How To Apply BorNiGuard Ceramic Anti-Spatter Tip and gas diffuser Nozzle 1. Remove the nozzle from the diffuser/tip assembly (see photo) 2. Scour the tip, diffuser and nozzle with Scotch Brite (remove oxides from copper/brass to ensure good adhesion). Tarnish remover can be used during scouring (optional). 3. Wipe parts with a cloth to remove debris or residual tarnish remover 4. Shake aerosol can for 30 seconds 5. Apply ceramic anti-spatter on tip and diffuser and nozzle from 8” distance in smooth layers 5. Wait until the film completely dries, about 60 seconds 6. Apply ceramic anti-spatter to nozzle from 8” distance. Spray the difficult areas first, e.g. inside front edge of nozzle. Spray remaining areas with smooth coating. 7. Re-attach nozzle 8. IMPORTANT: Place the aerosol can at a safe place away from the welding area. BorNiGuard is produced by Allchem LLC. For more information please visit www.BorNiGuard.com.
© Copyright 2020