CAJ.KS
Page
ZA bracket sets
35
Mounting solutions for roof windows
Series AWS 57 RO (Blendrahmen 331 810, 331 820)
35
36
36
37
37
38
38
39
39
40
ZA-BS030-OM
27.BCR.KS
ZA-BS031-SM
27.BCP.KS
ZA-BS028-OM
27.BCM.KS
Series AWS 57 RO (Blendrahmen 369 770, 369 780)
Attention: Please beware of CDC instruction for use: check pressure
load diagramm and mininum
sash height / width!
ZA-BS029-SM
27.BCN.KS
Series
Royal
S 88D
Product
information
CDC, 350 housing ZA-BS009-SM
CDC, 60027.BAT.KS
housing
ZA-BS010-OM
27.BBC.KS
Type
ZA-BS011-SM
27.BBD.KS
Series Royal S 106D
Art. no. set
ZA-BS012-OM
27.BBE.KS
Installation type
Colour option
Frame material used
AD drawing number
Components
Mounting solutions for roof windows
Sash bracket / art. no.
Series AWS 57 RO (Blendrahmen 331 820)
27.CAK.KS
SXD-BS001-SM
Frame bracket / art. no.
27.CAL.KS
SXD-BS002-OM
Cover plate /art. no.
27.CAM.KS
SXD-BS003-SM
Series
AWS 57 RO (Blendrahmen 369 780)
27.CAN.KS
SXD-BS004-OM
Scope ofRoyal
supplyS 88D
Complete, including fixing
materials -SM
27.CAP.KS
SXD-BS005
Series
*See the application overview for CDC bracket sets on the reverse for
detailed
information
series
-OM about the profile
27.CAR.KS
SXD-BS006
27.CAS.KS
SXD-BS007-SM
Series Royal S 106D
27.CAT.KS
SXD-BS008-OM
Colour option
41
42
42
43
43
44
44
45
45
46
DXD bracket sets
47
Mounting solutions for roof windows
Series AWS 57 RO Flügelrahmen 331 810, 331 820
Series AWS 57 RO Flügelrahmen 369 770, 369 780
Series Royal S 88D
Series Royal S 106D
DXD-BS028-OM
DXD-BS029-SM
DXD-BS028-OM
DXD-BS029-SM
DXD-BS007-OM
DXD-BS008-SM
DXD-BS005-OM
DXD-BS006-SM
27.ACW.KS
27.ACX.KS
27.ACW.KS
27.ACX.KS
27.ABD.KS
27.ABF.KS
27.AAP.KS
27.AAR.KS
Colour option
© 2012 D+H Mechatronic AG, Ammersbek
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
47
48
48
49
49
50
50
51
51
52
Page 3
Series CDC
41
SXD bracket sets
CDC bracket sets for
Mounting solutions for bottom-hung windows,
Overview
profile
series incl. outer frame and sash frame
side-hung
windows
Outer frame profiles
Arguments
for D+H installation solutions
Sash profiles
Efficiency
• Time-saving installation through optimum adaptation of the
bracket set to the particular profile system
Design
• No visible fixing material
EN 12101-2 tested
• Solutions tested as complete systems for smoke and heat
vent applications according to DIN EN 12101-2
Quick fitting
• Brackets are ready for immediate fitting – no additional
adaptation work on the brackets is necessary
Retains the centre seal
• The motor cover included guarantees an optimum fixing of the
centre seal
Simple chain disconnection
• Disconnection of chain also possible when the window is
closed
Complete scope of supply
• All materials necessary for fixing are included in the scope of
supply of the bracket set
Special colours
• The sash bracket can be supplied in a special colour as an
option, according to RAL Classic (colour chart RAL-K5)
(wet-painted or powder-coated)
Simple application overview
• Easy selection of the correct fittings with the D+H application
table
Documentation
• Application drawings suitable for window and facade
manufacturers available
Page 4
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
CDC bracket sets for
Schüco® Series AWS 65; 70.HI; 75.SI*
Application
Inward opening bottom-hung window
Inward opening side-hung window
· Minimum outer frame face width
on the inside 40mm
· Minimum outer frame face width on
the inside 40mm
· Minimum outer frame width
700mm (CDC; 350 housing) or
950mm (CDC; 600 housing), for
outer frame with 50mm face
height on the inside
DIN-left:
· standard chain up to 350mm stroke
· SBD chain up to 150mm stroke
Attention: Please beware of CDC instruction for use: check pressure load diagramm and mininum sash height / width!
Product information
CDC, 350 housing
CDC, 600 housing
Type
CDC-BS034-IFI
CDC-BS035-IFI
Art. no. set
25.ADN.KS
25.ADP.KS
Installation type
profile integrated
profile integrated
Frame material used
aluminium windows
aluminium windows
AD drawing number
AD00153
AD000153
Components
CDC-BS034-IFI
CDC-BS035-IFI
Sash bracket / art. no.
CDC-SB015 / 25.ADM.KS
CDC-SB015 / 25.ADM.KS
Frame bracket / art. no.
CDC-FB003 / 25.AAN.KS
CDC-FB003 / 25.AAN.KS
Cover plate /art. no.
CDC-CP001 / 25.AAH.KS
CDC-CP006 / 25.ABH.KS
Scope of supply
Complete, including fixing materials
*See the application overview for CDC bracket sets on the reverse for detailed information about the profile series
© 2012 D+H Mechatronic AG, Ammersbek
CDC-BS035-IFI
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 5
Series CDC
CDC-BS034-IFI
CDC bracket sets for
Overview profile series incl. outer frame and sash frame
Outer frame profiles
Sash profiles
Schüco® Series AWS 65
363 940
363 950
363 960
363 970
364 020
364 030
364 040
364 050
364 060
364 260
364 440
364 460
364 470
364 480
364 870
364 880
364 890
364 620
364 630
364 650
364 660
364 680
364 690
364 700
364 710
364 720
374 840
374 850
358 810
358 820
358 830
358 510
367 190
367 200
367 210
358 590
358 610
358 620
358 650
358 640
358 660
382 940
382 950
358 960
358 960
358 960
358 980
382 470
382 480
382 490
373 990
374 890
374 910
374 920
Schüco® Series AWS 70 HI
358 170
358 190
358 270
358 200
358 280
358 210
358 220
358 290
358 300
358 230
358 310
358 430
358 320
358 440
Schüco® Series AWS 75 SI
367 280
367 290
367 300
374 980
382 100
382 170
382 180
382 190
382 200
382 210
Page 6
382 300
382 310
382 320
382 330
382 340
382 380
382 390
382 400
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
CDC bracket sets for
Schüco® Series AWS 70 BS.HI; 70 WF.HI;
Application
Inward opening bottom-hung window
Inward opening side-hung window
· Minimum outer frame face width
on the inside 40mm
· Minimum outer frame face width on
the inside 40mm
· Minimum outer frame width
700mm (CDC; 350 housing) or
950mm (CDC; 600 housing), for
outer frame with 50mm face
height on the inside
DIN-left:
· standard chain up to 350mm stroke
· SBD chain up to 150mm stroke
Attention: Please beware of CDC instruction for use: check pressure load diagramm and mininum sash height / width!
Product information
CDC, 350 housing
CDC, 600 housing
Type
CDC-BS034-IFI
CDC-BS035-IFI
Art. no. set
25.ADN.KS
25.ADP.KS
Installation type
profile integrated
profile integrated
Frame material used
aluminium windows
aluminium windows
AD drawing number
AD00118
AD000118
Components
CDC-BS034-IFI
CDC-BS035-IFI
Sash bracket / art. no.
CDC-SB015 / 25.ADM.KS
CDC-SB015 / 25.ADM.KS
Frame bracket / art. no.
CDC-FB003 / 25.AAN.KS
CDC-FB003 / 25.AAN.KS
Cover plate /art. no.
CDC-CP001 / 25.AAH.KS
CDC-CP006 / 25.ABH.KS
Scope of supply
Complete, including fixing materials
*See the application overview for CDC bracket sets on the reverse for detailed information about the profile series
© 2012 D+H Mechatronic AG, Ammersbek
CDC-BS035-IFI
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 7
Series CDC
CDC-BS034-IFI
CDC bracket sets for
Overview profile series incl. outer frame and sash frame
Outer frame profiles
Sash profiles
Schüco® Series AWS 70 BS.HI
366 220
366 230
366 410
366 430
366 570
366 570
366 790
366 800
366 470
366 490
367 340
Schüco® Series AWS 70 WF.HI
366 730
366 740
366 410
366 430
Schüco® Series AWS 75 BS.HI
366 340
Page 8
366 350
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
CDC bracket sets for
Schüco® Series Royal C; S 65; 65H; 70; 70H;
70BS; 70FF*
Application
Inward opening bottom-hung window
Inward opening side-hung window
· Minimum outer frame face width
on the inside 40mm
· Minimum outer frame face width on
the inside 40mm
· Minimum outer frame width
700mm (CDC; 350 housing) or
950mm (CDC; 600 housing), for
outer frame with 50mm face
height on the inside
DIN-left:
· standard chain up to 350mm stroke
· SBD chain up to 150mm stroke
Attention: Please beware of CDC instruction for use: check pressure load diagramm and mininum sash height / width!
Product information
CDC, 350 housing
CDC, 600 housing
Type
CDC-BS041-IFI
CDC-BS042-IFI
Art. no. set
25.AEE.KS
25.AEF.KS
Installation type
profile integrated
profile integrated
Frame material used
aluminium windows
aluminium windows
AD drawing number
AD00186
AD00186
Components
CDC-BS041-IFI
CDC-BS042-IFI
Sash bracket / art. no.
CDC-SB015 / 25.ADM.KS
CDC-SB015 / 25.ADM.KS
Frame bracket / art. no.
CDC-FB003 / 25.AAN.KS
CDC-FB003 / 25.AAN.KS
Cover plate /art. no.
CDC-CP002 / 25.AAJ.KS
CDC-CP010 / 25.ABM.KS
Scope of supply
Complete, including fixing materials
*See the application overview for CDC bracket sets on the reverse for detailed information about the profile series
© 2012 D+H Mechatronic AG, Ammersbek
CDC-BS042-IFI
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 9
Series CDC
CDC-BS041-IFI
CDC bracket sets for
Overview profile series incl. outer frame and sash frame
Outer frame profiles
Sash profiles
Schüco® Series Royal C
340 070
340 080
340 090
340 100
340 140
340 150
340 160
340 170
340 320
340 820
340 830
340 900
340 950
340 270
340 180
340 190
340 200
340 210
340 640
166 460
166 570
166 810
166 900
166 940
197 110
166 470
166 480
166 490
166 640
319 050(RS 65H)
310 630
310 950
310 930
310 840
310 850
311 040
360 420
360 460
360 470
360 480
360 420
360 460
360 470
360 480
Schüco® Series Royal S 65, Royal S 65H
166 040
166 080
166 220/166 230
166 240
166 250
166 260
166 270
166 280
166 320
166 330/166 670
166 340/166 680
166 440
166 450
Schüco® Series Royal S 70, Royal S 70H
310 500
310 510
310 520
310 530
310 540
310 580
310 590
310 600
310 610
310 620
Schüco® Series Royal S 70BS
312 790
312 800
310 260
310 270
Schüco® Series Royal S 70FF
179 710
179 730
Page 10
310 260
310 270
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
CDC bracket sets for
Schüco® Series Royal S 65.HI; 65H.HI; 70.HI;
70H.HI; 70BS.HI; 75.HI; 75BS.HI; 75FF.HI*
Application
Inward opening bottom-hung window
Inward opening side-hung window
· Minimum outer frame face width
on the inside 40mm
· Minimum outer frame face width on
the inside 40mm
· Minimum outer frame width
700mm (CDC; 350 housing) or
950mm (CDC; 600 housing), for
outer frame with 50mm face
height on the inside
DIN-left:
· standard chain up to 350mm stroke
· SBD chain up to 150mm stroke
Attention: Please beware of CDC instruction for use: check pressure load diagramm and mininum sash height / width!
Product information
CDC, 350 housing
CDC, 600 housing
Type
CDC-BS034-IFI
CDC-BS035-IFI
Art. no. set
25.ADN.KS
25.ADP.KS
Installation type
profile integrated
profile integrated
Frame material used
aluminium windows
aluminium windows
AD drawing number
AD00185
AD00185
Components
CDC-BS034-IFI
CDC-BS035-IFI
Sash bracket / art. no.
CDC-SB015 / 25.ADM.KS
CDC-SB015 / 25.ADM.KS
Frame bracket / art. no.
CDC-FB003 / 25.AAN.KS
CDC-FB003 / 25.AAN.KS
Cover plate /art. no.
CDC-CP001 / 25.AAH.KS
CDC-CP006 / 25.ABH.KS
Scope of supply
Complete, including fixing materials
*See the application overview for CDC bracket sets on the reverse for detailed information about the profile series
© 2012 D+H Mechatronic AG, Ammersbek
CDC-BS035-IFI
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 11
Series CDC
CDC-BS034-IFI
CDC bracket sets for
Overview profile series incl. outer frame and sash frame
Outer frame profiles
Sash profiles
Schüco® Series Royal S 65.HI, Royal S 65H.HI
370 080
370 090
370 100
370 110
370 220
370 230
370 240
370 250
370 260
370 270
370 280
370 360
370 370
370 430
370 440/370 450
370 460/370 470
370 480
370 600
370 630
370 660
370 670
370 680
370 880
370 840(RS 65H.HI)
320 400
320 790
320 890
320 900/320 910
320 920
320 440
320 450
320 460
320 570
360 550
360 560
380 340
380 350
380 370
380 390
380 280
380 520
380 530
380 540
319 650
319 630
380 860
319 630
Schüco® Series Royal S 70.HI; Royal S 70H.HI
320 100
320 110
320 120
320 130
320 140
320 180
320 190
320 200
320 210
320 220
320 230
320 320/320 340
Schüco® Series Royal S 70BS.HI
360 240
360 250
Schüco® Series Royal S 75.HI
380 080
380 090
380 110
380 120
380 130
380 180
380 190
380 200
380 210
380 220
380 230
Schüco® Series Royal S 75BS.HI
312 840
312 850
Schüco® Series Royal S 75FF.HI
380 640
Page 12
380 660
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
CDC bracket sets for
Mounting solutions for projected top-hung
windows, parallel outward opening windows
Application for D+H intstallation solutions
Arguments
Inward opening bottom-hung window
Inward opening side-hung window
Efficiency
•Time-saving installation through optimum adaptation of the
bracket set to the particular profile system
EN 12101-2 tested
• Solution tested as complete system for smoke and heat vent
application according to DIN EN 12101-2
Quick fitting
• Brackets are ready for immediate fitting – no additional
adaptation work on the brackets is necessary
Complete scope of supply
Please
beware
CDCare
instruction
use:
check
•Attention:
All materials
necessary
foroffixing
included for
in the
scope
of pressure load diagramm and mininum sash height / width!
supply of the bracket set
Product information
CDC, 350 housing
CDC, 600 housing
Type
Simple chain detachment
Art. no. set
• In case of service, the chain can also be detached when the
Installation
type
window is closed
Frame material used
AD drawing number
Documentation
• Application drawings suitable for window and facade
Components
manufacturers available
Sash bracket / art. no.
Frame bracket / art. no.
Cover plate /art. no.
Scope of supply
Complete, including fixing materials
© 2012 D+H Mechatronic AG, Ammersbek
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 13
Series CDC
*See the application overview for CDC bracket sets on the reverse for detailed information about the profile series
CDC bracket sets for
Overview profile series incl. outer frame and sash frame
Outer frame profiles
Page 14
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Sash profiles
© 2012 D+H Mechatronic AG, Ammersbek
CDC bracket sets for
Schüco® Series AWS 102
(Sash frame 339 490; 339 470)
Application
Inward opening
Projected
top-hung
bottom-hung
vent
window
Inward opening
Parallel
outwardside-hung
opening window
window
· D+H installation solution also
functions in combination with the
narrower sash profile 339 490
· D+H installation solution also
functions in combination with the
narrower sash profile 339 490
Attention: Please beware of CDC instruction for use: check pressure load diagramm and mininum sash height / width!
Product information
CDC, all
350Versions
housing
Type
CDC-BS009-VFO
Art. no. set
25.ABE.KS
Installation type
profile integrated
Frame material used
aluminium windows
AD drawing number
AD0046
Components
CDC-BS009-VFO
Sash bracket / art. no.
CDC-SB008 / 25.ABD.KS
Frame bracket / art. no.
CDC-FB006 / 25.ABC.KS
Cover plate /art. no.
–
Scope of supply
CDC, 600 housing
Complete, including fixing materials
*See the application overview for CDC bracket sets on the reverse for detailed information about the profile series
© 2012 D+H Mechatronic AG, Ammersbek
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 15
Series CDC
CDC-BS009-VFO
CDC bracket sets for
Colour option
CDC-BS/C
(25.ACV.KS)
Overview profile
series incl. outer frame and sash frame
Outer frame
Order
and profiles
delivery
Sash profiles
RAL colour system
order
· The RAL colour systems are standards of the RAL institute for
colours. Today the „RAL CLASSIC“ system is well-known: This
system exists since 1927 and is characterized by 210 differents
colours and a four-digit numbering system.
Please provide the following information for an order:
· Sash bracket and frame bracket will be varnished or powder coated
according to RAL colour chart K5.
· The colours RAL 9006/9007/9016 and the DB colour 703 are
offered with shorter delivery times.
· Colour option: Typ: CDC-BS/C, Art.-Nr.: 25.ACV.KS
· Type of bracket which should be varnished/powder coated e.g.:
CDC-BS034-IFI (see planning aid for searching and finding the
appropriate bracket set)
· colour (four-digit RAL label) if possible including colour name
· Technique (varnish or powder coating)
· Quantity
· Packaging (single pack or multipack)
Product information
Colour option CDC bracket
Type
CDC-BS/C
Art. no. Set
25.ACV.KS
Colour system
RAL Classic K5 (more colours on request)
Technique
varnish, powder coating
Scope of supply
same as standard
Order example
example
Type / Art. no. colour option
CDC-BS/C / 25.ACV.KS
Type
CDC-BS034-IFI
Colour system
RAL 9016
Technique
varnish
Quantity
100
Packaging
Example bracket set CDC-BS034-IFI
Remains black
Varnished/powder coated components are
shown in red for clarification. Screws and
splints will not be varnished/powder
RAL 9006*
coated.
RAL 9007*
RAL 9016*
Component will be varnished/powder coated in RAL xxxx
DB 703*
Page 16
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
KA bracket sets for
Installation solutions for roof windows
Arguments
Application for D+H installation solutions
Efficiency
• Time-saving installation through optimal adaptation of the
bracket set for the particular profile
• no additional adaptation work on the bracket necessary
EN 12101-2 tested
• The bracket sets were tested in combination with an automatic
SHEV according to DIN EN 12101-2 (classification reports are
still being produced in part).
Functional safety
• Optimum adaptation of the bracket to the particular drive
system guarantees complete functional safety
Complete
of supply
Productscope
information
• All materials necessary for fixing are included in the scope of
Type
supply of the bracket set
Art. no. set
Installation
type
Special
colours
Frame
material
• All brackets can be supplied in a special colour as an option,
AD
drawingtonumber
according
RAL Classic (colour chart RAL-K5)
(wet-painted or powder-coated)
Components
Documentation
Sash bracket / art. no.
•Frame
Application
drawings
bracket
/ art. no.suitable for window and facade
manufacturers available
Complete, including fixing materials
© 2012 D+H Mechatronic AG, Ammersbek
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 17
Series KA
Scope of supply
KA bracket sets for
Schüco® Series Royal S 47D
Application
Outward opening roof window
KA-TW-BS054-VFO
KA-BS053-VFO
Product information
KA
KA-TW
Type
KA-BS053-VFO
KA-TW-BS054-VFO
Art. no. set
26.ADR.KS
26.ADS.KS
Installation type
surfaced mounted
surfaced mounted
Frame material
aluminium window
aluminium window
AD drawing number
Ad00141
AD00142
Components
KA-BS053-VFO
KA-TW-BS054-VFO
Sash bracket / art. no.
–
–
Frame bracket / art. no.
–
–
Scope of supply
without fixing
material
Complete,
including
fixing materials
KA-BS053-VFO
Page 18
KA-TW-BS054-VFO
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
KA bracket sets for
Schüco® Series AWS 57 RO
((outer frame 331 810, 331 820, 369 770, 369 780)
Application
Outward opening roof window
ŸBracket set specially designed for
KA-SW, motor mounting bracket
designed for especially large
forces.
KA-BS062-VFO
KA-SW-BS063-VFO
Product information
KA
KA-TW
KA-SW
Type
KA-BS062-VFO
KA-TW-BS064-VFO
KA-SW-BS063-VFO
Art. no. set
26.ADY.KS
26.AEA.KS
26.ADZ.KS
Installation type
surfaced mounted
surfaced mounted
surfaced mounted
Frame material
aluminium window
aluminium window
aluminium window
AD drawing number
AD00122
AD00123
AD00121
Components
KA-BS062-VFO
KA-TW-BS064-VFO
KA-SW-BS063-VFO
Sash bracket / art. no.
KA-SB010 / 26.ADW.KS
KA-SB010 /2x 26.ADW.KS
KA-SB010 /2x 26.ADW.KS
Frame bracket / art. no.
KA-FB013 / 26.ADX.KS
KA-FB013 / 26.ADX.KS
KA-FB013 / 26.ADX.KS
Scope of supply
Complete, including fixing materials
KA-BS062-VFO
© 2012 D+H Mechatronic AG, Ammersbek
KA-TW-BS064-VFO
KA-SW-BS063-VFO
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 19
Series KA
KA-TW-BS064-VFO
KA bracket sets for
Schüco® Serie Royal S 88D
Application
Outward opening roof window
ŸBracket set specially designed for
KA-SW, motor mounting bracket
designed for especially large
forces.
KA-BS009-VFO
KA-SW-BS007-VFO
KA-TW-BS027-VFO
Product information
KA
KA-TW
KA-SW
Type
KA-BS009-VFO
KA-TW-BS027-VFO
KA-SW-BS007-VFO
Art. no. set
26.ABF.KS
26.ACF.KS
26.ABB.KS
Installation type
surfaced mounted
surfaced mounted
surfaced mounted
Frame material
aluminium window
aluminium window
aluminium window
AD drawing number
AD00079
AD00108
AD00078
Components
KA-BS009-VFO
KA-TW-BS027-VFO
KA-SW-BS007-VFO
Sash bracket / art. no.
KA-SB004 / 26.AAZ.KS
KA-SB004 / 2x 26.AAZ.KS
KA-SB004 / 2x 26.AAZ.KS
Frame bracket / art. no.
KA-FB008 / 26.ABA.KS
KA-FB008 / 26.ABA.KS
KA-FB008 / 26.ABA.KS
Scope of supply
Complete, including fixing materials
KA-BS009-VFO
Page 20
KA-TW-BS027-VFO
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
KA-SW-BS007-VFO
© 2012 D+H Mechatronic AG, Ammersbek
KA bracket sets for
Schüco® Serie Royal S 106D
Application
Outward opening roof window
ŸKonsolensatz speziell für KA-SW,
Motormontagewinkel sind für eine
besonders hohe Krafteinleitung
ausgelegt
KA-BS010-VFO
KA-SW-BS008-VFO
Product information
KA
KA-TW
KA-SW
Type
KA-BS010-VFO
KA-TW-BS028-VFO
KA-SW-BS008-VFO
Art. no. set
26.ABG.KS
26.ACG.KS
26.ABE.KS
Installation type
surfaced mounted
surfaced mounted
surfaced mounted
Frame material
aluminium window
aluminium window
aluminium window
AD drawing number
AD00081
AD00109
AD00080
Components
KA-BS010-VFO
KA-TW-BS028-VFO
KA-SW-BS008-VFO
Sash bracket / art. no.
KA-SB005 / 26.ABC.KS
KA-SB005 / 2x 26.ABC.KS
KA-SB005 / 2x 26.ABC.KS
Frame bracket / art. no.
KA-FB008 / 26.ABA.KS
KA-FB008 / 26.ABA.KS
KA-FB009 / 26.ABD.KS
Scope of supply
Complete, including fixing materials
KA-BS010-VFO
© 2012 D+H Mechatronic AG, Ammersbek
KA-TW-BS028-VFO
KA-SW-BS008-VFO
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 21
Series KA
KA-TW-BS028-VFO
KA bracket sets for
Installation solutions for top-hung windows
Arguments
Application for D+H installation solutions
Efficiency
• Time-saving installation through optimal adaptation of the
bracket set for the particular profile
• no additional adaptation work on the bracket necessary
EN 12101-2 tested
• The bracket sets were tested in combination with an automatic
SHEV according to DIN EN 12101-2 (classification reports are
still being produced in part).
Functional safety
• Optimum adaptation of the bracket to the particular drive
system guarantees complete functional safety
Complete scope
of supply
Product
information
• All materials necessary for fixing are included in the scope of
Type
supply of the bracket set
Art. no. set
Installation
type
Special colours
Frame
material
• All brackets can be supplied in a special colour as an option,
AD
drawing to
number
according
RAL Classic (colour chart RAL-K5)
(wet-painted or powder-coated)
Components
Documentation
Sash
bracket / art. no.
• Application
Frame
bracketdrawings
/ art. no.suitable for window and facade
manufacturers available
Scope of supply
Page 22
Complete, including fixing materials
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
KA bracket sets for
Schüco® Series AWS
(exept AWS 102)
Application
Top-hung window, outwards opening
KA-BS036-VFO
KA
KA-TW
Type
KA-BS036-VFO
KA-TW-BS039-VFO
Art. no. set
26.ACS.KS
26.ACV.KS
Installation type
surfaced mounted
surfaced mounted
Frame material
aluminium window
aluminium window
AD drawing number
AD00139
AD00140
Components
KA-BS036-VFO
KA-TW-BS039-VFO
Sash bracket / art. no.
KA-SB013 / 26.AEK.KS
KA-SB013 /2x 26.AEK.KS
Frame bracket / art. no.
KA-FB012 / 26.ACR.KS
KA-FB012 / 26.ACR.KS
Scope of supply
Complete, including fixing materials
KA-BS036-VFO
© 2012 D+H Mechatronic AG, Ammersbek
KA-TW-BS039-VFO
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 23
Series KA
Product information
KA-TW-BS039-VFO
KA bracket sets for
Installation solutions for projected top-hung vent,
outward opening, and parallel outward opening window
Arguments
Application for D+H installation solutions
Easy installation
• Optimal adaptation of the bracket to the particular profile
system guarantees high functional safety and simple
installation
• The bracket sets were tested in combination with an automatic
SHEV according to DIN EN 12101-2 (the classification reports
are still being produced in part).
Design
• Even without cladding, the drive blends harmoniously into the
appearance of a transom and mullion facade
Large opening widths
• Depending on the used friction hinges, openings of up to 45°
are possible
Product information
Type
Complete scope of supply
Art.
set
• Allno.
materials
necessary for fixing are included in the scope of
supply
of
the
Installation typebracket set
Frame material
Special
colours
AD
drawing
number
• All brackets can be supplied in a special colour as an option,
according to RAL Classic (colour chart RAL-K5)
Components
(wet-painted or powder-coated)
Sash bracket / art. no.
Frame bracket / art. no.
Documentation
• Application drawings suitable for window and facade
manufacturers available
Scope of supply
Page 24
Complete, including fixing materials
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
KA bracket sets for
Schüco® Series AWS 102 SK
(sash frame 339 470)
Application
Projected top-hung vent, outward opening
Parallel outward opening window
KA-BS001-VFO
KA-TW-BS045-VFO
KA
KA-TW
Type
KA-BS001-VFO
KA-TW-BS045-VFO
Art. no. set
26.AAF.KS
26.ADB.KS
Installation type
surfaced mounted
surfaced mounted
Frame material
aluminium window
aluminium window
AD drawing number
AD00045
AD00133
Components
KA-BS001-VFO
KA-TW-BS045-VFO
Sash bracket / art. no.
KA-SB001 / 26.AAA.KS
KA-SB001 /2x 26.AAA.KS
Frame bracket / art. no.
KA-FB002 / 26.AAB.KS
KA-FB002 / 26.AAB.KS
Scope of supply
Complete, including fixing materials
KA-BS001-VFO
© 2012 D+H Mechatronic AG, Ammersbek
KA-TW-BS045-VFO
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 25
Series KA
Product information
KA-BS001-VFO
KA-TW-BS045-VFO
KA bracket sets for
Schüco® Series AWS 102 SK
(sash frame 339 490)
Application
Projected top-hung vent, outward opening
Parallel outward opening window
KA-BS051-VFO
KA-TW-BS068-VFO
Product information
KA-BS051-VFO
KA-TW-BS068-VFO
KA
KA-TW
Type
KA-BS051-VFO
KA-TW-BS068-VFO
Art. no. set
26.ADJ.KS
26.AEG.KS
Installation type
surfaced mounted
surfaced mounted
Frame material
aluminium window
aluminium window
AD drawing number
AD00045
AD00133
Components
KA-BS051-VFO
KA-TW-BS068-VFO
Sash bracket / art. no.
KA-SB011 / 26.ADH.KS
KA-SB011 /2x 26.ADH.KS
Frame bracket / art. no.
KA-FB002 / 26.AAB.KS
KA-FB002 / 26.AAB.KS
Scope of supply
Complete, including fixing materials
KA-BS051-VFO
Page 26
KA-TW-BS068-VFO
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
KA bracket sets for
Installation solutions for turning sash windows
Arguments
Application for D+H installation solutions
Efficiency
• Time-saving installation through optimal adaptation of the
bracket set for the particular profile
• no additional adaptation work on the bracket necessary
EN 12101-2 tested
• The bracket sets were tested in combination with an automatic
SHEV according to DIN EN 12101-2 (classification reports are
still being produced in part).
Functional safety
• Optimum adaptation of the bracket to the particular drive
system guarantees complete functional safety
Complete scope
of supply
Product
information
• All materials necessary for fixing are included in the scope of
Type
supply of the bracket set
Art. no. set
Installation
type
Special colours
Frame
material
• All brackets can be supplied in a special colour as an option,
AD
drawing to
number
according
RAL Classic (colour chart RAL-K5)
(wet-painted or powder-coated)
Components
Documentation
Sash
bracket / art. no.
• Application
Frame
bracketdrawings
/ art. no.suitable for window and facade
manufacturers available
Complete, including fixing materials
© 2012 D+H Mechatronic AG, Ammersbek
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 27
Series KA
Scope of supply
KA bracket sets for
Schüco® Series AWS
(exept Series AWS 102)
Application
Turning-sash window, inwards opening
Ÿmin. space on the frame:
45 mm
Ÿmin. space on the frame:
45 mm
KA-BS085-VFIS
KA-BS085-VFIS
DIN-right
KA-TW-BS086-VFIS
DIN-left
Product information
KA
KA-TW
Type
KA-BS085-VFIS
KA-TW-BS086-VFIS
Art. no. set
26.AFL.KS
26.AFM.KS
Installation type
surfaced mounted
surfaced mounted
Frame material
aluminium window
aluminium window
AD drawing number
AD00143
AD00144
Components
KA-BS085-VFIS
KA-TW-BS086-VFIS
Sash bracket / art. no.
–
–
Frame bracket / art. no.
–
–
Scope of supply
Complete, including fixing materials
KA-BS085-VFIS
Page 28
KA-TW-BS086-VFIS
KA-TW-BS086-VFIS
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
KA bracket sets for
Colour option
KA-BS/C (26.AAV.KS)
Order
Application
and delivery
RAL color system
order
· The RAL colour systems are standards of the RAL institute for
colours. Today the „RAL CLASSIC“ system is well-known: This
system exists since 1927 and is characterized by 210 differents
colours and a four-digit numbering system.
Please provide the following information for an order:
· Sash bracket and frame bracket will be varnished or powder coated
according to RAL color chart K5.
· By default the KA bracket sets are delivered as follows:
– stainless steel, tumbled
– aluminium, nature anodized (similar silver)
– cast elements, powder coated similar RAL 9006
· Colour option: Type: KA-BS/C, Art.-No.: 26.AAV.KS
· Type of bracket which should be varnished/powder coated e.g.: KABS022-VFO (see planning aid for searching and finding the
appropriate bracket set)
· colour (four-digit RAL label) if possible including colour name
· Technique (varnish or powder coating)
· Quantity
· Packaging (single pack or multipack)
· Price for varnishing/powder coating depends on the number of
items which have to be varnished.
Product information
Colour option KA, KA-TW, KA-SW bracket
Type
KA-BS/C
Art.-No.
Set
Art. no. set
26.AAV.KS
Colour
system
Installation
type
RAL Classic K5 (more colors on request)
Technique
Frame material
varnish, powder coating
Scope
of supply
AD drawing
number
same as standard
Components
Order
example
Example
Type
Art.-No./ color
option
Sash /bracket
art. no.
KA-BS/C / 26.AAV.KS
Type
Frame bracket / art. no.
KA-BS022-VFO
Colour system
RAL 9016
Technique
varnish
Quantity
Packaging
Scope of supply
100
Complete, multipack
including fixing materials
Example bracket set KA-BS022-VFO
Varnished/powder coated components are shown in
red for clarification. Screws and splints will not be
varnished/powder coated.
© 2012 D+H Mechatronic AG, Ammersbek
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 29
Series KA
Components will be varnished/powder coated in RAL xxxx
KA bracket sets for
Application
Product information
Type
Art. no. set
Installation type
Frame material
AD drawing number
Components
Sash bracket / art. no.
Frame bracket / art. no.
Scope of supply
Page 30
Complete, including fixing materials
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
CDP bracket sets for
Mounting solutions for roof windows
Application for D+H installation solutions
Arguments
Outward opening roof window, opposite mounted
Efficiency
• Time-saving installation through optimal adaptation
of the bracket set to the particular profile system
High strength
• Installation solutions designed for maximum load-bearing
(up to 1,500N)
DIN EN 12101-2 tested
• Bracket sets and their installation solutions are
in certification
Quick fitting
• Brackets are ready for immediate installation - no additional
adaptation information
work on the brackets is necessary
Product
opposite mounted
Type
Functional safety
Art. no. set
• Optimum adaptation of the bracket to the particular drive
Drive
used
CDP; all versions
system
guarantees complete functional safety
Art. no. variant
AD drawingscope
number
Complete
of supply
• All necessary fixing materials are included in the scope of
Components
supply of the bracket set
Sash bracket / art. no.
Frame bracket / art. no.
Design
bracket
/ art. no.
•Basis
Functional
design
which also satisfies high aesthetic
requirements
Thread
plate / art. no.
Adapter bracket / art. no.
Special
Scope ofcolours
supply
Complete, including fixing materials
• All brackets can be supplied in a special colour as an option,
according to RAL Classic (colour chart RAL-K5)
(wet-painted or powder-coated)
Documentation
© 2012 D+H Mechatronic AG, Ammersbek
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 31
Series CDP
• Application drawings suitable for window and facade
manufacturers available
CDP bracket sets for
Schüco® Series AWS 57 RO
(frame profile 331 810, 331 820)
Application
Outward opening roof window, opposite mounted
Product information
opposite mounted
Type
CDP-BS003-OM
Art. no. set
26.CAL.KS
Drive used
CDP; all versions
Art. no. variant
26.CBC.KS
AD drawing number
AD00244
Components
CDP-BS003-OM
Sash bracket / art. no.
CDP-SB001 / 26.CAA.KS
Frame bracket / art. no.
CDP-FB003 / 26.CAG.KS
Basis bracket / art. no.
–
Thread plate / art. no.
–
Adapter bracket / art. no.
–
Scope of supply
Complete, including fixing materials
CDP-BS003-OM
Page 32
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
CDP bracket sets for
Schüco® Series AWS 57 RO
(frame profile 369 770 / 369 780)
Application
Outward opening roof window, opposite mounted
Product information
opposite mounted
Type
CDP-BS001-OM
Art. no. set
26.CAJ.KS
Drive used
CDP; all versions
Art. no. variant
26.CBC.KS
AD drawing number
AD00243
Components
CDP-BS001-OM
Sash bracket / art. no.
CDP-SB001 / 26.CAA.KS
Frame bracket / art. no.
CDP-FB001 / 26.CAE.KS
Basis bracket / art. no.
–
Thread plate / art. no.
–
Adapter bracket / art. no.
–
Scope of supply
Complete, including fixing materials
© 2012 D+H Mechatronic AG, Ammersbek
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 33
Series CDP
CDP-BS001-OM
CDP bracket sets for
Colour option
CDP-BS/C (26.CBC.KS)
Application
Order
and delivery
Outward
Option opening roof window, opposite mounted
Order
· You can order the complete bracket set as well as sash bracket,
frame bracket and basis bracket as colour option.
Please provide the following information for an order:
· Colour option:
– The RAL color systems are standards of the RAL institute for
colours. Today the „RAL CLASSIC“ system is well-known: This
system exists since 1927 and is characterized by 210 differents
colours and a four-digit numbering system.
– Sash bracket, frame bracket and basis bracket will be varnished or
powder coated according to RAL colour chart K5.
· Type of bracket which should be varnished/powder coated e.g.:
CDP-BS004-OM (see planning aid for searching and finding the
appropriate bracket set)
· Colour option: Type: CDP-BS/C, Art.-No.: 26.CBC.KS
· colour (four-digit RAL label) if possible including colour name
· Technique (varnish or powder coating)
· Quantity
· Packaging (single pack or multipack)
· Price for varnishing/powder coating depends on the number of items
which have to be varnished.
Product information
Colour option
CDP bracket
opposite
mounted
Type
CDP-BS/C
Art.-No.
Set
Art. no. set
26.CBC.KS
Colour
system
Drive used
CDP;Classic
all versions
RAL
K5 (more colours on request)
Technique
Art. no. variant
varnish, powder coating
Scope
of supply
AD drawing
number
same as standard
Components
Order
example
Example
Sash /bracket
art. no.option
Type
Art.-No./ colour
CDP-BS/C / 26.CBC.KS
Frame bracket / art. no.
Type
CDP-BS004-OM
Basis bracket
Colour
system/ art. no.
RAL 9016
Thread plate / art. no.
Technique
varnish
Adapter bracket / art. no.
Quantity
100
Complete, including fixing materials
multipack
Scope of supply
Packaging
Example bracket set CDP-BS004-OM
Varnished/powder coated components are shown in
red for clarification. Screws and splints will not be
varnished/powder coated.
Components will be varnished/powder coated in RAL xxxx
Page 34
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
ZA bracket sets for
Mounting solutions for roof windows
Application for D+H installation solutions
Arguments
Outward opening roof window, opposite mounted
Outward opening roof window, side mounted
Efficiency
• Time-saving installation through optimal adaptation
of the bracket set to the particular profile system
High strength
• Installation solutions designed for maximum load-bearing
(up to 1,500N)
DIN EN 12101-2 tested
• Bracket sets and their installation solutions are tested
and certified according to DIN EN12101-2
Quick fitting
• Brackets are ready for immediate installation - no additional
adaptation information
work on the brackets is necessary
Product
opposite mounted
Type
Functional safety
Art. no. set
• Optimum adaptation of the bracket to the particular drive
Drive
used
ZA; all versions
system
guarantees complete functional safety
Art. no. variant
side mounted
ZA; all versions
AD drawingscope
number
Complete
of supply
• All necessary fixing materials are included in the scope of
Components
supply of the bracket set
Sash bracket / art. no.
Frame bracket / art. no.
Design
bracket
/ art. no.
•Basis
Functional
design
which also satisfies high aesthetic
requirements
Thread
plate / art. no.
Adapter bracket / art. no.
Special
Scope ofcolours
supply
Complete, including fixing materials
• All brackets can be supplied in a special colour as an option,
according to RAL Classic (colour chart RAL-K5)
(wet-painted or powder-coated)
Documentation
© 2012 D+H Mechatronic AG, Ammersbek
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 35
Series ZA
• Application drawings suitable for window and facade
manufacturers available
ZA bracket sets for
Schüco® Series AWS 57 RO
(frame profile 331 810, 331 820)
Application
Outward opening roof window, opposite mounted
Product information
Outward opening roof window, side mounted
opposite mounted
side mounted
Type
ZA-BS030-OM
ZA-BS031-SM
Art. no. set
27.BCR.KS
27.BCP.KS
Drive used
ZA; all versions
ZA; all versions
Art. no. variant
27.BAV.KS
27.BAV.KS
AD drawing number
AD00125
AD00124
Components
ZA-BS030-OM
ZA-BS031-SM
Sash bracket / art. no.
ZA-SB019-AWS57RO-OM / 27.BCJ.KS
ZA-SB020-AWS57RO-SM / 27.BCK.KS
Frame bracket / art. no.
ZA-FB007 / 27.BCL.KS
ZA-FB007 / 27.BCL.KS
Basis bracket / art. no.
–
–
Thread plate / art. no.
–
–
Adapter bracket / art. no.
–
–
Scope of supply
Complete, including fixing materials
ZA-BS030-OM
Page 36
ZA-BS031-SM
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
ZA bracket sets for
Schüco® Series AWS 57 RO
(frame profile 369 770 / 369 780)
Application
Outward opening roof window, opposite mounted
opposite mounted
side mounted
Type
ZA-BS028-OM
ZA-BS029-SM
Art. no. set
27.BCM.KS
27.BCN.KS
Drive used
ZA; all versions
ZA; all versions
Art. no. variant
27.BAV.KS
27.BAV.KS
AD drawing number
AD00127
AD00126
Components
ZA-BS028-OM
ZA-BS029-SM
Sash bracket / art. no.
ZA-SB019-AWS57RO-OM / 27.BCJ.KS
ZA-SB020-AWS57RO-SM / 27.BCK.KS
Frame bracket / art. no.
ZA-FB005 / 27.BBM.KS
ZA-FB005 / 27.BBM.KS
Basis bracket / art. no.
–
–
Thread plate / art. no.
–
–
Adapter bracket / art. no.
–
–
Scope of supply
ZA-BS028-OM
© 2012 D+H Mechatronic AG, Ammersbek
Complete, including fixing materials
ZA-BS029-SM
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 37
Series ZA
Product information
Outward opening roof window, side mounted
ZA bracket sets for
Schüco® Series Royal S 88D
Application
Outward opening roof window, opposite mounted
Outward opening roof window, side mounted
· The thread plate (see red circle)
of the frame bracket must first be
inserted into the space of the
profile and appropriately fixed
before assembly of the sash
frame parts. For more detailled
information on assembly, please
refer to the D+H application
drawings.
· The thread plate (see red circle)
of the frame bracket must first be
inserted into the space of the
profile and appropriately fixed
before assembly of the sash
frame parts. For more detailled
information on assembly, please
refer to the D+H application
drawings.
Product information
opposite mounted
side mounted
Type
ZA-BS010-OM
ZA-BS009-SM
Art. no. set
27.BBC.KS
27.BAT.KS
Drive used
ZA; all versions
ZA; all versions
Art. no. variant
27.BAV.KS
27.BAV.KS
AD drawing number
AD00099
AD00098
Components
ZA-BS010-OM
ZA-BS009-SM
Sash bracket / art. no.
ZA-SB009-RS88D-OM / 27.BBA.KS
ZA-SB010-RS88D-SM / 27.BBB.KS
Frame bracket / art. no.
ZA-FB003-OM / 27.BAN.KS
–
Basis bracket / art. no.
–
ZA-BB001-SM / 27.BAC.KS
Thread plate / art. no.
–
–
Adapter bracket / art. no.
–
AB001-RS88D-SM / 27.CMA.KS
Scope of supply
Complete, including fixing materials
ZA-BS010-OM
Page 38
ZA-BS009-SM
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
ZA bracket sets for
Schüco® Series Royal S 106D
Application
Outward opening roof window, opposite mounted
Outward opening roof window, side mounted
· The thread plate (see red circle)
of the frame bracket must first be
inserted into the space of the
profile and appropriately fixed
before assembly of the sash
frame parts. For more detailled
information on assembly, please
refer to the D+H application
drawings.
· The thread plate (see red circle)
of the frame bracket must first be
inserted into the space of the
profile and appropriately fixed
before assembly of the sash
frame parts. For more detailled
information on assembly, please
refer to the D+H application
drawings.
opposite mounted
side mounted
Type
ZA-BS012-OM
ZA-BS011-SM
Art. no. set
27.BBE.KS
27.BBD.KS
Drive used
ZA; all versions
ZA; all versions
Art. no. variant
27.BAV.KS
27.BAV.KS
AD drawing number
AD00101
AD00100
Components
ZA-BS012-OM
ZA-BS011-SM
Sash bracket / art. no.
ZA-SB003-RS106D-OM / 27.BAW.KS
ZA-SB004-RS106D-SM / 27.BAX.KS
Frame bracket / art. no.
ZA-FB003-OM / 27.BAN.KS
ZA-FB004-SM / 27.BAS.KS
Basis bracket / art. no.
–
–
Thread plate / art. no.
–
–
Adapter bracket / art. no.
–
–
Scope of supply
ZA-BS012-OM
© 2012 D+H Mechatronic AG, Ammersbek
Complete, including fixing materials
ZA-BS011-SM
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 39
Series ZA
Product information
ZA bracket sets for
Colour option
ZA-BS/C (27.BAV.KS)
Application
Order
and delivery
Outward
Option opening roof window, opposite mounted
Outward
Order opening roof window, side mounted
· You can order the complete bracket set as well as sash bracket,
frame bracket and basis bracket as colour option.
Please provide the following information for an order:
· Colour option:
– The RAL color systems are standards of the RAL institute for
colours. Today the „RAL CLASSIC“ system is well-known: This
system exists since 1927 and is characterized by 210 differents
colours and a four-digit numbering system.
– Sash bracket, frame bracket and basis bracket will be varnished or
powder coated according to RAL colour chart K5.
· Type of bracket which should be varnished/powder coated e.g.: ZABS004-OM (see planning aid for searching and finding the
appropriate bracket set)
· Colour option: Type: ZA-BS/C, Art.-No.: 27.BAV.KS
· colour (four-digit RAL label) if possible including colour name
· Technique (varnish or powder coating)
· Quantity
· Packaging (single pack or multipack)
· Price for varnishing/powder coating depends on the number of items
which have to be varnished.
Product information
Colour option
ZA bracket
opposite
mounted
Type
ZA-BS/C
Art.-No.
Set
Art. no. set
27.BAV.KS
side mounted
Colour
system
Drive used
ZA; all
versions
RAL
Classic
K5 (more colors on request)
Technique
Art. no. variant
varnish, powder coating
Scope
of supply
AD drawing
number
same as standard
Components
Order
example
Example
Sash /bracket
art. no.option
Type
Art.-No./ colour
ZA-BS/C / 27.BAV.KS
Frame bracket / art. no.
Type
ZA-BS004-OM
Basis bracket
Colour
system/ art. no.
RAL 9016
Thread plate / art. no.
Technique
varnish
Adapter bracket / art. no.
Quantity
100
Complete, including fixing materials
multipack
Scope of supply
Packaging
ZA; all versions
Example bracket set ZA-BS004-OM
Varnished/powder coated components are shown in
red for clarification. Screws and splints will not be
varnished/powder coated.
Components will be varnished/powder coated in RAL xxxx
Page 40
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
SXD bracket sets for
Mounting solutions for roof windows
Application for D+H installation solutions
Arguments
Outward opening roof window, opposite mounted
Outward opening roof window, side mounted
Efficiency
• Time-saving installation through optimal adaptation
of the bracket set to the particular profile system
High strength
• Installation solutions designed for maximum load-bearing
(up to 1,500N)
Quick fitting
• Brackets are ready for immediate installation - no additional
adaptation work on the brackets is necessary
Functional safety
• Optimum adaptation of the bracket to the particular drive
system guarantees
complete functional safety
Product
information
opposite mounted
Type
Complete scope of supply
Art. no. set
• All necessary fixing materials are included in the scope of
Drive
used
SXD; all versions
supply
of the bracket set
Art. no. variant
side mounted
SXD; all versions
AD drawing number
Design
• Functional design which also satisfies high aesthetic
Components
requirements
Sash bracket / art. no.
Frame bracket
/ art. no.
Special
colours
bracketcan
/ art.beno.
•Basis
All brackets
supplied in a special colour as an option,
according
to /RAL
Classic (colour chart RAL-K5)
Thread
plate
art. no.
(wet-painted or powder-coated)
Adapter bracket / art. no.
Documentation
© 2012 D+H Mechatronic AG, Ammersbek
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 41
Series SXD
• Application drawings suitable for window and facade
manufacturers available
SXD bracket sets for
Schüco® Series AWS 57 RO
(frame profile 331 820)
Application
Outward opening roof window, opposite mounted
Product information
Outward opening roof window, side mounted
opposite mounted
side mounted
Type
SXD-BS002-OM
SXD-BS001-SM
Art. no. set
27.CAL.KS
27.CAK.KS
Drive used
SXD; all versions
SXD; all versions
Art. no. variant
27.CAV.KS
27.CAV.KS
AD drawing number
AD00158
AD00157
Components
SXD-BS002-OM
SXD-BS001-SM
Sash bracket / art. no.
ZA-SB019-AWS57RO-OM / 27.BCJ.KS
ZA-SB020-AWS57RO-SM / 27.BCK.KS
Frame bracket / art. no.
SXD-FB006 / 27.CAF.KS
SXD-FB006 / 27.CAF.KS
Basis bracket / art. no.
–
–
Thread plate / art. no.
–
–
Adapter bracket / art. no.
–
–
SXD-BS002-OM
Page 42
SXD-BS001-SM
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
SXD bracket sets for
Schüco® Series AWS 57 RO
(frame profile 369 780)
Application
Outward opening roof window, opposite mounted
opposite mounted
side mounted
Type
SXD-BS004-OM
SXD-BS003-SM
Art. no. set
27.CAN.KS
27.CAM.KS
Drive used
SXD; all versions
SXD; all versions
Art. no. variant
27.CAV.KS
27.CAV.KS
AD drawing number
AD00160
AD00159
Components
SXD-BS004-OM
SXD-BS003-SM
Sash bracket / art. no.
ZA-SB019-AWS57RO-OM / 27.BCJ.KS
ZA-SB020-AWS57RO-SM / 27.BCK.KS
Frame bracket / art. no.
SXD-FB004 / 27.CAD.KS
SXD-FB004 / 27.CAD.KS
Basis bracket / art. no.
–
–
Thread plate / art. no.
–
–
Adapter bracket / art. no.
–
–
SXD-BS004-OM
© 2012 D+H Mechatronic AG, Ammersbek
SXD-BS003-SM
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 43
Series SXD
Product information
Outward opening roof window, side mounted
SXD bracket sets for
Schüco® Series Royal S 88D
Application
Outward opening roof window, opposite mounted
Outward opening roof window, side mounted
· The thread plate (see red circle)
of the frame bracket must first be
inserted into the space of the
profile and appropriately fixed
before assembly of the sash
frame parts. For more detailled
information on assembly, please
refer to the D+H application
drawings.
· The thread plate (see red circle)
of the frame bracket must first be
inserted into the space of the
profile and appropriately fixed
before assembly of the sash
frame parts. For more detailled
information on assembly, please
refer to the D+H application
drawings.
Product information
opposite mounted
side mounted
Type
SXD-BS006-OM
SXD-BS005-SM
Art. no. set
27.CAR.KS
27.CAP.KS
Drive used
SXD; all versions
SXD; all versions
Art. no. variant
27.CAV.KS
27.CAV.KS
AD drawing number
AD00162
AD00161
Components
SXD-BS006-OM
SXD-BS005-SM
Sash bracket / art. no.
ZA-SB009-RS88D-OM / 27.BBA.KS
ZA-SB010-RS88D-SM / 27.BBB.KS
Frame bracket / art. no.
SXD-FB002 / 27.CAB.KS
–
Basis bracket / art. no.
–
SXD-BB001 / 27.CAH.KS
Thread plate / art. no.
–
–
Adapter bracket / art. no.
–
AB001-RS88D-SM / 27.CMA.KS
SXD-BS006-OM
Page 44
SXD-BS005-SM
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
SXD bracket sets for
Schüco® Series Royal S 106D
Application
Outward opening roof window, opposite mounted
Outward opening roof window, side mounted
· The thread plate (see red circle)
of the frame bracket must first be
inserted into the space of the
profile and appropriately fixed
before assembly of the sash
frame parts. For more detailled
information on assembly, please
refer to the D+H application
drawings.
· The thread plate (see red circle)
of the frame bracket must first be
inserted into the space of the
profile and appropriately fixed
before assembly of the sash
frame parts. For more detailled
information on assembly, please
refer to the D+H application
drawings.
opposite mounted
side mounted
Type
SXD-BS008-OM
SXD-BS007-SM
Art. no. set
27.CAT.KS
27.CAS.KS
Drive used
SXD; all versions
SXD; all versions
Art. no. variant
27.CAV.KS
27.CAV.KS
AD drawing number
AD00164
AD00163
Components
SXD-BS008-OM
SXD-BS007-SM
Sash bracket / art. no.
ZA-SB003-RS106D-OM / 27.BAW.KS
ZA-SB004-RS106D-SM / 27.BAX.KS
Frame bracket / art. no.
SXD-FB002 / 27.CAB.KS
SXD-FB003 / 27.CAC.KS
Basis bracket / art. no.
–
–
Thread plate / art. no.
–
–
Adapter bracket / art. no.
–
–
SXD-BS008-OM
© 2012 D+H Mechatronic AG, Ammersbek
SXD-BS007-SM
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 45
Series SXD
Product information
SXD bracket sets for
Colour option
SXD-BS/C (27.CAV.KS)
Application
Order
and delivery
Option
Outward opening roof window, opposite mounted
Order
Outward opening roof window, side mounted
· You can order the complete bracket set as well as sash bracket,
frame bracket and basis bracket as colour option.
Please provide the following information for an order:
· Colour option:
– The RAL color systems are standards of the RAL institute for
colours. Today the „RAL CLASSIC“ system is well-known: This
system exists since 1927 and is characterized by 210 differents
colours and a four-digit numbering system.
– Sash bracket, frame bracket and basis bracket will be varnished or
powder coated according to RAL colour chart K5.
· Type of bracket which should be varnished/powder coated e.g.:
SXD-BS019-OM (see planning aid for searching and finding the
appropriate bracket set)
· Colour option: Type: SXD-BS/C, Art.-No.: 27.CAV.KS
· colour (four-digit RAL label) if possible including colour name
· Technique (varnish or powder coating)
· Quantity
· Packaging (single pack or multipack)
· Price for varnishing/powder coating depends on the number of items
which have to be varnished.
Product information
Colour
option
SXD bracket
opposite
mounted
Type
Type
SXD-BS/C
Art.-No.
Set
Art. no. set
27.CAV.KS
side mounted
Colour
system
Drive used
SXD;Classic
all versions
RAL
K5 (more colors on request)
Technique
Art. no. variant
varnish, powder coating
Scope
of supply
AD drawing
number
same as standard
Components
Order
example
Example
Sash /bracket
art. no.option
Type
Art.-No./ colour
SXD-BS/C / 27.CAV.KS
Frame bracket / art. no.
Type
SXD-BS019-OM
Basis bracket
Colour
system/ art. no.
RAL 9016
Thread plate / art. no.
Technique
varnish
Adapter bracket / art. no.
Quantity
100
Packaging
multipack
SXD; all versions
Example bracket set SXD-BS019-OM
Varnished/powder coated components are shown in
red for clarification. Screws and splints will not be
varnished/powder coated.
Components will be varnished/powder coated in RAL xxxx
Page 46
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
DXD bracket sets for
Mounting solutions for roof windows
Application for D+H installation solutions
Arguments
Outward opening roof window, opposite mounted
Outward opening roof window, side mounted
Efficiency
• Time-saving installation through optimal adaptation of the
bracket set to the particular profile system
High strength
• Installation solutions designed for maximum load-bearing (up to
3000N)
EN 12101-2 tested
• Bracket sets and their fitting solutions are tested and certified
according to EN12101-2
Quick fitting
• Brackets are ready for immediate installation - no additional
adaptation work on the brackets is necessary
Product information
opposite mounted
Functional safety
Type
• Optimum adaptation of the bracket to the particular drive
Art.
no. set
system
guarantees complete functional safety
Drive used
DXD; all versions
Art. no. variant
27.AAV.KS
Complete
scope of supply
AD
drawing
number
• All necessary fixing materials are included in the scope of
side mounted
DXD; all versions
27.AAV.KS
supply of the bracket set
Components
Sash bracket / art. no.
Design
bracket
/ art.which
no. also satisfies high aesthetic
•Frame
Functional
design
requirements
Basis bracket /art. no.
Thread plate / art. no.
Special
Support colours
spindle / art. no.
•Scope
All brackets
can be supplied in a special colour
as an option,
of supply
Complete,
including fixing materials
according to RAL Classic (colour chart RAL-K5)
(wet-painted or powder-coated)
Documentation
© 2012 D+H Mechatronic AG, Ammersbek
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 47
Series DXD
• Application drawings suitable for window and facade
manufacturers available
DXD bracket sets for
Schüco® Series AWS 57 RO
(sash profile 331 810, 331 820)
Application
Outward opening roof window, opposite mounted
Product information
Outward opening roof window, side mounted
opposite mounted
side mounted
Type
DXD-BS028-OM
DXD-BS029-SM
Art. no. set
27.ACW.KS
27.ACX.KS
Drive used
DXD; all versions
DXD; all versions
Art. no. variant
27.AAV.KS
27.AAV.KS
AD drawing number
AD00129
AD00128
Components
DXD-BS028-OM
DXD-BS029-SM
Sash bracket / art. no.
DXD-SB015-OM / 27.AAW.KS
DXD-SB037-SM / 27.ACV.KS
Frame bracket / art. no.
DXD-FB010-OM / 27.ACY.KS
DXD-FB003-SM / 27.ABR.KS
Basis bracket /art. no.
–
–
Thread plate / art. no.
–
–
Support spindle / art. no.
37mm / 27.AZZ.KS
75mm / 27.AZX.KS
Scope of supply
Complete, including fixing materials
DXD-BS028-OM
Page 48
DXD-BS029-SM
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
DXD bracket sets for
Schüco® Series AWS 57 RO
(sash profile 369 770, 369 780)
Application
Outward opening roof window, opposite mounted
opposite mounted
side mounted
Type
DXD-BS028-OM
DXD-BS029-SM
Art. no. set
27.ACW.KS
27.ACX.KS
Drive used
DXD; all versions
DXD; all versions
Art. no. variant
27.AAV.KS
27.AAV.KS
AD drawing number
AD00131
AD00130
Components
DXD-BS028-OM
DXD-BS029-SM
Sash bracket / art. no.
DXD-SB015-OM / 27.AAW.KS
DXD-SB037-SM / 27.ACV.KS
Frame bracket / art. no.
DXD-FB010-OM / 27.ACY.KS
DXD-FB003-SM / 27.ABR.KS
Basis bracket /art. no.
–
–
Thread plate / art. no.
–
–
Support spindle / art. no.
37mm / 27.AZZ.KS
75mm / 27.AZX.KS
Scope of supply
Complete, including fixing materials
DXD-BS028-OM
© 2012 D+H Mechatronic AG, Ammersbek
DXD-BS029-SM
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 49
Series DXD
Product information
Outward opening roof window, side mounted
DXD bracket sets for
Schüco® Series Royal S 88D
Application
Outward opening roof window, opposite mounted
Outward opening roof window, side mounted
· The thread plate (see red circle)
of the frame bracket must first be
inserted into the space of the
profile and appropriately fixed
before assembly of the sash
frame parts. For more detailled
information on assembly, please
refer to the D+H application
drawings.
· The thread plate (see red circle)
of the frame bracket must first be
inserted into the space of the
profile and appropriately fixed
before assembly of the sash
frame parts. For more detailled
information on assembly, please
refer to the D+H application
drawings.
Product information
opposite mounted
side mounted
Type
DXD-BS007-OM
DXD-BS008-SM
Art. no. set
27.ABD.KS
27.ABF.KS
Drive used
DXD; all versions
DXD; all versions
Art. no. variant
27.AAV.KS
27.AAV.KS
AD drawing number
AD00005
AD00004
Components
DXD-BS007-OM
DXD-BS008-SM
Sash bracket / art. no.
DXD-SB005-RS88D-OM / 27.AAN.KS
DXD-SB007-RS88D-SM / 27.AAL.KS
Frame bracket / art. no.
–
–
Basis bracket /art. no.
DXD-BB001-OM / 27.AAA.KS
DXD-BB003-SM / 27.AAE.KS
Thread plate / art. no.
–
–
Adapter
Support bracket
spindle // art
art.no.
no.
–
AB001-RS88D-SM / 27.CMA.KS
Scope of supply
Complete, including fixing materials
DXD-BS007-OM
Page 50
DXD-BS008-SM
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
DXD bracket sets for
Schüco® Series Royal S 106D
Application
Outward opening roof window, opposite mounted
Outward opening roof window, side mounted
· The thread plate (see red circle)
of the frame bracket must first be
inserted into the space of the
profile and appropriately fixed
before assembly of the sash
frame parts. For more detailled
information on assembly, please
refer to the D+H application
drawings.
· The thread plate (see red circle)
of the frame bracket must first be
inserted into the space of the
profile and appropriately fixed
before assembly of the sash
frame parts. For more detailled
information on assembly, please
refer to the D+H application
drawings.
opposite mounted
side mounted
Type
DXD-BS005-OM
DXD-BS006-SM
Art. no. set
27.AAP.KS
27.AAR.KS
Drive used
DXD; all versions
DXD; all versions
Art. no. variant
27.AAV.KS
27.AAV.KS
AD drawing number
AD00003
AD00002
Components
DXD-BS005-OM
DXD-BS006-SM
Sash bracket / art. no.
DXD-SB001-RS106D-OM / 27.AAD.KS
DXD-SB003-RS106D-SM / 27.AAF.KS
Frame bracket / art. no.
–
–
Basis bracket /art. no.
DXD-BB001-OM / 27.AAA.KS
DXD-BB003-SM / 27.AAE.KS
Thread plate / art. no.
–
–
Support spindle / art. no.
–
–
Scope of supply
Complete, including fixing materials
DXD-BS005-OM
© 2012 D+H Mechatronic AG, Ammersbek
DXD-BS006-SM
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
Page 51
Series DXD
Product information
DXD bracket sets for
Colour option
DXD-BS/C (27.AAV.KS)
Order
and delivery
Application
Option opening roof window, opposite mounted
Outward
Order opening roof window, side mounted
Outward
· You can order the complete bracket set as well as sash bracket,
frame bracket and basis bracket as colour option.
Please provide the following information for an order:
· Colour option:
– The RAL color systems are standards of the RAL institute for
colours. Today the „RAL CLASSIC“ system is well-known: This
system exists since 1927 and is characterized by 210 differents
colours and a four-digit numbering system.
– Sash bracket, frame bracket and basis bracket will be varnished or
powder coated according to RAL colour chart K5.
· Type of bracket which should be varnished/powder coated e.g.:
DXD-BS012-OM (see planning aid for searching and finding the
appropriate bracket set)
· Colour option: Type: DXD-BS/C, Art.-No.: 27.AAV.KS
· colour (four-digit RAL label) if possible including colour name
· Technique (varnish or powder coating)
· Quantity
· Packaging (single pack or multipack)
· Price for varnishing/powder coating depends on the number of items
which have to be varnished.
Product information
Colour option
DXD bracket
opposite
mounted
Type
Art.-No.
Set
Art. no. set
DXD-BS/C
side mounted
27.AAV.KS
RAL Classic
K5 (more colors on request)
DXD;
all versions
Colour
system
Drive used
Technique
Art. no. variant
Scope
of supply
AD drawing
number
varnish, powder coating
27.AAV.KS
same as standard
Order
example
Components
Example
Type /bracket
Art.-No./ art.
colour
Sash
no.option
DXD-BS/C / 27.AAV.KS
Type bracket / art. no.
Frame
DXD-BS012-SM
Colourbracket
system/art. no.
Basis
RAL 9016
Technique
Thread
plate / art. no.
varnish
Quantity spindle / art. no.
Support
100
Packaging
Scope
of supply
Complete, including fixing materials
multipack
DXD; all versions
27.AAV.KS
Example bracket set DXD-BS012-OM
Varnished/powder coated components are shown in
red for clarification. Screws and splints will not be
varnished/powder coated.
Components will be varnished/powder coated in RAL xxxx
Page 52
D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany
Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com
© 2012 D+H Mechatronic AG, Ammersbek
WWW.DH-PARTNER.COM
© 2012 D+H Mechatronic AG, Ammersbek_99.760.43, 1.0/07/12
D+H Mechatronic AG
Georg-Sasse-Straße 28-32
D-22949 Ammersbek
Germany
Tel: +49 40 60565 0
Fax:+49 40 60565 222
E-Mail: [email protected]