Side Top Dipper •

Side
Dipper
Top
Dipper
• Designed to allow the milker
to reach the back teats
• Accommodates low-uddered
cows with ease
• Uses only 4 cc's per cow per
application
• Significant dip savings
• Spill proof design
• Long lasting low density
• Uses only 4 cc's per cow
per application
• Significant dip savings
• Spill proof design
• Long lasting low density
polyethylene plastic
Standard
10-32500
10-32510
10-32520
10-32530
10-32540
Foaming
10-33000
10-33010
10-33020
10-33030
10-33040
Blue Top Dipper
Clear Top Dipper
Green Top Dipper
Yellow Top Dipper
Red Top Dipper
Blue Top Dipper Foamer
Clear Top Dipper Foamer
Green Top Dipper Foamer
Yellow Top Dipper Foamer
Red Top Dipper Foamer
PowrDipper
®
polyethylene plastic
Standard
10-30000
10-30010
10-30020
10-30030
10-30040
Foaming
10-31000
10-31010
10-31020
10-31030
10-31040
Blue Side Dipper
Clear Side Dipper
Green Side Dipper
Yellow Side Dipper
Red Side Dipper
Blue Side Dipper Foamer
Clear Side Dipper Foamer
Green Side Dipper Foamer
Yellow Side Dipper Foamer
Red Side Dipper Foamer
The PowrDipper is an effective dipping system that
combines simplicity with heavy duty construction.
Because the PowrDipper hangs in an upright position,
the milker has easy access to the dipping tool and is
more likely to dip the cows than not. The patented
PowrDipper will coat the teats with sanitizer from the tips
to the base of the udder. When used with an RJB teat
dip pump, field studies have shown that an RJB
PowrDipper system can save up to 75% in teat dip usage
as compared to spraying.
Top Load
10-50100 PowrDipper Gun with 6.5" Wand
10-50101 PowrDipper Gun with 10" Wand
Bottom Load
10-50110 PowrDipper Gun with 6.5" Wand
10-50120 PowrDipper Gun with 10" Wand
10-50130 PowrDipper Gun with Ball Hook and 6.5" Wand
10-50140 PowrDipper Gun with Ball Hook and 10" Wand
The Coburn Company, Inc. • P O Box 147
phone 800-776 -7042 262-473-2822
www.coburn.com
•
•
Whitewater, WI 53190 U.S.A.
fax 800-776-7044 262-473-3522
[email protected]
PowrSprayer
• Pistol grip allows the gun to hang in
natural position
• Constructed of rugged glass-reinforced nylon
• Provides even, consistent spray pattern
• Available in four different models to accommodate
various barns and milking practices
MT2 Teat
Spray Gun
• Simple but effective spray system that
combines simplicity with low cost
• Large diameter, thick walled, hardened
stainless steel wand
• Stainless steel valve, one moving part
• Stainless steel barb and clamp for coil
attachment
• Trigger attached with stainless steel
pins, will not fall off
• Available in blue, green, yellow
10-70100 MT2 Teat Spray Gun
Quality
Milk
Isolator
Top Load
10-52100 PowrSprayer Gun with 6.5" Wand
10-52110 PowrSprayer Gun with 10" Wand
10-52120 PowrSprayer Gun with 10" Tilt Back Wand
Bottom Load
10-52300 PowrSprayer Gun with 6.5" Wand & 180 Degree Hook
10-52310 PowrSprayer Gun with 10" Wand & 180 Degree Hook
10-52320 PowrSprayer Gun with 10" Tilt Back Wand & 180
Degree Hook
10-52900 PowrSprayer Gun with 6.5" Wand & 90 Degree Ball Hook
10-52910 PowrSprayer Gun with 10" Wand & 90 Degree Ball Hook
10-52920 PowrSprayer Gun with 10" Tilt Back Wand & 90
Degree Ball Hook
MicroTouch Teat Pump
• Easy to install, hangs on wall
• Automatically supplies dip to the drops in parlor
or flat barn
• Connect intake filter line and place it in your
barrel of teat dip
• Built in on/off switch to turn unit off at the end
of milking
• Available in 110V or 220V power
10-15000 110V MicroTouch Teat Pump, complete.
10-15020 220V MicroTouch Teat Pump, complete.
Electric Teat Dip Pump
• Easy to install, hangs on wall
• Automatically supplies dip to the drops in parlor or flat barn
• Connect intake filter line and place it in your barrel of teat dip
• Built in on/off switch to turn unit off at the end of milking
• Available in 110V or 220V power
10-10000 110V Electric Teat Dip Pump, complete.
10-10020 220V Electric Teat Dip Pump, complete
For isolating one quarter of the cow’s milk from the other three
quarters, in cases of observed evidence of high somatic cell counts
in one quarter. When used as directed, A QMI can significantly
lower the SCC in the bulk milk tank which can help yield higher milk
premiums. Features 2 gallon capacity, large 4 inch opening for
cleaning, flexible silicon rubber hoses, and heavy duty stainless
steel bail to hold lid in place.
10-35000 2 Gallon Quality Milk Isolator, complete.
®
The Coburn Company, Inc. • P O Box 147
phone 800-776 -7042 262-473-2822
www.coburn.com
•
•
Whitewater, WI 53190 U.S.A.
fax 800-776-7044 262-473-3522
[email protected]
RJB0214
`