Document 105171

Directions are for size Small, Changes for
sizes Medium, Large, 1X, and 2X are in
parentheses.
To Fit Bust: 32 (36, 40, 44, 48)” (81.5 (91.5,
101.5, 112, 122) cm)
Finished Bust: 36 (40, 44, 48, 52)” (91.5
(101.5, 112. 122, 132) cm)
Finished Length: 22 (22, 23, 26, 26)” (56 (56,
58.5, 66, 66) cm)
LW3274
knitting
Special Stitches
kfb (Knit into front and back) = Knit next st
but do not remove from needle, knit into back
loop of same st and remove from needle.
ssk = Slip next two stitches as if to knit to
right needle, insert point of left needle through
front of sts, knit these sts together through
back loop.
Designed by Julie Farmer
What you will need:
RED HEART® Boutique Treasure™:
4 (5, 6, 8, 9) balls 1901 Mosaic A, 1
(1, 1, 2, 2) balls 1913 Spectrum B,
2 (2, 2, 2, 2) balls 1918 Abstract C
Susan Bates® Knitting Needles:
5.5mm [US 9] and 6mm [US 10]
Ring stitch markers, yarn needle.
GAUGE: 15 sts = 4” (10 cm); 19
rows = 4” (10 cm) in Stockinette
st (knit on right side, purl on wrong
side) with larger needles. 15 sts =
4” (10 cm); 30 rows = 4” (10 cm)
in Garter st (knit every row) with
larger needles (for mitered square).
One mitered square measures
about 4 x 4” (10 x 10 cm). CHECK
YOUR GAUGE. Use any size
needles to obtain the gauge.
Buy Yarn
RED HEART® Boutique
Treasure™, Art E788
available in 3.5 oz
(100 g), 151 yd
(138 m) balls
Mitered Square
Jacket
You’ll love wearing this stunning jacketstyle sweater! The shaded yarn makes
beautiful mitered squares without having
to change colors.
Please Note: Print this pattern using Landscape Orientation.
Find more ideas & inspiration: www.redheart.com and www.crochettoday.com
©2013 Coats & Clark
Notes
1. Back and sleeves are worked in Stockinette
stitch with Garter stitch borders.
2. Fronts are made up of three vertical strips
of mitered squares. Each mitered square
begins by picking up stitches across one
edge of the previous mitered square (if any)
and corresponding mitered square of the
previous strip (if any). This joins the mitered
squares as they are knit.
3. The topmost mitered square at the front
edge of each strip forms one-half of the
collar. Edges of each collar square are
sewn together at back neck, and lower
edge of collar is sewn to neck edge.
BACK
With smaller needles and A, cast on 68 (74,
82, 90, 98) sts.
Work in Garter st (knit every row) until piece
measures 2 (2, 3, 2, 2)” (5 (5, 7.5, 5, 5) cm)
from beginning.
Change to larger needles and work in
Stockinette st (knit on right side, purl on
wrong side) until piece measures 22 (22,
23, 26, 26)” (56 (56, 58.5, 66, 66) cm) from
beginning. Bind off.
RIGHT FRONT
First Strip of Mitered Squares
Mitered Square 1
With larger needles and A, cast on 30 sts.
Row 1 (wrong side): K15, place marker, k15.
Row 2 (right side): Knit to 2 sts before marker,
ssk, slip marker, k2tog, knit to end of row—
28 sts.
Row 3: Knit.
Rows 4–27: Repeat last 2 rows 12 times—4
sts remain.
Row 28: Ssk, remove marker, k2tog—2 sts.
Row 29: K2tog—1 st.
Do not fasten off last st.
Mitered Squares 2–5 (5, 5, 6, 6)
With right side facing and last stitch of
previous square on right needle, pick up and
k14 sts evenly across side of previous mitered
square, cast on 15 sts—30 sts.
Repeat Rows 1–29 of first square.
Repeat until there are a total of 5 (5, 5, 6, 6)
mitered squares in the strip.
Fasten off last st of last square.
Second Strip of Mitered Squares
Mitered Square 1
With larger needles and B, cast on 15 sts.
From right side, pick up and k15 sts across
right side edge of first mitered square of
previous strip—30 sts.
Repeat Rows 1–29 of first square of first strip.
Do not fasten off last st.
Mitered Squares 2–5 (5, 5, 6, 6)
With right facing and last stitch of previous
square on right needle, pick up and k14 sts
evenly across side of previous mitered square
in this strip, pick up and k15 sts evenly across
Continued...
RedHeart.com
LW3274 Mitered Square Jacket
right side edge of corresponding mitered
square in previous strip—30 sts.
Repeat Rows 1–29 of first square of first strip.
Repeat until there are a total of 5 (5, 5, 6, 6)
mitered squares in the strip.
Fasten off last st of last square.
Third Strip of Mitered Squares
Mitered Squares 1–5 (5, 5, 6, 6)
With larger needles and A, work same as
second strip until 5 (5, 5, 6, 6) mitered squares
have been made and joined to previous strip.
Do not fasten off last st of last square.
Mitered Square 6 (6, 6, 7, 7) (Collar
Extension)
With right facing and last stitch of previous
square on right needle, pick up and k14 sts
evenly across side of previous mitered square
in this strip, cast on 15 sts—30 sts.
Repeat Rows 1–29 of first square of first strip.
Fasten off last st.
Side (Underarm) Edging
Note: Do not work side edging for size S.
Sizes M (L, 1X, 2X) Only
With right side facing, larger needles, and A,
pick up and k75 (75, 90, 90) sts across long
edge of first strip of mitered squares.
Work in Garter st for 1 (2, 3, 4)” (2.5 (5, 7.5,
10) cm).
Bind off.
Lower Edging
With right side facing, smaller needles, and
A, pick up and k45 (49, 53, 57, 61) sts across
lower edge of front.
Work in Garter st for 2 (2, 3, 2, 2)” (5 (5, 7.5,
5, 5) cm).
Bind off.
LEFT FRONT
First Strip of Mitered Squares
With larger needles and C, work same as first
strip of right front, until there are a total of 6
(6, 6, 7, 7) mitered squares in the strip. The
last square is the collar extension. Fasten off
last st of last square.
Second Strip of Mitered Squares
With larger needles and B, work same as
second strip of right front, until there are a
total of 5 (5, 5, 6, 6) mitered squares in the
strip. Fasten off last st of last square.
Third Strip of Mitered Squares
With larger needles and C, work same as
second strip. Fasten off last st of last square.
Side (Underarm) Edging
Note: Do not work side edging for size S.
Sizes M (L, 1X,, 2X) Only
With right side facing, larger needles, and A,
pick up and k75 (75, 75, 90, 90) sts across
long edge of third strip of mitered squares.
Work in Garter st for 1 (2, 3, 4)” (2.5 (5, 7.5,
10) cm).
Bind off.
Lower Edging
With right side facing, smaller needles, and
A, pick up and k45 (49, 53, 57, 61) sts across
lower edge of front.
Work in Garter st for 2 (2, 3, 2, 2)” (5 (5, 7.5,
5, 5) cm).
Bind off.
SLEEVES (make 2)
With smaller needles and A, cast on 54 (54,
56, 58, 58) sts.
Work in Garter st until piece measures 2” (5 cm).
Continued...
Please Note: Print this pattern using Landscape Orientation.
Find more ideas & inspiration: www.redheart.com and www.crochettoday.com
©2013 Coats & Clark
RedHeart.com
6
FINISHING
ABBREVIATIONS
A, B, or C = Color A, Color B, or Color C; k =
knit; k2tog = knit next 2 sts together; st(s) =
stitch(es).
Please Note: Print this pattern using Landscape Orientation.
Find more ideas & inspiration: www.redheart.com and www.crochettoday.com
©2013 Coats & Clark
3
= Mitered square 3 worked with B.
B Squares shown in grey are for sizes
1X and 2X only
= Direction miter is worked
18 (18, 19, 20, 20)”
(45.5 (45.5, 48.5, 51, 51) cm)
SLEEVE
14 (14, 15, 15, 15)”
(35.5 (35.5, 38, 38, 38) cm)
side edging
C = 1918 Abstract
20 (20, 20, 24, 24)”
(51 (51, 51, 61, 61) cm)
B = 1913 Spectrum
22 (22, 23, 26, 26)”
(56 (56, 58.5, 66, 66) cm)
A = 1901 Mosaic
2 (2, 3, 2, 2)”
(5 (5, 7.5, 5, 5) cm)
Collar
Sew ends of collar extensions together. Sew
lower edge of collar to neck edging, easing to
fit. Note: Garter st is very stretchy. It may be
helpful to pin Collar before sewing, to be sure
both sides match.
Weave in ends.
5
6 (6, 7, 8, 8)”
(15 (15, 18, 20.5, 20.5) cm)
Sew shoulder seams for 6 (7, 8, 9, 10)” (15
(18, 20.5, 23, 25.5) cm). Note: The shoulder
seam is not sewn all the way across the
second strip of squares; the remaining part
of the second strip is part of the neck edge
to which the collar extension is sewn. Sew
sleeves to armhole edge centering sleeve over
shoulder seam. Sew side and sleeve seams.
4
3
2
1
A
A
A
A
A
A
6
5
4
3
2
1
B
B
B
B
B
B
6
5
4
3
2
1
C
C
C
C
C
26 (26, 27, 30, 30)”
(66 (66, 68.5, 76, 76) cm)
18 (20, 22, 24, 26)”
(45.5 (51, 56, 61, 66) cm)
7
24 (24, 24, 28, 28)”
(61 (61, 61, 71, 71) cm)
RIGHT FRONT
4”
(20 cm)
6 (6½, 7½, 8, 8½)”
(15 (16.5, 19, 20.5, 21.5) cm)
(shoulder seam)
Third Strip
4”
(10 cm)
Second Strip
BACK
8 (9, 10, 11, 12)”
(20.5 (23, 25.5, 28, 30.5) cm)
First Strip
Shape Sleeve
Change to larger needles.
Increase Row: K1, kfb, knit to last 2 sts, kfb,
k1—56 (56, 58, 60, 60) sts.
Next Row: Purl.
Repeat last 2 rows 4 (4, 5, 5, 5) more
times—64 (64, 68, 70, 70) sts.
Repeat Increase Row—66 (66, 70, 72, 72) sts.
Work in Stockinette st for 3 rows.
Repeat Increase Row—68 (68, 72, 74, 74) sts.
Repeat last 4 rows 0 (0, 0, 1, 1) more
times—68 (68, 72, 76, 76) sts.
Change to smaller needles and work in Garter
st until piece measures 6 (6, 7, 8, 8)” (15 (15,
18, 20.5, 20.5) cm) from beginning.
Bind off.
22 (22, 23, 26, 26)”
(56 (56, 58.5, 66, 66) cm)
LW3274 Mitered Square Jacket
C
C
lower edging
12”
(30.5 cm)
0 (1, 2, 3, 4)”
(0 (2.5, 5, 7.5, 10) cm)
12 (13, 14, 15, 16)”
(30.5 (33, 35.5, 38, 40.5) cm)
RedHeart.com
`