cetcme 2015

ABOUT THE INSTITUTE
UPTU
NIET
Presents
ISTE
An International Conference
&
Exhibition
On
Cutting Edge Technological Challenges
in Mechanical Engineering
(CETCME-2015)
In sync with
“MAKE IN INDIA”
21st & 22nd March, 2015
(Saturday and Sunday)
Announcement and Call for Papers
Conference Language: English
CONVENOR
Prof. P. Pachauri
Venue at:
DEPARTMENT OF MECHANICAL ENGINEERING
NOIDA INSTITUTE OF ENGINEERING
AND TECHNOLOGY (NIET)
19, Knowledge Park-II, Institutional Area, Greater
Noida-201 306 UP (INDIA)
Phone: 0120-2320062, 2320132
Website: www.niet.co.in
Noida Institute of Engineering & Technology, Greater
Noida, established in 2001, is a self financed institute
which offers high standard quality education to students
from all corners of the country. The Institute aims at
recognizing, respecting and nurturing the creative
potential of its students. The institute excels in all the
parameters earmarked by AICTE and Uttar Pradesh
Technical University, Lucknow, UP, India, Govt. of India,
New Delhi.
The Institute offers 9 UG and 14 PG programmes.
Presently, 5500 students are studying in different
courses in the Institute. The Institute is striving high in
terms of innovation and research. In the last one year the
students and faculty members have published 167
research papers in national /international journals of
repute
and
have
presented
86
papers
in
national/international conferences.
ABOUT UPTU, LUCKNOW
Uttar Pradesh Technical University, Lucknow was
established by the Government of Uttar Pradesh on 8 th May
2000. Under the University Act, 'Technical Education'
includes programmes of education, research and training in
Engineering, Technology, Architecture, Town Planning,
Pharmacy, Applied Arts & Crafts and such other
programmes that the Central Government may declare in
consultation with All India Council for Technical Education
(AICTE) by notification in Gazette.
The University is affiliating in nature and its jurisdiction
spans the entire state of UP in affiliating B.Tech., M.B.A.,
M.C.A., B.Arch., B. Pharm., M.Pharm., B.H.M.C.T., M.Tech.,
and Ph.D. programmes in 785 colleges/institutions
imparting graduate, postgraduate and doctoral level.
ABOUT ISTE
The Indian Society for Technical Education (ISTE) is
a national, professional, non-profit Society registered
under the Societies Registration Act of 1860. First started
in 1941 as the Association of Principals of Technical
Institutions (APTI), it was converted into "Indian Society
for Technical Education" in 1968 with a view to enlarge
its activities to advance the cause of technological
education in the country. ISTE has an Executive Council
at national level. It has active membership of more than
97,286 technical teachers, 5,66,466 student members,
more than 2,345 institutional members (including IITs,
IISC, NITs and other leading technical institutions),
1,166 faculty chapters and 1,280 students’ chapters
throughout the country.
ABOUT THE CONFERENCE
The objective of the conference is to bring together the
experts from industry and academia to exchange their
innovative ideas and share their experience in the field of
Mechanical Engineering. The conference will eventually
open opportunities for collaboration between industry/
universities/ institutes of National/ International repute
to foster synergic partnerships. It will provide a roadmap
for many people to be part of “Make in India” mission of
Hon’ble Prime Minister of India.
THEME
It is proposed to cover all aspects of Mechanical
Engineering during the conference. The main themes are:
Automation and Robotics
Automotive Engineering
Concurrent Engineering
Design of Machine Elements
Energy Conservation and Management
Entrepreneurship Development
Fluid Mechanics and Machinery
Heat and Mass Transfer
Industrial Engineering & Management
Advanced Manufacturing Processes
Manufacturing Systems
Material Science
Nanotechnology
New Trends in CAD/CAM/CAE/CAPP/CIM
Noise and vibration
Powder Metallurgy
Refrigeration and air conditioning
Renewable and Non Renewable Energy
Simulation & Modeling in Mechanical Engineering
Thermal Science and Engineering
EXHIBITION
An exhibition will be organized to showcase the latest
developments in industry and academia. The exhibits will
include variety of industrial materials, products,
manufacturing equipments, characterization, testing and
quality control instruments and value added services.
SOUVENIR
A souvenir will be published giving the details of the
program, abstract of the invited lecturers as well as of
technical papers to be presented at CETCME-2015, the
names of sponsors, co-sponsors, advertisements, list of
exhibitors.
PROCEEDINGS
The proceeding of the presented research papers and
keynote lectures will be published in NIET Journal of
Engineering & Technology [ISSN: 2229-5828].
AWARDS FOR BEST PAPERS
Best Research paper (Oral/Poster) award will be given for
novel solutions to industrial problems. The award carries
a Memento and a Certificate for author(s).
INTERNATIONAL ADVISORY COMMITTEE
Dr R.K.Khandal,Vice Chancellor, UPTU, Lucknow
Dr. Pradeep Kumar, Vice chancellor, DTU, New Delhi
Dr. Ibrahim Dincer, Director, CERL, Canada
Dr. Md. Sarfraz, V. Dean, Kuwait University, Kuwait
Dr. Paolo Pennacchi, MED, PD Milano, Italy
Dr. P. Bandaru, Jacobs School of Engg, California
Dr. M. Heikal, University of Brighton, UK
Dr. Wolfgang Borutzky, BRS University, Germany
Dr. Manoj Gupta, NUS, Singapore
Dr. Nitin Chopra, UA, USA
Dr. Lokeswarappa R. Dharani, MUST, USA
Dr. Sabin Kumar Mishra, HCT, UAE
Dr Anish Priyadarshi, Carlsys Tech. Singapore
Dr. M.P. Poonia, Director, NITTTR, Chandigarh
Dr. Naveen Kumar, Director, BIET Jhansi
Dr. Sudhir Kumar, RIMT, Bareilly
Dr. V. K. Jain, IIT Kanpur
Dr. P.K. Jha, MIED, IIT Roorkee
Dr. Amit Rai Dixit, ISM Dhanbad
Dr. Ram Vinoy Sharma, NIT Jamshedpur
Dr. Vikas Rastogi, DTU, Delhi
Dr. A.K. Sharma, IIT Roorkee
Dr D.K. Singh, MMMUT, Gorakhpur
Dr. Sachin Maheshwari, NSIT New Delhi
Dr. Hari Singh, NIT Kurukshetra
Dr Md. Hamiuddin, Ex-Dean, FET, AMU, Aligarh
Dr. Shalendra Kumar, NIT, Jamshedpur
Dr. Anoop Kumar Saha, NIT Durgapur
Dr. S.K. Srivastava, MMMUT, Gorakhpur
Dr. P.M. Pathak, IIT Roorkee
CALL FOR PAPERS AND POSTERS
The original unpublished research papers as per the
conference theme are invited for presentation. An
abstract of maximum 250 words and 6 keywords of the
papers are invited through email at [email protected]
After acceptance the full length paper should be
submitted through email. Details for poster are available
at event website www.cetcme-niet.webs.com.
REGISTRATION FEE
Delegate/Authors
Student/Research Scholar
(ISTE Members)
Student/Research Scholar
(Non-ISTE Members)
Delegate/Faculty Members
from Academic Institutions
(Affiliated to UPTU)
Delegate/Faculty Members
from other Academic
Institutions
Delegates form Industry
and R & D Institutions
Before
due date
After
due date
600
($50)
1000
($50)
1000
($100)
1500
($100)
1500
2000
2000
($100)
3500
($150)
4000
($150)
5000
($200)
The registration fee includes conference proceedings,
registration material, inauguration high tea, lunch and
dinner along with cultural events. An excursion trip will
be arranged to Taj Mahal for Foreign delegates and their
spouse on 22nd March 2015.
Registration Form
MODE OF PAYMENT
Through Bank Drafts
In favor of:
“N.I.E.T. Greater
Noida”
Payable at:
Greater Noida/New
Delhi
Through RTGS
Account number:
60430101010050001
Bank: Union Bank of India,
Branch: Knowledge Park
Greater Noida
IFSC code: UBIN0560430.
IMPORTANT DATES
Description
Submission of the Abstract
Intimation about acceptance
Submission of manuscript
Acceptance of paper for journal
Date
31.01.2015
07.02.2015
15.02.2015
28.02.2015
International Conference
&
Exhibition
on
Cutting Edge Technological Challenges
in Mechanical Engineering
(CETCME-2015)
in sync with
“MAKE IN INDIA”
CITY OF GREATER NOIDA
Greater Noida is part of Gautam Budh Nagar district in
Uttar Pradesh. It has one of the biggest institutional and
industrial areas in northern India. More than 60 colleges
and 100 MNCs are located in Greater Noida. There are
many places to visit in nearby region. To name a few: Red
Fort, Taj Mahal, Gurudwara Bangla Sahib, India Gate,
Qutab Minar, Akshardham Temple –Delhi.
ACCOMMODATION
Limited accommodation is available in the institute’s hostel
at nominal rates. However, accommodation will be arranged
in the Greater Noida hotels also on advance payment basis.
21st & 22nd March, 2015
(Saturday and Sunday)
Name: _______________________________________________
ISTE Membership No.________________________________
Organization/Affiliation: ____________________________
_______________________________________________________
Designation: _________________________________________
Address:______________________________ _______________
______________________________________________________
Contact No:__________________________________________
ORGANIZING COMMITTEE
CHIEF PATRON
Email: ______________________________________________
Dr. R.K.Khandal, Vice Chancellor, UPTU, Lucknow
Dr. Sarojini Agarwal, Chairperson, NIET Gr. Noida
Dr. O.P. Agarwal, MD, NIET Gr. Noida
Shri Ashok singh, Vice President, INTUC, India
Paper ID:____________________________________________
PATRON
DD No./Transaction ID:___ __________________________
Dr. Neema Agarwal, AMD, NIET, Greater Noida, UP.
Mr. Raman Batra, Director (CMC & PFS), NIET, Gr. Noida.
Prof. Pande B.B. Lal, Director General, NIET Gr. Noida
Prof. R.Kumar, OSD, NIET, Greater Noida, UP.
Date: ___________________
Details of the registration fees:
Name of bank________________________________________
Amount: ________________
CHAIRMAN
Date:
Prof. Ajay Kumar, Director, NIET, Greater Noida
Contact at: +91 9268575607, Email: [email protected]
Address for Submission & further details:
Prof. P. Pachauri, Head, Department of Mechanical
Engineering, NIET Greater Noida, UP, INDIA- 201306
Contact Nos.: +91 120 2320062, 2320132
Mobile Nos.:
+91 9911144689, 9899472101
Event website: www.cetcme-niet.webs.com
Email:
[email protected]
ORGANIZING SECRETARIES
Prof.
Prof.
Prof.
Prof.
Chandan Kumar
Kapil Kumar
S.P.Dwivedi
Sanjay Kumar
Prof.
Prof.
Prof.
Prof.
Sandeep Chauhan
H.S.Pali
Ashish Srivastava
Sweta Arya
Signature
SPONSORSHIPS
Category of
the Sponsor
Registration Form
(Sponsors and Exhibitors)
Details of what the Sponsor gets
Amount
(Rs.)
Benefit include mention on the conference backdrop banner, one exhibition stall
(3m x 6m), 6 Banners in the conference venue (provided by organization), Audio
visual presentation of 15 minutes. During break, one full page colour advertisement
in the conference souvenir and free registration for 4 delegate members.
2,50,000/(US$4000)
Co-Sponsor
Name on the backdrop, one exhibition stall (3m x 3m), 4 Banners in the conference
venue (provided by organization), 1 full page color advertisement in the souvenir,
and free registration for 4 delegate members.
1,50000
(US$2500)
Platinum
Name on the backdrop, one exhibition stall (3m x 3m), 2 Banners in the conference
venue (provided by organization), 1 full page color advertisement in the souvenir,
and free registration for 2 delegate members.
100,000
(CETCME-2015)
(US$1500)
in sync with
Sponsor
Conference
Kit
Name of organization on the kit, 1 banner in the conference hall (provided by
organization), 1 full page color advertisement in the souvenir, and free registration
for 2 delegate members.
Welcome
lunch/dinner
Name on the conference backdrop banner, 1 Banner in the conference hall, 2
Banners at the dinner venue (provided by organization), 1/2 page color
advertisement in the souvenir, and free registration for 2 delegates
Gold
Name on the conference backdrop banner, 1 Banner in the conference hall
(provided by organization), 1/2 page color advertisement in the souvenir, and free
registration for 2 delegate members.
Silver
An open exhibition will show case the latest
developments in industry and academia with a vision of
zero defect conformance in fulfillment of “Make in India”
dream by Honorable Prime minister of India. The
exhibition is likely to be attended by more than 40,000
engineering students and 2500 people from industry.
The exhibits will include variety of industrial materials,
products, manufacturing equipments, characterization,
testing and quality control instruments and value added
services. The exhibition will be located in institute
ground close to the conference ambience. It is a great
opportunity for all organization to exhibit and discuss
with the delegates as well as all professionals from end
user industries. Allotment of stalls will be done on first
come first served basis. Entry to the exhibition will be
free for all.
&
Exhibition
on
Cutting Edge Technological Challenges in
Mechanical Engineering
“MAKE IN INDIA”
21st & 22nd March, 2015
(Saturday and Sunday)
75,000
(US$1250)
Flat rate of INR 50,000/- (US $ 800) will be charged for
all standard stalls (3m x 3m). Each stall will have an
aesthetically laid and illuminated facia with the exhibitor
name. The facility will include two tables, 4 chairs, three
spot lights and power connections for electronic gadgets.
Type of Sponsorship: ________________________________
Name of Organization: ______________________________
_______________________________________________________
Address:______________________________ _______________
______________________________________________________
Name of Representatives: ____________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
Contact Nos:__________________________________________
Email: ______________________________________________
Details of the registration fees:
Name of bank________________________________________
DD No./Transaction ID:___ __________________________
Date: ____________________ ___________________________
Amount: _____________________________________________
Our organization wishes to sponsor the Conference
CETCME-2015.
Nearest Landmark: Parichowk, Greater Noida
Date:
Name on the conference backdrop banner, 1 Banner in the conference hall
(provided by organization), 1/2 page color advertisement in the souvenir, free
registration for 1 delegate member.
EXHIBITION
International Conference
60,000
(US$1000)
50,000
(US$800)
25,000
(US$500)
Standard stall will be 3m x 3m and more shall be made
available as multiples thereof.
Signature
(Seal)
For further communication:
Prof. P. Pachauri, Head, Department of Mechanical
Engineering, NIET, Greater Noida, UP, INDIA- 201306
Contact Nos.: +91 120 2320062, 2320132
Mobile Nos.:
+91 9911144689, 9899472101
Event website: www.cetcme-niet.webs.com
Email:
[email protected]