Bluetooth® Smart Mini Modules Product Brief

Bluetooth® Smart Mini Modules
Part Number: B1010SP0-1x
CEL’s MeshConnect Bluetooth® Smart Modules eliminate design risk
and significantly reduce time-to-market for Bluetooth Low Energy
wireless solutions, including programs which utilize the innovative
CSRmesh™ protocol.
These devices are footprint-compatible with CEL’s existing line of
ZigBee and Thread-based Modules, allowing designers to easily
transition between multiple wireless networking standards via dropin compatible module hardware.
The B1010SP0-1x is also compatible with CEL’s award-winning
MeshWorks platform. By employing MeshWorks, users can quickly
and easily program the B1010 for standard (i.e. non-CSRmesh)
Bluetooth Smart applications using simple Python-based scripts.
KEY FEATURES:
I/O
Supports
CSRmesh™
Available with
Avi-on Software
Interoperable with
CEL’s MeshWorks™
Platform
15 Analog/Digital
Pins
TX
Supports
UART, I2C, SPI
Supports Bluetooth® Smart v4.x
Including ATT, GATT, SMP, L2CAP, GAP
Based on the CSR1010
• Supports the CSRMesh™ protocol
• Full access to the CSR µEnergy SDK
Advanced Power Management Scheme
Optimized for battery-powered applications
Modules are 100% RF tested and pre-certified for
+8 dBm Transmit
Power (Pout)
Best-In-Class
RF Range
of 50m - 100m
Dual RF Connectivity Options
• Integrated PCB antenna
• External RF output via castellation
Surface-Mountable Package
Castellation edge connectors at
0.050” pitch for ease of assembly
Over-the-Air Programing
Supports OTA programming updates
compliance.
OTA
BLOCK DIAGRAM (B1010SP0-1)
Castellation Edge
Connector
External
EEPROM
32kHz
XTAL
16MHz
XTAL
ANT
CSR1010
MicroProcessor
Radio
SPECIFICATIONS
APPLICATIONS
 MCU: 16-bit XAP RISC
 Connected Home
with 64kB RAM + 64kB ROM
 External EEPROM: 512kb
 Frequency: 2402 to 2480MHz
Operating Voltage: 1.8 to 3.6V
Output Power: +8dBm
 RX Sensitivity: -94dBm

Operating Temp: -30°C to +85°C
 Over-the-Air Data Rate: 1Mbps
 Number of channels: 40
 RoHS Compliant
 Building Automation
 Lighting Controls
 Sports and fitness sensors
 Health sensors
 Mobile accessories
 General Bluetooth Wireless
Sensor Networking
MESHCONNECT™ BLUETOOTH® PART NUMBERS
-1C Option
with External
RF Connection
MeshConnect™ Bluetooth® Smart Mini Modules
B1010SP0-1
CSR1010 IC, +8dBm Output Power, Integrated Antenna
B1010SP0-1C
CSR1010 IC, +8dBm Output Power, Castellation RF Output
Pin for External Antenna
MeshConnect™ B1010 Bluetooth® Smart µEnergy Starter Development Kit
B1010SP0-EVB-1
Bluetooth® Smart Mini Module Evaluation Kit
MeshWorks™ Bluetooth® Smart Development Kit
Bluetooth® Smart Mini Module
Evaluation Kit (B1010SP0-EVB-1)
CEL offers a variant of CSR’s µEnergy® Starter Development Kit which
has been outfitted to support the B1010SP0-1 module. This kit enables
the rapid development of Bluetooth Smart applications and includes:
• CSR’s xIDE for µEnergy (includes compiler)
• CSR’s reference software for Bluetooth Smart profiles
• CSR’s example applications for iOS and Android smartphones
Visit meshconnect.cel.com/B1010 for more information.
BMW-KIT-1
Bluetooth® Smart MeshWorks™ Evaluation Kit
BMW-SENSOR-1
Bluetooth® Smart MeshWorks™ Sensor Node
Bluetooth® Smart MeshWorks™
Development Kit (BMW-KIT-1)
The Bluetooth Smart module is an integral part of the MeshWorks
SDK and wireless networking platform. The MeshWorks kit
contains the following:
• MeshWorks Software, including Python scripting language,
IDE, and ScriptNinja™ configuration tool
• Two Bluetooth Smart Sensor Nodes with integrated
sensors for rapidly prototyping many different applications
• Companion app to communicate with Bluetooth
4.x-equipped smartphone (used as a bridge)
Visit meshconnect.cel.com/products/MeshWorks for more information.
4590 Patrick Henry Drive • Santa Clara, CA • 95054 • 408.919.2500
meshconnect.cel.com
cel146 06.03.15
`