Bidet LUXE

Bidet LUXE
Bidet LUXE
Bidet LUXE
Bidet LUXE
LUXE Bidet LUXE
Bidet
Assembly Instruction
LUXE
LUXE
R
LUXE
LUXE
LUXE
LUXE
TM
Bidet
R
NEO250 & NEO320
NAMES AND FUNCTIONS OF PARTS
TM
*Please note: illustrations may vary depending on the model
Water Flow Control Handle
Nozzle Mode Knob
Cold & Hot Water Inlet
Adjustable Plates
Toilet
Water
Supply
Valve
1
Shut off the toilet water supply.
Flush toilet to empty the tank.
2
Remove the seat by unscrewing the seat.
Place the bidet on the toilet.
Plates may be adjusted
depending on where the two
holes in the back of the toilet are.
Top View of Toilet
Installation Tools
You May Need
Wrench
Femine Nozzle
Wash nozzle
Nozzle Guard Gate
Screwdriver(flat)
PARTS
Flexible Metal Braided Hose
(Cold Water)
1/2” T-Adapter Connection
Plastic T-Adapter
(Cold Water)
Rubber Washer
15/16” Toilet Tank Connection
22” Length
1/2” Bidet Hose
Connection
1/4” Bidet Connection
15/16” Toilet Hose Connection
Metal T-Adapter
Sink Hose
Connection
(Hot Water)
3/8”
Bidet Hose
Connection
8 mm
Sink Water
Connection
(Wall Outlet)
3/8”
Wing
Nut
Rubber Washer
Polyurethane Hose
(Hot Water)
1/4”
Bidet
Metal
Connection Wing Nut
8 mm
Metal T-Adapter
Connection
10’ Length
OPTIONAL PARTS
Flexible Water Supply Hose
15/16” Toilet Tank Connection
3
Note: You may not need to
use this part from the kit since
a typical water connection is a
flexible metal hose with a15/16”
toilet tank connection and 9/16”
toilet water supply connection.
9/16” Toilet Water
Supply Connection
Hot Water Inlet Cap
with Rubber Washer
Note: You only need this part if you
do not connect the hot water. See
troubleshooting for more details.
4
Bidet should now be aligned with
the coupling holes.
5
Screw the seat back on to the bidet
and the toilet.
Bidet LUXE
Bidet LUXE
Bidet LUXE
Bidet LUXE
LUXE Bidet LUXE
Bidet
Assembly Instruction
LUXE
LUXE
LUXE
LUXE
LUXE
6
Preparing the Plastic T-Adapter
6a
TM
Bidet
NEO250 & NEO320
R
TM
Rubber Washer
6b
6a: Make sure that there is a black rubber washer inserted at the top of the
t-adapter.
6b: If it is not already there, insert it as shown in figure 6b.
7
LUXE
R
8
Connect the metal braided hose to the plastic t-adapter.
Connecting Cold Water Supply
Toilet
Water
Supply
Valve
7a
The top of the t-adapter
connects with the water tank.
Toilet
Water
Supply
Valve
7b
7a: Make sure you have shut off the toilet water supply and flushed the
toilet to empty the tank. Disconnect the water connection from the tank.
7b: Connect the plastic t-adapter to the water supply as shown in figure 7b.
Tip: Do not use excessive force while tightening the connection. Hand tighten
then use a wrench to gently tighten one quarter or half-turn more.
9
Toilet
Water
Supply
Valve
Connect the metal braided hose to the cold water bidet inlet
Bidet LUXE
Bidet LUXE
Bidet LUXE
Bidet LUXE
LUXE Bidet LUXE
Bidet
Assembly Instruction
LUXE
LUXE
LUXE
LUXE
LUXE
10 Preparing the Metal T-Adapter
10b
10a
11 Connecting Hot Water Supply
Bidet
LUXE
R
TM
NEO250 & NEO320
10a: Make sure that
there is a black rubber
washer inserted at the
bottom of the t-adapter.
10b: If it is not already
there, insert it as shown
in figure 10b.
ASSEMBLED UNIT
R
TM
Rubber Washer
Metal T-Adapter
(Hot Water)
Metal
T-Adapter
Toilet Water
Supply Valve
11a
11b
11a: Disconnect the sink
hot water connection.
11b: Connect the metal t-adapter on the hot water connection.
11c
11d
OPTIONAL: Cut polyurethane hose
on the end that does not have a wing nut
according to bathroom dimensions.
Bidet
Polyurethane Hose
(Hot Water)
Cold Water
Connection
Hot Water
Connection
Plastic T-Adapter
(Cold Water)
Sink
Sink
Hot Water Valve
Back View of Bidet
Cold
Hot
11e
Flexible Water
Supply Hose
Cold Water Valve
TRYING YOUR BIDET FOR THE FIRST TIME
Congratulations! You are ready to use the LuxeBidet for the first time. Gently turn
the water pressure control knob to reach your desired spray pressure. The control
only regulates water pressure, not the duration of the spray.
The working pressure of this product is 50+20 psi
For more information, visit www.LuxeBidet.com.
11f
11c: Unscrew the wing nut from the metal t-adapter.
11d: Thread the polyurethane hose through the wing nut and push the end onto
the adapter.
11e: Tighten the wing nut onto the t-adapter threads to secure the connection.
11g: Attach the metal end of the hose to the hot water bidet inlet.
C
2Go Products, LLC
Bidet LUXE
Bidet LUXE
Bidet LUXE
Bidet LUXE
LUXE Bidet LUXE
Bidet
Assembly Instruction
LUXE
LUXE
R
LUXE
LUXE
LUXE
LUXE
TROUBLESHOOTING
For additional troubleshooting tips, please see our FAQs page at www.LuxeBidet.com.
Connecting the hot water supply hose.
If you have trouble pushing the polyurethane hose onto the t-adapter, hold the
hose end under hot running water to expand it slightly and try again. If you need
a hose longer than 10 feet, you may purchase a 16 foot 8 mm polyurethane
hose at www.LuxeBidet.com/accessories.
Using the bidet with only cold water.
To use the bidet with only the cold water
connected, screw the bidet inlet cap included
with the accessories onto the hot water bidet
inlet. This will prevent any backflow while the
bidet is operated.
After installing the bidet, the toilet seat sits at an angle and no longer
rests on the toilet bowl.
TM
NEO250 & NEO320
Solution 1: Gently pump the nozzle up and down by hand. It may simply be
stuck.
Solution 2: Check that the t-adapter has been drilled all the way through so
water can flow through it. If the t-adapter is blocked, please contact us for a
replacement.
Water is leaking from a connection.
Solution 1: Try reconnecting the t-adapter to ensure that all threads are catching
properly and that the connection is properly tightened.
Solution 2: If you have difficulty properly tightening the t-adapter, try wrapping a
thin layer of plumbing tape over the toilet tank or sink valve threads before
connecting the t-adapter. The plumbing tape will allow for added grip.
Solution 3: If you continue to experience a drip from the t-adapter or any other
connection, please contact us.
For other questions or concerns, please contact us at
www.LuxeBidet.com
TM
OPTIONAL ACCESSORIES
Available for Purchase at www.LuxeBidet.com/accessories
16’ Polyurethane Hose
(Hot Water)
Bidet
Connection
9’ Metal Braided Hose
(Hot Water)
Bidet
Connection
1/4”
Metal
Wing Nut
1/4”
Metal
Wing Nut
8 mm
Metal T-Adapter
Connection
8 mm
Metal T-Adapter
Connection
This polyurethane hose is a longer
version of the hose included with the
bidet.
The polyurethane hose included with
the bidet for hot water connection can
be replaced with this 9’ metal braided
hose. Please note that the length
cannot be adjusted.
Metal T-Adapter
Metal T-Adapter
with Shut-Off Valve
Apply adhesive rubber bumpers to the bottom of the seat to eliminate the gap.
Bumpers are available for purchase when you go to
www.LuxeBidet.com/accessories.
When the bidet is on, no water comes out of the spray nozzle.
Bidet
R
(Hot Water)
(Cold Water)
Sink Hose
Connection
1/2”
Rubber Washer
Bidet Hose
Connection
15/16” Toilet Tank Connection
8 mm
Sink Water
Connection
(Wall Outlet)
1/2”
Shut-Off
Valve
Wing
Nut
Rubber Washer
1/2” Bidet Hose
Connection
15/16” Toilet Hose Connection
Some households have a 1/2” hot
water connection rather than the
provided 3/8”.
This metal t-adapter has a shut-off
valve to limit or cut off cold water to
the bidet. It can be used instead of the
plastic t-adapter for the cold water
connection.
For more information, visit www.LuxeBidet.com.
C
2Go Products, LLC
`