How to maintain your new Cherrypine™ timber Congratulations on your purchase of Cherrypine™. To keep your timber looking good well into the future we recommend the following installation and maintenance program. Protecting your Cherrypine timber Use of a weather resistant finish or decking oil will reduce the effects of weathering. We recommend an initial application at time of installation and then on an annual or semi-annual basis depending on weathering conditions. Always follow the manufacturer’s directions. Fastening your Cherrypine timber Use only high quality hot dipped galvanised or stainless steel nails, screws or bolts. Resealing end cuts We recommend that any cut ends be resealed with Protim® Reseal or similar. Commercially available timber stain in a similar colour can also be added to the cut ends or machined surfaces if required. Both of these products are available at most hardware stores. AUSTRALIAN www.unitedtimbers.com.au | 1300 134 037 UNITED timbers Note: Colours shown in photo images may differ from actual product samples tested. Cherrypine™ is a trademark of Australia United Timbers. Protim® is a registered trademark of Osmose® Inc. or its subsidiaries. © 2008 Australian United Timbers. 002_0408.
© Copyright 2018