How to Connect to Skyflo Beer Monitor

Wireless liquor Control system
How to Connect to Skyflo Beer Monitor
Cut the Beer Line and insert the flow meter, plug the connector to Skyflo Beer Monitor and
connect to Power, installation is done in a few minutes.
One Beer Monitor can control up to 4 beer lines.
Instructions of connecting the UK Beverage Meter 300-010 (SBMFS – 1622)
There are 3 pins from left to right of each connector on our Beer Monitor Control Box
(Total 4 connectors)
Beer Monitor
Connector - Flow meter
Pin 1
- Black cable (Ground)
Pin 2
- Blue cable (Out)
Pin 3
- Red cable (Power)
Yellow cable (not use)
Sky_Sales٠ Rev. 1.0-1/21/2013
Sky Channel Technologies Ltd.
Email : [email protected]
Page 1 of 1